1.College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,210016
2.Department of Geometric Measurement,Nanjing Institute of Measurement and Testing Technology,Nanjing,210049
ZHAO Guolong, XIN Lianjia, LI Liang, WANG Min, HAO Xiuqing, HE Ning. Study on Damage Mechanism of High-volume Fraction Silicon Aluminum Alloy Milled with Diamond Coated Cutting Tools[J]. China Mechanical Engineering, 2022, 33(02): 153-159.
[1]SILVA L F M D. Materials Design and Applications[M]. Heidelberg:Springer International Publishing, 2017.
[2]ZHANG P R, LIU Z Q, DU J, et al. Correlation between the Microstructure and Machinability in Machining Al-(5-25)wt%Si Alloys[J]. Proceedings of the Institution of Mechanical Engineers Part B:Journal of Engineering Manufacture, 2020, 234(9):1173-1184.
[3]张深圳, 牛秋林, 李爽, 等. 硅铝合金表面缺陷形成机理及其加工工艺优化研究进展[J]. 宇航材料工艺, 2021, 51(1):10-16.
ZHANG Shenzhen, NIU Qiulin, LI Shuang, et al. Advances in Surface Defect Formation Mechanism and Machining Process Optimization of Si-Al Alloy[J]. Aerospace Materials & Technology, 2021, 51(1):10-16.
[4]SUN H, LI A, ZHOU Y H, et al. Dry Wear Characteristics of Machined ZL109 Aluminum-silicon Alloy Surface under Unidirectional and Reciprocating Rolling-contact Friction[J]. Surface Topography:Metrology and Properties, 2020, 8(1):015001.
[5]刘小莹, 郭佳, 陈宏, 等. 硬质合金刀具铣削高硅铝合金CE11的摩擦特性研究[J]. 机床与液压, 2018(7):78-81.
LIU Xiaoying, GUO Jia, CHEN Hong, et al. Research on Friction Characteristics of Cemented Carbide Tool for Milling High Silicon Aluminum Alloy CE11[J]. Machine Tool & Hydraulics, 2018(7):78-81.
[6]UHLMANN E, FLGEL K, SAMMLER F, et al. Machining of Hypereutectic Aluminum Silicon Alloys[J]. Procedia CIRP, 2014, 14:223-228.
[7]徐骁. 硅铝合金外壳激光气密封装技术优化与验证[D]. 南京:东南大学, 2019.
XU Xiao. Optimization and Validation of Laser Gastight Packaging Technology for Si-Al Shell[D]. Nanjing:Southeast University, 2019.
[8]CUI C, SCHULZ A, SCHIMANSKI K, et al. Spray Forming of Hypereutectic Al-Si Alloys[J]. Journal of Materials Processing Technology, 2009, 209(11):5220-5228.
[9]李斐. Al-27%Si合金扩散焊性能研究[D]. 哈尔滨:哈尔滨工业大学, 2020.
LI Fei. Study on Diffusion Welding Properties of Al-27%Si Alloy[D]. Harbin:Harbin Institute of Technology, 2020.
[10]文均, 雷基林, 邓晰文, 等. 活塞结构对其传热及强度的影响分析[J]. 中国机械工程, 2019, 30(19):2287-2293.
WEN Jun, LEI Jilin, DENG Xiwen, et al. Influence Analysis of Piston Structure on Heat Transfer and Strength[J]. China Mechanical Engineering, 2019, 30(19):2287-2293.
[11]SANTOS M C, MACHADO A R, SALES W F, et al. Machining of Aluminum Alloys:a Review[J]. International Journal of Advanced Manufacturing Technology, 2016, 86:3067-3080.
[12]RAHAMAN M L, ZHANG L. An Investigation into the Friction and Wear Mechanisms of Aluminium High Silicon Alloy under Contact Sliding[J]. Wear, 2017, 376/377:940-946.
[13]LIU J, CHOU Y K. On Temperatures and Tool Wear in Machining Hypereutectic Al-Si Alloys with Vortex-tube Cooling[J]. International Journal of Machine Tools & Manufacture, 2007, 47(3/4):635-645.
[14]BAROOAH R K, ARIF A, PAIVA J M, et al. Wear of Form Taps in Threading of Al-Si Alloy Parts:Mechanisms and Measurements[J]. Wear, 2019, 442/443:203153.
[15]徐志伟, 王振亚. T/R组件封装用铝硅合金高速铣削试验研究[J]. 电子机械工程, 2018, 34(6):47-50.
XU Zhiwei, WANG Zhenya. Experimental Study on High-speed Milling of Al-Si Alloy for T/R Module Packaging[J]. Electro-mechanical Engineering, 2018, 34(6):47-50.
[16]CHEN N C, SUN F H. Cutting Performance of Multilayer Diamond Coated Silicon Nitride Inserts in Machining Aluminum-silicon Alloy[J]. Transactions of Nonferrous Metals Society of China, 2013, 23(7):1985-1992.
[17]RAO A G, DESHMUKH V P, PRABHU N, et al. Enhancing the Machinability of Hypereutectic Al-30Si Alloy by Friction Stir Processing[J]. Journal of Manufacturing Processes, 2016, 23:130-134.
[18]ZHOU Y, SUN H, LI A, et al. FEM Simulation-based Cutting Parameters Optimization in Machining Aluminum-silicon Piston Alloy ZL109 with PCD Tool[J]. Journal of Mechanical Science and Technology, 2019, 33(7):3457-3465.
[19]余宗宁, 周利平, 刘晓莹, 等. TiAlN涂层铣刀铣削CE11高硅铝合金的刀具磨损分析[J]. 工具技术, 2019, 53(4):47-51.
YU Zongning, ZHOU Liping, LIU Xiaoying, et al. Analysis of Tool Wear in Milling CE11 High Si-Al Alloy with TiAlN Coated Cutters[J]. Tool Technology, 2019, 53(4):47-51.