[1]Balendra R. Economic Considerations in Die — formCompensation for Net forming[J].Journal of Ma-terial Processing Technology, 2001, 115 (2) : 260 -263.
[2]Liu B C,Kang J W,Xiong S M. A Study on the Nu-merical Simulation of Thermal Stress during the So-lidification of Shaped Casting[J].Science and Tech-nology of Advanced Materials,2001,2( 1) : 21-23.
[3]姜不居.熔模铸造手册[M].北京.:机械工业出版社,2000.
[4]Dong Yiwei,Bu Kun,Dou Yangqing,et al. Determi-nation of Interfacial Heat—transfer Coefficient dur-ing Investment — casting Process of Single — crystalBlades[J].Journal of Materials Processing Technol-ogy,2011,211(12) :2123-2131.
[5]刘瑞麟.关于叶片陶瓷型芯研制与生产专业化的思考[J].航空科学技术,1994(2):22-25.
[6]柳百成,荆涛等编著.铸造工程的模拟仿真与质量控制[M],2001:281.
[7]张军.一种复杂空心叶片外形模具的改进[J].材料工程,1997(2):33-35.
[8]顾国红,曹腊梅.熔模铸造空心叶片用陶瓷型芯的发展[J].铸造技术,2002,23(2):81-83.
[9]Gaiantucci L M, Tricarico L. A Computer—aidedApproach for the Simulation of the Directional So-lidification Process for Gas Turbine Blades[J].Jour-nal of Materials Processing Technology, 1998,77(1/3):160-165.
[10]Ferreira J C, Mateus A. A Numerical and Experi-mental Study of Fracture in RP StereolithographyPatterns and Ceramic Shells for Investment Cast-ing[J].Journal of Materials Processing Technolo-gy ,2003 ,134(1) : 135-144.
[11]于靖[1],许庆彦[1],柳百成[1].铸钢件熔模精密铸造凝固过程数值模拟[J].铸造,2006,55(5):473-476.
[12]薛明[1],曹腊梅[1],刘世忠[1],李嘉荣[1].定向凝固过程中型芯、型壳温度场数值模拟[J].热加工工艺,2006,35(21):86-87.
[13]卜昆[1],王虹[1],周桐[1],李世峰[1],沈翔鸿[1].精铸空心涡轮叶片模具虚拟修模方法[J].航空学报,2011,32(3):538-545.
[14]黄胜利[1],卜昆[1],程云勇[1],周丽敏[1].涡轮叶片密集点云数据与CAD模型配准方法[J].中国机械工程,2011,22(14):1699-1703.
[15]程云勇[1],张定华[1],张顺利[1],卜昆[1].CAD模型引导的涡轮叶片密集测量数据分割[J].中国机械工程,2009(18):2214-2218.
[16]刘金钢[1],卜昆[1],杨小宁[1],程云勇[1],董一巍[1].基于中弧线的空心涡轮叶片壁厚计算方法研究[J].中国机械工程,2012,23(9):1025-1028. |