6-UPS并联机床误差分布特性

中国机械工程 ›› 2014, Vol. 25 ›› Issue (2): 179-185.

6-UPS并联机床误差分布特性

陈小岗1,2;孙宇1;吴海兵2;刘远伟2

1.南京理工大学,南京,210094
2.淮阴工学院,淮安,223003

出版日期:2014-01-25 发布日期:2014-02-19
基金资助:
江苏省高校自然科学基础研究项目（12KJA460001，12KJB460001）；江苏省数字化制造技术重点建设实验室开放基金资助项目（HGDML-0607）；淮阴工学院科研基金资助项目（HGC1016）

Distribution of Position and Orientation Errors for a 6-UPS Parallel Machine Tool

Chen Xiaogang1,2;Sun Yu1;Wu Haibing2;Liu Yuanwei2

1.Nanjing University of Science and Technology,Nanjing,210094
2.Huaiyin Institute of Technology,Huai'an,Jiangsu,223003

Online:2014-01-25 Published:2014-02-19
Supported by:
Jiangsu Provincial Natural Science Foundation of Higher Education of China（No. 12KJA460001，12KJB460001）

摘要/Abstract

摘要：

为确定6-UPS交叉杆式Stewart型并联机床BJ-04-02(A)的加工精度特性,运用逆向思维方式,从刀具平台发生给定位置误差、姿态误差时驱动杆长度的变化中获得机床精度信息。计算了工作空间内各位置点、各姿态下刀具平台发生给定位置误差、姿态误差时驱动杆长度的变化量;通过极值、倒数等运算，获得了单位杆长误差引起的刀具平台位置、姿态误差的上下限，并给出了位姿误差在工作空间内的分布特性。

关键词: Stewart, 并联机构, 并联机床, 精度, 误差, 分布

Abstract:

A forward kinematics analysis for Stewart mechanism was extremely difficult, so the error analysis can not be carried out easily because it depended on forward kinematics solutions. To estimate the manufacturing accuracy of 6-UPS parallel machine tool BJ-04-02(A), which adopted a cross-link variation of Stewart mechanism as feeding mechanism, the principle of reverse thinking was adopted, thus the accuracy can be reflected by the change of link length for given pose(position and orientation) errors of cutter-platform. For each position point and orientation in workspace, the length changes of six actuating links were calculated for given pose errors of cutter-platform. Then the pose error limits of cutter-platform caused by link length unit error were obtained by extremum and reciprocal calculation. Finally the distributions of pose errors in workspace were provided.

Key words: Stewart, parallel mechanism, parallel machine tool, accuracy, error, distribution

中图分类号:

TP242
TP391

陈小岗, 孙宇, 吴海兵, 刘远伟. 6-UPS并联机床误差分布特性[J]. 中国机械工程, 2014, 25(2): 179-185.

Chen Xiaogang, Sun Yu, Wu Haibing, Liu Yuanwei. Distribution of Position and Orientation Errors for a 6-UPS Parallel Machine Tool[J]. China Mechanical Engineering, 2014, 25(2): 179-185.

参考文献

[1]张曙,Heisel U.并联运动机床[M].北京：机械工业出版社,2003．
[2]乔俊伟,詹永麒,王旭永.6-SPS并联平台位置姿态误差分析[J].机械科学与技术,2001,20(1):58-59．
Qiao Junwei,Zhan Yongqi,Wang Xuyong.Error Analysis of the Position and Posture of a 6-SPS Parallel Platform[J]. Mechanical Science and Technology,2001,20(1):58-59．
[3]吕崇耀,熊有伦.Stewart并行机构位姿误差分析[J].华中理工大学学报,1999,27(8):4-6．
Lü Chongyao,Xiong Youlun.The Pose Error Analysis of the 6-6 SPS 6 DOF Stewart In-Parallel Mechanisms[J]. J. Huazhong Univ. of Sci. & Tech., 1999, 27(8): 4-6．
[4]Kim H S,Choi Y J.The Kinematic Error Bound Analysis of the Stewart Platform[J].Journal of Robotic Systems, 2000, 17(1):63-73.
[5]邹豪,王启义,余晓流,等.并联Stewart机构位姿误差分析[J].东北大学学报(自然科学版),2000,21(3):301-304．
Zou Hao,Wang Qiyi,Yu Xiaoliu,et al.Pose Error Analysis of the Stewart Platform[J]. Journal of Northeastern University (Natural Science),2000,21(3):301-304．
[6]Wang Shihming,Ehmann K F.Error Model and Accuracy Analysis of a Six-DOF Stewart Platform[J].Journal of Manufacturing Science and Engineering,2002,124:286-295.
[7]王启明,张辉,汪劲松,等.一种串并联式Stewart平台机构的误差分析[J].工具技术,2002,36(12):11-13．
Wang Qiming,Zhang Hui,Wang Jingsong,et al.Error Analysis of Serial-parallel Stewart Platform Mechanism[J].Tool Engineering,2002,36(12):11-13．
[8]赵强.并联6自由度运动模拟平台的误差分析[J].机械设计,2006,23(10):52-54．
Zhao Qiang.Error Analysis on the Simulative Platform with a Parallel 6 DOF Movement[J].Journal of Machine Design, 2006, 23(10):52-54．
[9]洪林,赵新华，张策，等.并联6-SPS位姿误差分析[J].天津理工学院学报,2004,20(2):34-36．
Hong Lin, Zhao Xinhua,Zhang Ce,et al.Pose Error Analysis of 6-SPS Stewart Platform[J].Journal of Tianjin Institute of Technology,2004,20(2):34-36．
[10]Frisoli A,Solazzi M,Bergamasco M.A New Method for the Estimation of Position Accuracy in Parallel Manipulators with Joint Clearances by Screw Theory[C]//2008 IEEE International Conference on Robotics and Automation. Pasadena, CA, 2008:837-844.
[11]黄田,汪劲松.Gough_Stewart平台运动学设计理论与方法[J].中国科学(E辑),1999,29(4):310-320．
Huang Tian,Wang Jingsong.Theory and Method of Kinematics Design for Gough_Stewart Platform[J].Science in China, Series E, 1999,29(4):310-320．

[1]	李小力, 陈威, 闫蓉. 基于BP神经网络的空间轮廓误差自适应补偿 [J]. J4, 201016, 21(16): 1902-1906.
[2]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[3]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[4]	姚运萍, 王智渊. 螺栓连接受载能量损失与结合面参数识别 [J]. J4, 201016, 21(16): 1941-1943,1951.
[5]	郑华林1;项锡平1;胡腾1;米良2;刘雁3. 五轴加工中心旋转轴几何误差元素区别建模辨识技术[J]. 中国机械工程, 2021, 32(05): 547-555.
[6]	孔晓瑶1,2;袁松梅1,2;朱光远1,2;张文杰1,2. 微量润滑系统参数对雾化特性的影响[J]. 中国机械工程, 2021, 32(05): 579-586.
[7]	唐斌, 范志勇, 项载毓, 吴元科, 黄博, 莫继良, . [轮轨磨耗及预测]高速列车制动摩擦块切入端特征对制动界面特性的影响[J]. 中国机械工程, 2021, 32(04): 412-419.
[8]	孙毅;祝利豪;毛亚郎;鲁沛奇;黄韶炜. 近球壁射流空泡溃灭对微细颗粒破碎效果的影响[J]. 中国机械工程, 2020, 31(24): 2910-2917，2923.
[9]	龚峻山;方跃法;靳晓东. 基于并联手指结构的多功能灵巧手的设计与研究[J]. 中国机械工程, 2020, 31(23): 2837-2846.
[10]	陈光耀, 李恒, 贺子芮, 马俊, 李光俊, 付颖. [成形过程的数据挖掘与深度学习方法]基于机器学习的管材弯曲回弹有效预测与补偿[J]. 中国机械工程, 2020, 31(22): 2745-2752.
[11]	胡瑞;杜雪松;朱才朝. 精密加工变齿厚内齿轮插齿刀设计[J]. 中国机械工程, 2020, 31(21): 2535-2541.
[12]	胡腾1,3;王文款1;殷国富2;杨随先2. 基于螺旋理论的卧式加工中心空间误差建模方法及其量化验证[J]. 中国机械工程, 2020, 31(21): 2547-2556.
[13]	焦东风;刘志峰. 低成本低噪声的驱动桥零部件精度优化方法[J]. 中国机械工程, 2020, 31(20): 2505-2511.
[14]	吴锦辉1,2；陶友瑞1,2. 工业机器人定位精度可靠性研究现状综述[J]. 中国机械工程, 2020, 31(18): 2180-2188.
[15]	郑国峰1,2；朱红国1；伍晨波1；肖攀1,2. 极值超出量服从广义Pareto分布的载荷谱外推方法研究[J]. 中国机械工程, 2020, 31(18): 2262-2267.