#br#
Finite Element Analysis Method and Simulation System for Flexible Skin NC Trimming over a Reconfigurable Fixture

Abstract

Abstract:

Aircraft skin NC trimming technology based on reconfigurable fixture is a part of the new generation of skin digital manufacturing process.Ensuring the rigidity of process system is a troublesome problem of its practical applications.In order to verify the stability of the skin trimming process,the skin milling process simulation via element birth and death method was introduced and a trimming numerical simulation analysis system based on ABAQUS was developed.Combined with the milling force theoretical model and milling tests,a 2024-T3 aluminum skin milling force prediction model was established to obtain accurate milling force for simulation analysis.Lastly,several simulation examples were carried out,and the results indicate that the system
can predict the stress distribution and vibration during flexible skin trimming process.
The developed system provides a reliable technical guarantee for the practical
applications of this new technology.

Key words: reconfigurable fixture, skin trimming, finite element simulation, milling force

摘要：

基于可重构柔性工装的蒙皮数控切边技术属于新一代蒙皮数字化制造工艺,保证工艺系统刚度是该技术实际应用的难点之一。为了校验切边过程的稳定性,利用单元生死技术实现了蒙皮切边过程的有限元仿真,并基于ABAQUS平台开发了切边数值模拟分析系统，预测切边轨迹的振动情况。为了给仿真分析提供精确的铣削力，结合铣削力理论模型和铣削力试验,建立了航空铝合金蒙皮材料2024-T3的铣削力预测模型。最后给出了仿真分析实例,结果表明,该系统可以预测柔性夹持下的蒙皮切边过程的应力、振动,能为蒙皮数控切边技术的生产实际应用提供技术保障。

关键词: 可重构柔性工装, 蒙皮切边, 有限元仿真, 铣削力

CLC Number:

TP391.9

TAO Ji, LI Dong-Sheng, HU Fu-Wen, LI Xiao-Jiang. #br# Finite Element Analysis Method and Simulation System for Flexible Skin NC Trimming over a Reconfigurable Fixture[J]. China Mechanical Engineering, 2012, 23(14): 1701-1706,1711.

姚洁, 李东升, 胡福文, 李小强. 蒙皮柔性夹持数控切边的有限元分析方法及系统开发[J]. 中国机械工程, 2012, 23(14): 1701-1706,1711.

References

[1]李东升[1],胡福文[1],李小强[1],肖军杰[1],朱明华[2],桑阳[2],徐应强[2].基于可重构柔性工装夹持的飞机蒙皮数控切边关键技术及发展[J].航空制造技术,2009(23):26-29.
[2]Saffar R J, Razfar M R, Zarei O, et al. Simulation of Three--dimention Cutting Force and Tool Deflec- tion in the End Milling Operation Based on Finite Element Method[J]. Simulation Modelling Practice and Theory,2008,10(16) :1677-1688.
[3]唐志涛.航空铝合金残余应力及切削加工变形研究 [D].山东大学,2008:
[4]沈正华.钛合金薄壁结构铣削变形有限元仿真及加工参数优化[D].南京航空航天大学;南京航空航天大学,2009:
[5]韩丽丽.薄壁零件加工变形的预测及其仿真研究[D].哈尔滨工业大学,2009:
[6]陆俊百[1],周凯[1],张伯鹏[1].飞行器薄壁件柔性工装定位/支承阵列优化自生成研究[J].中国机械工程,2010(19):2369-2374.
[7]航空制造工程手册总编委员会.飞机钣金工艺[M].北京:航空工业出版社,1992.
[8]丁韬[1].TORRESMILL和TORRESTOOL系统蒙皮切边钻铣床及柔性夹具装置[J].航空制造技术,2007(2):108-109.
[9]甄瑞.飞机蒙皮加工柔性夹具控制系统的研究[D].哈尔滨工业大学,2009:
[10]杨勇.钛合金航空整体结构件铣削加工变形的预测理论及方法研究 [D].浙江大学机械与能源工程学院,2007:
[11]方刚,曾攀.切削加工过程数值模拟的研究进展[J].力学进展,2001,31(3):394-404.
[12]Jitender K R, Paul X. Finite Element Method Based Machining Simulation Environment for AnalyzingPart Errors Induced during Milling of Thin- walled Components [J]. International Journal of Machine Tools and Manufacture, 2008,48 (6) : 629- 643.
[13]成群林.航空整体结构件切削加工过程的数值模拟与实验研究 [D].浙江大学,2006:
[14]毕运波.铣削加工过程物理仿真及其在航空整体结构件加工变形预测中的应用研究 [D].浙江大学机械与能源工程学院,2007:
[15]王立涛,柯映林,黄志刚.航空铝合金7050-T7451铣削力模型的实验研究[J].中国机械工程,2003,14(19):1684-1686.
[16]Budak E. Mechanics and Dynamics of Milling Thin-- walled Structures [D]. Vancouver: University of British Columbia, 1994.
[17]胡创国.薄壁件精密切削变形控制与误差补偿技术研究 [D].西北工业大学,2007:
[18]Tamas S. Cutting Force Modeling using Artificial Neural Networks[J]. Journal of Materials Process- ing Technology,1999(92-93) :344-349.
[19]Wan M,Zhang W H,Tan G,et al. An In--depth Analysis of the Synchronization between the Meas- ured and Predicted Cutting Forces for Developing Instantaneous Milling Force Model[J]. Internation- al Journal of Machine Tools & Manufacture,2007, 47: 2018-2030.
[20]刘军海.切削力建模方法及仿真研究[D].西安理工大学,2009:

#br# Finite Element Analysis Method and Simulation System for Flexible Skin NC Trimming over a Reconfigurable Fixture

蒙皮柔性夹持数控切边的有限元分析方法及系统开发

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	DONG Guo-Jiang, DIAO Chang-Cai, CAO Miao-Yan, HAO Hai-Bin, YANG Dong-Feng. Study on Wall-thickness and Deformation Regularity of Cylinder Part Based on Solid Granules Medium Forming [J]. J4, 201016, 21(16): 1992-1998.
[2]	LI Qiang, GUO Chenguang, ZHAO Lijuan, LENG Yuefeng, YUE Haitao. Milling Force Modeling of DD5 Ni-based Single Crystal Superalloy with Crystallographic Anisotropic Characteristics [J]. China Mechanical Engineering, 2021, 32(06): 734-740.
[3]	XU Peng, ZENG Hongming, ZHU Chenlu, WANG Ping, GENG Ming, XU Yong. High Speed Track Defect Detection Methods Based on Enhanced Magnetic Field Eddy Currents [J]. China Mechanical Engineering, 2021, 32(04): 454-459,466.
[4]	LIU Tao;ZHANG Lifang. Parameter Solution of Instantaneous Milling Force Model of Variable Cross-section Scroll Plates Based on Improved PSO Algorithm [J]. China Mechanical Engineering, 2020, 31(24): 2943-2949.
[5]	LIU Meng, SHAN Zhongde, LI Xinya, ZANG Yong, HUANG Jianghua. Research on Solid Solution Forming Processes of Typical Automotive Structural Parts with 6016 Aluminum Alloy [J]. China Mechanical Engineering, 2020, 31(22): 2648-2654.
[6]	XU Yong, LI Ming, XIA Liangliang, ZHANG Shihong, . Hydro-mechanical Forming Process Combined with Multi-directional Local Loading for Special-shaped Exhaust Pipes [J]. China Mechanical Engineering, 2020, 31(22): 2763-2771.
[7]	YUE Caixu;LIU Xin;LIU Zhibo;XIE Na;WANG Yanwu. Tool Optimization for Splicing Die Milling Processes Based on Finite Element Simulation [J]. China Mechanical Engineering, 2020, 31(17): 2085-2094.
[8]	GAO Cheng;ZHANG Rui;HUANG Jiaoying;ZHAO Dong. Finite Element Simulation Analyses and Tests on Internal Temperatures of Electrical Connectors under High Temperatures [J]. China Mechanical Engineering, 2019, 30(15): 1867-1872.
[9]	SHI Wentian;HAN Dong;LIU Yude;HOU Yanjun. Surface Quality of Aramid Fiber Composites with Ultra-low Temperature and Micro-milling [J]. China Mechanical Engineering, 2019, 30(09): 1056-1064.
[10]	CUI Guohua1;LIU Jian1;MA Liang2;CUI Kangkang1. Design and Mechanics Performance Analysis of a Concrete Pipe End Grinding Robot [J]. China Mechanical Engineering, 2019, 30(06): 665-671.
[11]	YU Hui, , ZOU Haibei, LI Wei, ZHAI Jianwei, LIU Ligang, . Safety Assessments of Rails with Crack Defects Based on SINTAP-FAD Method [J]. China Mechanical Engineering, 2019, 30(03): 271-278.
[12]	LI Chengyang. Design of Tamping, Stabilization, Measurement Integrated Simulation Vehicles by Using Finite Element Method [J]. China Mechanical Engineering, 2019, 30(03): 359-364.
[13]	LI Lun1，2;ZHAO Deyang1，2;LI Jishun1，2，3;XUE Yujun2;ZOU Shengyong3;MA Wei1，2;YANG Shaodong1，2. Simulation and Experiments of Tension Changes of Steel Wire in Bending Wire Rope Strands [J]. China Mechanical Engineering, 2018, 29(19): 2269-2276.
[14]	PENG Ruitao1;LI Zhongping1;HUANG Xiaofang1;TANG Xinzi1;HU Yunbo2. Applications of Pressurized Internal Cooling Method in Superalloy Grinding Processes [J]. China Mechanical Engineering, 2017, 28(16): 2008-2015.
[15]	Yi Renhui;Zhou Zude;Liu Mingyao;Ji Dongliang. Dynamic Strain Transfer Laws of Surface Bonded FBGSs [J]. China Mechanical Engineering, 2016, 27(24): 3362-3367.