微量润滑平面磨削接触区换热机理的研究

中国机械工程 ›› 2014, Vol. 25 ›› Issue (6): 826-831.

微量润滑平面磨削接触区换热机理的研究

毛聪1,2;邹洪富1,2;黄勇1,2;周志雄3

1.长沙理工大学,长沙,410114
2.工程车辆安全性设计与可靠性技术湖南省重点实验室,长沙,410114
3.湖南大学,长沙,410082

出版日期:2014-03-26 发布日期:2014-04-11
基金资助:
国家自然科学基金资助项目(51005024,51375061);湖南省教育厅科技计划资助项目(13K054)

Research on Heat Transfer Mechanism in Grinding Zone for MQL Surface Grinding

Mao Cong1,2;Zou Hongfu1,2;Huang Yong1,2;Zhou Zhixiong3

1.Changsha University of Science & Technology,Changsha,410114
2.Key Laboratory of Safety Design and Reliability Technology for Engineering Vehicle,Hunan Province,Changsha,410114
3.Hunan University,Changsha,410082

Online:2014-03-26 Published:2014-04-11
Supported by:
National Natural Science Foundation of China（No. 51005024,51375061）;Hunan Provincial Science and Technology Program of Ministry of Education of China（No. 13K054）

摘要/Abstract

摘要：

磨削接触区材料去除厚度是不一致的,同时,在微量润滑过程中,雾滴之间的运动特征存在差异且易受其他因素的影响,致使整个接触区的磨削温度分布呈现出非线性,换热机理也异常复杂。从雾化机理出发,对影响换热效果的两个关键因素——雾滴直径和雾滴速度进行了分析。依据雾滴在不同壁温处表现出的不同换热特性，将磨削区划分为无沸腾换热、核态沸腾换热、过渡沸腾换热和稳定膜态沸腾换热四个不同的换热区域,建立了微量润滑磨削区的换热系数数学模型。在此基础上，运用有限元技术对微量润滑磨削表面的温度场进行了仿真分析，采用单级热电偶技术测量了磨削温度，发现磨削区仿真温度值与实验测量值吻合较好，表明通过该理论获得的微量润滑磨削表面换热系数是可信的。

关键词: 平面磨削, 微量润滑, 换热机理, 换热系数, 沸腾

Abstract:

The material removal thickness in the grinding zone was changing along the grinding direction during MQL grinding. The movement characteristics of the droplets were different and easily affected by the spraying parameters. Therefore, the temperature distribution in the grinding zone was exhibited highly nonlinear characteristics, and the heat transfer mechanism for the MQL surface grinding was extremely complex. The two important factors(namely, the diameter and speed of the droplet) which influenced on the heat transfer in the grinding zone were analyzed according to the atomization mechanism. Based on the difference of heat transfer characteristics for the droplet at different surface temperatures, the grinding zone was divided into four different heat transfer zones: non-boiling, nucleate boiling, transitional boiling and stable film boiling. The related mathematical models of heat transfer coefficient in the grinding zone were established. In addition, the temperature field in the grinding zone was simulated by using the finite element method(FEM) and measured by single pole thermocouple method.It is found that the FEM results and experimental results are very close, which demonstrates that the theory of surface heat transfer coefficient during MQL surface grinding is creditable.

Key words: surface grinding, minimum quantity lubrication(MQL), heat transfer mechanism, heat transfer coefficient, boiling

中图分类号:

TG580.15

毛聪, 邹洪富, 黄勇, 周志雄. 微量润滑平面磨削接触区换热机理的研究[J]. 中国机械工程, 2014, 25(6): 826-831.

Mao Cong, Zou Hongfu, Huang Yong, Zhou Zhixiong. Research on Heat Transfer Mechanism in Grinding Zone for MQL Surface Grinding[J]. China Mechanical Engineering, 2014, 25(6): 826-831.

参考文献

[1]Mao C,Zhou Z X,Zhang J,et al.An Experimental Investigation of Affected Layers Formed in Grinding of AISI 52100 Steel[J]. International Journal of Advanced Manufacturing Technology,2011,54(5):515-523.
[2]Tawakoli T,Hadad M J,Sadeghi M H,et al.An Experimental Investigation of the Effects of Workpiece and Grinding Parameters on Minimum Quantity Lubrication-MQL Grinding[J].International Journal of Machine Tools and Manufacture, 2009,49(12):924-932.
[3]Tasdelen B,Thordenberg H,Olofsson D.An Experimental Investigation on Contact Length during Minimum Quantity Lubrication(MQL) Machining[J].Journal of Materials Processing Technology,2008,203(1):221-231.
[4]梅国晖,孟红记,武荣阳,等.高温表面喷雾冷却传热系数的理论分析[J].冶金能源,2003,23(6):18-22.
Mei Gouhui,Meng Hongji,Wu Rongyang,et al.Analysis of Spray Cooling Heat Transfer Coefficient on High Temperature Surface[J]. Energy for Metallurgical Industry,2004,23(6):18-22.
[5]Deb S,Yao S C.Analysis on Film Boiling Heat Transfer of Impacting Spray[J].Heat Mass Transfer,1989,32(11):2099-2112.
[6]Shen B,Shih A J,Tung S C.Application of Nanofluids in Minimum Quantity Lubrication Grinding[J].Tribology Transactions, 2008, 51(6):730-737.
[7]冯宝富,蔡光起,潘贤君,等.高速磨削冷却液的注入新方法[J].机床与液压, 2002,2:173-175.
Feng Baofu,Cai Guangqi,Pan Xianjun,et al.Coolant Supplying Methods in High-speed Grinding[J].Machine Tool & Hydraulics, 2002,2:173-175.
[8]张春燕.MQL切削机理及其应用基础研究[D].镇江: 江苏大学,2008.
[9]王喜忠,于才渊,周才君.喷雾干燥[M].北京:化学工业出版社,2003.
[10]刘濂.喷流冷却的传热解析[J].钢铁,1984,19(4):63-70.
Liu Lian.Analysis of Heat Transfer during Spray Cooling[J].Iron and Steel,1984,19(4):63-70.
[11]张靖周,常海萍.传热学[M].北京:科学出版社,2009.
[12]刘振华.喷雾冷却时沸腾临界热通量的实验研究[J].上海交通大学学报, 1997,31(2):61-65.
Liu Zhenhua.Experimental Study on the Boiling Critical Heat Flux of Mist Cooling[J].Journal of Shanghai Jiao Tong University,1997,31(2):61-65.
[13]Cabrera E.Heat Flux Correlation for Spray Cooling in the Nucleate Boiling Regime[J].Experimental Heat Transfer, 2003,16(1):19-44.
[14]陈文奎,罗行,张春明,等.小温差喷雾碰壁蒸发的实验研究[J].工程热物理学报,2007,28(2):277-279.
Chen Wenkui,Luo Xing,Zhang Chunming,et al.Experimental Study on Spray Impinging Evaporation under Small Temperature Differences[J].Journal of Engineering Thermophysics,2007,28(2):277-279.
[15]Visaria M,Mudawar I.Effects of High Subcooling on Two-phase Spray Cooling and Critical Heat Flux[J].International Journal of Heat and Mass Transfer,2008,51(11):2398-2410．
[16]王亚青.喷雾冷却无沸腾区换热特性研究[D].合肥:中国科学技术大学,2010.
[17]叶立,童正明,朱汝红,等.喷雾强化对流换热[J].化工进展,2006,25(z1):248-252.
Ye Li,Tong Zhengming,Zhu Ruhong,et al.Characters of Heat Transfer Processes under Spray Conditions[J].Chemical Industry and Engineering Progress,2006,25(z1):248-252.
[18]毛聪,周志雄,周德旺,等.平面磨削温度场三维数值仿真的研究[J].中国机械工程,2009,20(5):589-595.
Mao Cong,Zhou Zhixiong,Zhou Dewang,et al.Research on Three Dimensional Finite Element Simulation of the Temperature Field in Surface Grinding[J].China Mechanical Engineering,2009,20(5):589-595.