[1]李斌太, 邢丽英, 包建文, 等. 先进复合材料国防科技重点实验室的航空树脂基复合材料研发进展[J]. 航空材料学报, 2016, 36(3):92-100.
LI Bintai, XING Liying, BAO Jianwen, et al. Research and Development Progress of National Key Laboratory of Advanced Composites on Advanced Aeronautical Resin Matrix Composites[J]. Journal of Aeronautical Materials, 2016, 36(3):92-100.
[2]王兴刚,于洋,李树茂,等. 先进热塑性树脂基复合材料在航天航空上的应用[J]. 纤维复合材料,2011(2):44-47.
WANG Xinggang, YU Yang, LI Shumao, et a1. The Research on Fiber Reinforced Thermoplastic Composites[J]. Fiber Composite,2011(2):44-47.
[3]KANG H, SHAN Z, ZANG Y, et al. Effect of Yarn Distortion on the Mechanical Properties of Fiber-bar Composites Reinforced by Three-dimensional Weaving[J]. Applied Composite Materials, 2016, 23(2):119-138.
[4]吴晓川, 单忠德, 刘丰, 等. 三维织造复合材料用导向套的表面结构研究[J]. 材料导报, 2014, 28(22):1-4.
WU Xiaochuan, SHAN Zhongde, LIU Feng, et al. Research on Surface Structures of Guide Sleeves for 3D Woven Composites[J]. Materials Reports, 2014, 28(22):1-4.
[5]武永琴. 航空复合材料技术发展的回顾及展望[J]. 科技创新与应用, 2015(17):59.
WU Yongqin. Review and Prospect of Development on Aerospace Composite Technology[J]. Technology Innovation and Application, 2015(17):59.
[6]SUGAVANESWARAN M, ARUMAIKKANNU G. Modelling for Randomly Oriented Multi Material Additive Manufacturing Component and Its Fabrication[J]. Materials & Design, 2014, 54:779-785.
[7]GURR M, HOFMANN D, EHM M, et al. Acrylic Nanocomposite Resins for Use in Stereolithography and Structural Light Modulation Based Rapid Prototyping and Rapid Manufacturing Technologies[J]. Advanced Functional Materials, 2008, 18(16):2390-2397.
[8]GRIFFINI G, INVERNIZZI M, LEVI M, et al. 3D-printable CFR Polymer Composites with Dual-cure Sequential IPNs[J]. Polymer, 2016, 91:174-179.
[9]SALAZAR A, RICO A, RODRIGUEZ J, et al. Fatigue Crack Growth of SLS Polyamide 12:Effect of Reinforcement and Temperature[J]. Composites, Part B:Engineering, 2014, 59:285-292.
[10]FLOERSHEIM R B, HOU G, FIRESTONE K. CFPC Material Characteristics and SLS Prototyping Process[J]. Rapid Prototyping Journal, 2009, 15(5):339-345.
[11]YAN C, HAO L, XU L, et al. Preparation, Characterisation and Processing of Carbon Fiber/Polyamide-12 Composites for Selective Laser Sintering[J]. Composites Science & Technology, 2011, 71(16):1834-1841.
[12]SOOD A K, OHDAR R K, MAHAPATRA S S . Parametric Appraisal of Mechanical Property of Fused Deposition Modelling Processed Parts[J]. Materials & Design, 2010, 31(1):287-295.
[13]HOSSAIN S M, ESPALIN D, RAMOS J, et al. Improved Mechanical Properties of Fused Deposition Modeling-manufactured Parts through Build Parameter Modifications[J]. Journal of Manufacturing Science and Engineering, 2014, 136(6):061002.
[14]SUN Q, RIZVI G M, BELLEHUMEUR C T, et al. Effect of Processing Conditions on the Bonding Quality of FDM Polymer Filaments[J]. Rapid Prototyping Journal, 2008, 14(2): 72-80.
[15]AGARWALA M K, JAMALABAD V R, Langrana N A, et al. Structural Quality of Parts Processed by Fused Deposition[J]. Rapid Prototyping Journal, 1996, 2(4):4-19.
[16]AHN S H, AND S R, WRIGHT P K, et al. Anisotropic Material Properties of Fused Deposition Modeling ABS[J]. Rapid Prototyping Journal, 2002, 8(4):248-257.
[17]TEKINALP H L, KUNC V, VELEZ-GARCIA G M, et al. Highly Oriented Carbon Fiber-polymer Composites via Additive Manufacturing[J]. Composites Science and Technology, 2014, 105:144-150.
[18]NING F, CONG W, HU Y, et al. Additive Manufacturing of Carbon Fiber-reinforced Plastic Composites Using Fused Deposition Modeling:Effects of Process Parameters on Tensile Properties[J]. Journal of Composite Materials, 2017, 51(4):451-462.
[19]SHOFNER M L, LOZANO K, RODRíGUEZ-MACAS F J, et al. Nanofiber-reinforced Polymers Prepared by Fused Deposition Modeling[J]. Journal of Applied Polymer Science, 2003, 89(11):3081-3090.
[20]LEON A C D, CHEN Q, PALAGANAS N B, et al. High Performance Polymer Nanocomposites for Additive Manufacturing Applications[J]. Reactive & Functional Polymers, 2016, 103:141-155.
[21]DICKSON A N, BARRY J N, MCDONNELL K A, et al. Fabrication of Continuous Carbon, Glass and Kevlar Fibre Reinforced Polymer Composites Using Additive Manufacturing[J]. Additive Manufacturing, 2017, 16: 146-152.
[22]MATSUZAKI R, UEDA M, NAMIKI M, et al. Three-dimensional Printing of Continuous-fiber Composites by In-nozzle Impregnation[J]. Scientific Reports, 2016, 6:23058.
[23]KLIFT F V D, KOGA Y, TODOROKI A, et al. 3D Printing of Continuous Carbon Fibre Reinforced Thermo-plastic CFRTP Tensile Test Specimens[J]. Open J. Compos. Mater, 2016, 6(1):18-27.
[24]JUSTO J, TVARA L, GARCA-GUZMN L, et al. Characterization of 3D Printed Long Fibre Reinforced Composites[J]. Composite Structures, 2017, 185:537-548.
[25]CAMINERO M A, CHACN J M, GARC-AMORENO I, et al. Impact Damage Resistance of 3D Printed Continuous Fibre Reinforced Thermoplastic Composites Using Fused Deposition Modelling[J]. Composites, Part B:Engineering, 2018, 148:93-103.
[26]TIAN X, LIU T, YANG C, et al. Interface and Performance of 3D Printed Continuous Carbon Fiber Reinforced PLA Composites[J]. Composites, Part A:Applied Science and Manufacturing, 2016, 88:198-205.
[27]YANG C, TIAN X, LIU T, et al. 3D Printing for Continuous Fiber Reinforced Thermoplastic Composites:Mechanism and Performance[J]. Rapid Prototyping Journal, 2017, 23(1):209-215.
[28]LI N, LI Y, LIU S. Rapid Prototyping of Continuous Carbon Fiber Reinforced Polylactic Acid Composites by 3D Printing[J]. Journal of Materials Processing Technology, 2016, 238:218-225. |