定子偏斜角对正脉冲器压力信号的影响

中国机械工程 ›› 2014, Vol. 25 ›› Issue (8): 1017-1020.

定子偏斜角对正脉冲器压力信号的影响

赵常青1;刘凯1;赵桐1;贾桑2;马颖2

1.西安理工大学,西安,710048
2.中国石油集团测井有限公司,西安,710054

出版日期:2014-04-25 发布日期:2014-05-06
基金资助:
“十二五”国家科技重大专项(2011ZX05020-002)；国家自然科学基金资助项目(51275409)；陕西省科技计划资助项目(2012JQ7009)

Impact of Stator's Inclination Angle on Pressure Signals of Positive Pulse Generator

Zhao Changqing1;Liu Kai1;Zhao Tong1;Jia Sang2;Ma Ying2

1.Xi'an University of Technology,Xi'an,710048
2.CNPC Logging Co., Ltd., Xi'an,710054

Online:2014-04-25 Published:2014-05-06
Supported by:
National Science and Technology Major Project ( No. 2011ZX05020-002);National Natural Science Foundation of China（No. 51275409）；Shanxi Provincial Science and Technology program ( No. 2012JQ7009)

摘要/Abstract

摘要：

为了提高随钻正脉冲测井仪的信号强度,需要对定子偏斜角角度及偏斜特性进行优化。依据计算流体力学的方法建立了不同的定子偏斜角数值计算模型,分析了偏斜角对旋转阀压力信号幅值和速度场分布规律的影响,并通过试验验证了优化结果的合理性。结果表明:定子流域特性对信号强度有很大影响,压力信号幅值随定子偏斜角的减小而减小;单边偏斜比双边偏斜的压力信号强度大。

关键词: 随钻正脉冲测井仪, 信号强度, 旋转阀, 设计

Abstract:

To increase the signal strength of PP-MWD, considerable optimization of the inclination angle and defection characteristics were needed. Numerical simulation models for different inclination angles were developed by means of computational fluid dynamics techniques. Analysis was made to study the impacts of changing the inclination angles of stators on the amplitude and velocity of pressure signals of rotary valves. The reasonability of theoretical analysis was validated by experiments. The results show that the stator's flowing area influences on the pressure signal of logging tools by a large extent. As the inclination angles of stator decrease, the pressure signal amplitude gets smaller. The inclination at the both sides gets stronger pressure signals than unilateral inclination. Research results are instructive and meaningful to the design of rotary valves of PP-MWD.

Key words: positive pulse measurement-while-drilling(PP-MWD), signal strength, rotary valve, design

中图分类号:

TE927

赵常青, 刘凯, 赵桐, 贾桑, 马颖. 定子偏斜角对正脉冲器压力信号的影响[J]. 中国机械工程, 2014, 25(8): 1017-1020.

Zhao Changqing, Liu Kai, Zhao Tong, Jia Sang, Ma Ying. Impact of Stator's Inclination Angle on Pressure Signals of Positive Pulse Generator[J]. China Mechanical Engineering, 2014, 25(8): 1017-1020.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2014/V25/I8/1017

参考文献

[1]Arps J J,Arps J L.The Subsurface Telemetry Problem-a Practical Solution[J]. Journal of Petroleum Technology, 1964, 16(5): 487-493.
[2]房军,苏义脑.液压信号发生器基本类型与信号产生的原理[J].石油钻探技术,2004,32(2):39-41.
Fang Jun,Su Yinao.The Basic Types and It’s Mechanism of the Hydraulic Signal Producer[J].Petroleum Drilling Techniques, 2004,32(2):39-41.
[3]Malone D, Johnson M. Logging While Drilling Tools, Systemm, and Methods Capable of Transmitting Data at a Plurality of Different Frequencies:United States,US005375098A[P].1994-12-20.
[4]Lavrut E,Kante A,Rellinger P,et al.Pressure Pulse Generator for Downhole Tool:United States,US6970398 B2[P].2004-08-12.
[5]Lea H Y.Drilling Axial Vibration and Wave Propagation in Borehole[D].Cambridge:Massachusetts Institute of Technology, 1991.
[6]Lea S H.Propagation of Coupled Pressure Waves in Borehole with Drillstring[C]//International Conference on Horizontal Well Technology.Calgary,1996:963-972.
[7]马哲,杨锦舟,赵金海.无线随钻测量技术的应用现状与发展趋势[J].石油钻探技术,2007,35(6):112-115.
Ma Zhe,Yang Jinzhou,Zhao Jinhai.Status Quo and Development Trend of MWD Technique[J].Petroleum Drilling Techniques, 2007,35(6):112-115.
[8]刘修善,苏义脑.泥浆脉冲信号的传输速度研究[J].石油钻探技术,2000,28(5):24-26.
Liu Xiushan,Su Yinao.Study on Transmission Velocity of Mud Pulse Signal[J].Petroleum Drilling Techniques, 2000, 28(5): 24-26.
[9]王翔,王瑞和.钻井液连续脉冲信号频域传输速度影响因素[J].中国石油大学学报,2008,32(5):54-57,66.
Wang Xiang,Wang Ruihe.Influence Factor of Transmission Velocity in Frequency Domain of Drilling-fluid Consecutive Pulse Signal[J].Journal of China University of Petroleum,2008,32(5):54-57,66.
[10]Wylie B E,Streeter V L.Fluid Transients[M].New York:McGraw-Hill International Book Company,1978.
[11]金朝铭,液压流体力学[M].北京:国防工业出版社,1994.
[12]Ansys Inc. Ansys Fluent 120 User’s Guide[M].New York:Ansys Inc.,2009.

[1]	王国彪, 赖一楠, 范大鹏, 杨华勇, 王时龙. 新型精密传动机构设计与制造综述 [J]. J4, 201016, 21(16): 1891-1897.
[2]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[3]	朱潇, 沈惠平, 李菊, 李涛, 叶鹏达, 朱伟. 可轮换用动平台三自由度并联机构的拓扑设计及其性能分析[J]. 中国机械工程, 2026, 37(1): 114-125.
[4]	耿宇航, 何雪明, 高宗. 基于NURBS啮合线的高效双螺杆转子自适应设计方法[J]. 中国机械工程, 2025, 36(12): 2837-2845.
[5]	王旭浩, 盛卧龙, 吴孟丽, 许贻龙, 赵晓巍, 曹轶然. 可伸缩蛇形臂机器人的设计及运动学建模[J]. 中国机械工程, 2025, 36(12): 2885-2893.
[6]	贺乐君, 习毅, 刘文, 严翔, 忻明杰, 王朝阳. 压力倍放高精感知机构设计方法研究[J]. 中国机械工程, 2025, 36(11): 2601-2608.
[7]	钱志源, 李念洹, 李俊烨, 李军, 韩超, 吴海红. 基于视觉检测技术和仿形设计的导电滑环轴向接触位置测试方法[J]. 中国机械工程, 2025, 36(11): 2641-2651.
[8]	李阳, 韦红余. 内花键电解整形阴极导流结构优化与试验[J]. 中国机械工程, 2025, 36(11): 2658-2664.
[9]	陈武超, 俞翔栋, 何昆, 张济民. 模块化多胞元永磁推力轴承的承载特性[J]. 中国机械工程, 2025, 36(10): 2300-2305.
[10]	许雷, 胡俊山, 凡志磊, 葛恩德, 张胜平, 田威. 大型民用飞机机身对接区双面均衡夹紧装置设计[J]. 中国机械工程, 2025, 36(10): 2444-2452.
[11]	张益鑫, 苗忆南, 易智恒, 万文静, 王兴坚, 曾松, 王少萍. 新型可变形串联管道检测机器人：设计、建模及实验[J]. 中国机械工程, 2025, 36(09): 2140-2149.
[12]	谷孙权, 张海柱, 黎荣, 饶坝, 汪豪. 基于Lotka-Volterra模型的复杂产品设计指标分解关联定量分析[J]. 中国机械工程, 2025, 36(07): 1479-1486.
[13]	王云帆1, 2, 朱利斌1, 2, 崔创创1, 2, 黄海鸿1, 2. 基于拆卸信息提取的多零件堆叠结构设备动态干涉分析方法[J]. 中国机械工程, 2025, 36(06): 1269-1279.
[14]	尚欣1, 陈宇2. 刚强约束的主轴结构设计研究[J]. 中国机械工程, 2025, 36(05): 995-1007.
[15]	李鹏1, 2, 3, 4, 李梦聪1, 4, 肖立波2, 3, 王一棠1, 4, 宋学官1, 4, 阳领5. 基于多保真度代理模型的混凝土泵车臂架销轴轻量化设计[J]. 中国机械工程, 2025, 36(04): 821-829.