HAN Qinglin, GAO Jia, LI Xinlei, ZHANG Guangjun. Constituent and Property Adjustment of Deposited Metals by Dissimilar Auxiliary Wire Feed Gas Metal Arc-based Additive Manufacturing[J]. China Mechanical Engineering, 2022, 33(07): 858-863.
[1]ZHANG J, SONG B, YANG L, et al. Microstructure Evolution and Mechanical Properties of TiB/Ti6Al4V Gradient-material Lattice Structure Fabricated by Laser Powder Bed Fusion[J]. Composites Part B—Engineering, 2020, 202(1):108417.
[2]王迪, 邓国威, 杨永强, 等. 金属异质材料增材制造研究进展[J]. 机械工程学报, 2021, 57(1):186-198.
WANG Di, DENG Guowei, YANG Yongqiang, et al. Research Progress on Additive Manufacturing of Metallic Heterogeneous Materials[J]. Journal of Mechanical Engineering, 2021, 57(1):186-198.
[3]李鹏, 乔凤斌, 王飞, 等. 异种高性能热塑性材料旋转摩擦铆接工艺研究[J]. 中国机械工程, 2019, 30(19):2372-2377.
LI Peng, QIAO Fengbin, WANG Fei, et al. Research on Rotary Friction Riveting Technology of Heterogeneous High Performance Thermoplastic Materials[J]. China Mechanical Engineering, 2019, 30(19):2372-2377.
[4]马维东, 李淑娟, 杨磊鹏, 等. 功能梯度材料的低温挤压成形过程建模与实验研究[J]. 中国机械工程, 2019, 30(13):1600-1606.
MA Weidong, LI Shujuan, YANG Leipeng, et al. Modeling and Experimental Study on Freeze-form Extrusion Fabrication of FGMs[J]. China Mechanical Engineering, 2019, 30(13):1600-1606.
[5]ABE T, SASAHARA H. Dissimilar Metal Deposition with a Stainless Steel and Nickel-based Alloy Using Wire and Arc-based Additive Manufacturing[J]. Precision Engineering, 2016, 45(1):387-395.
[6]SHIN G, YOON J H, KIM D W, et al. A Study on the Influence of Laser Power on the Microstructure and Mechanical Properties of Functionally Graded Materials Produced by Direct Energy Deposition[J]. Korean Journal of Metals and Materials, 2020, 58(11):782-792.
[7]SHEN C, PAN Z, MA Y, et al. Fabrication of Iron-rich Fe-Al Intermetallics Using the Wire-arc Additive Manufacturing Process[J]. Additive Manu-facturing, 2015, 7(1):20-26.
[8]DONG B, PAN Z, SHEN C, et al. Fabrication of Copper-rich Cu-Al Alloy Using the Wire-arc Additive Manufacturing Process[J]. Metallurgical and Materials Transactions B, 2017:48(1):3143-3151.
[9]黄健康, 潘伟, 于永龙, 等. 基于示踪粒子的GTAW驼峰焊道形成机制数值分析[J]. 兰州理工大学学报, 2019, 45(6):11-16.
HUANG Jiankang, PAN Wei, YU Yonglong, et al. Numerical Analysis of Formation Mechanism of GTAW Hump Welding Bead Based on Tracing Particles[J]. Journal of Lanzhou University of Techkology, 2019, 45(6):11-16.
[10]SOMASHEKARA M A, SURYAKUMAR S. Studies on Dissimilar Twin-wire Weld-deposition for Additive Manufacturing Applications[J]. Transactions of the Indian Institute of Metals, 2017, 70(8):2123-2135.
[11]HAN Q L, GAO J, HAN C L, et al. Experimental Investigation on Improving the Deposition Rate of Gas Metal Arc-based Additive Manufacturing by Auxiliary Wire Feeding Method[J]. Welding in the World, 2021, 65(1):35-45.
[12]BHOLE S D, NEMADE J B, COLLINS L, et al. Effect of Nickel and Molybdenum Additions on Weld Metal Toughness in a Submerged Arc Welded HSLA Line-pipe Steel[J]. Journal of Materials Processing Technology, 2006, 173(1):92-100.
[13]杨东青. GTA旁路GMA增材制造成形工艺及热过程研究[D]. 哈尔滨:哈尔滨工业大学, 2017.
YANG Dongqing. Research on Forming Technology and Thermal Process of GMA Additive Manufacturing with GTA Bypass[D]. Harbin:Harbin Institute of Technology, 2017.
[14]刘龙, 李南, 罗志强. 某型装甲车用履带断裂分析[J]. 物理测试, 2020, 38(2):22-27.
LIU Long, LI Nan, LUO Zhiqiang. Analysis ofCracking in Tracks for a Type of Armored Vehicle[J]. Physics Examination and Testing, 2020, 38(2):22-27.