基于曲面细分与变形的汽车造型设计方法

中国机械工程 ›› 2013, Vol. 24 ›› Issue (13): 1835-1840.

基于曲面细分与变形的汽车造型设计方法

郭磊1,2;吉晓民1;胡钢1;初建杰3

1.西安理工大学,西安,710048
2.电子科技大学中山学院,中山,528402
3.西北工业大学,西安,710072

出版日期:2013-07-10 发布日期:2013-07-11
基金资助:
国家高技术研究发展计划(863计划)资助项目（2009AA093303）；国家自然科学基金资助项目（51105310）；陕西省教育厅基金资助项目（2013JK1029）
National High-tech R&D Program of China (863 Program) （No. 2009AA093303）;

National Natural Science Foundation of China（No.）;
Shanxi Provincial Foundation of Ministry of Education of China（No. 2013JK1029）

Car Form Design Based on Subdivision and Deformation

Guo Lei1,2;Ji Xiaomin1;Hu Gang1;Chu Jianjie3

1.Xi'an University of Technology,Xi'an,710048
2.Zhongshan Institute,University of Electronic and Technology of China,Zhongshan,Guangdong,528402
3.Northwestern Polytechnical University,Xi'an,710072

Online:2013-07-10 Published:2013-07-11
Supported by:

National High-tech R&D Program of China (863 Program) （No. 2009AA093303）;

National Natural Science Foundation of China（No.）;
Shanxi Provincial Foundation of Ministry of Education of China（No. 2013JK1029）

摘要/Abstract

摘要：

基于曲面细分与变形原理,提出由设计师提供带有多个变形通道信息的初始汽车简单曲面造型,造型细节则交由用户在可全局或局部变形的曲面模型上直接调整，结合用户反馈的参数调整数据获得最终汽车造型方案的设计方法。该方法的应用过程中，用户参与了设计工作，在对汽车造型进行评价的同时进行了形态的再设计，可以有效表达用户对汽车造型风格的个人期望，也使设计师获得多个用户对汽车造型期望的直接数据。该方法操作简便，可迅速获得多个汽车造型方案，从而提高汽车造型设计效率。

关键词: 造型设计, 细分, 变形, 汽车

Abstract:

A method for car form design based on subdivision and deformation technology was proposed herein.Firstly,the designer provided a basic simple mesh model of the car with multi-deformation channels and subdivided the car model.Then the detailed form was modified by the users according to the locally changeable models.Finally,the dseigner determined the final car form through statistic analysis of the feedbacks from the users.In this process,the redesign and the evaluation of the car form were carried out at same time.As a result,this method makes the users express personal expectations for car form,and enables the designer to obtain the direct data of the users' expected car form.This method is easy to conduct,and can obtain many car form solutions,which is able to promote the better communication and makes the design process more efficient.

Key words: form design, subdivision, deformation, car

中图分类号:

U463.82

郭磊1, 2, 吉晓民1, 胡钢1, 初建杰3. 基于曲面细分与变形的汽车造型设计方法[J]. 中国机械工程, 2013, 24(13): 1835-1840.

GUO Lei-1, 2, JI Xiao-Min-1, HU Gang-1, CHU Jian-Jie-3. Car Form Design Based on Subdivision and Deformation[J]. China Mechanical Engineering, 2013, 24(13): 1835-1840.

参考文献

[1]孙守迁,黄琦,潘云鹤.计算机辅助概念设计研究进展[J].计算机辅助设计与图形学学报,2003,15(6):643-650.
Sun Shouqian,Huang Qi,Pan Yunhe.Progress of Research on Computer-aided Conceptual Design[J].Journal of Computer Aided Design & Computer Graphics,2003,15(6):643-650.
[2]刘弘,刘希玉,唐明晰.支持外观造型创新设计的计算机辅助设计环境[J].计算机辅助设计与图形学学报,2003,15(10):1258-1262.
Liu Hong,Liu Xiyu,Tang Mingxi.Supporting Creative Configuration Design in a Computer-aided Design Environment[J].Journal of Computer Aided Design & Computer raphics,2003,15(10):1258-1262.
[3]李桂琴,刘肖健,李洁，等.产品设计过程中的感知建模研究[J].计算机工程与应用,2004,40(31):179-182.
Li Guiqin,Liu Xiaojian,Li Jie,et al.An Investigation on Perception Modeling in Design Process[J].Computer Engineering and Applications,2004,40(31):179-182.
[4]Bézier P.Numerical Control:Mathematics and Applications[M].New York:John Wiley and Sons,1972.
[5]Piegl L,Tiller W.Surface Skinning Revisited[J].Visual Compute,2002,18(6):273-283.
[6]Vergeest S M,CAD Surface Data Exchage Using STEP[J].Computer Aided Design,1991,20(8):269-281.
[7]Riesenfeld R F.An Algorithm for High Speed Curve Generation[J].Computer Graphics and Image Processing,1974(3):346-349.
[8]Catmull E,Clark J.Recursively Generated B-spline Surfaces on Arbitrary Topological Meshes[J].CAD,1978,10(6):350-355.
[9]Sederberg T,Parry S.Free Form Deformations of Solid Geometric Models[J].Computer Graphics,1986,20:151-160.
[10]Couqillart S.Extended Free-form Deformation:a Sculpturing Tool for 3D Geometric Modeling[J].Computer Graphics,1990,24:187-196.
[11]Kalra P,Mnagili A,Thalmnna N M,et al.Simulation of Facial Muscle Actions Based on Rational Free from Deformations[J].Computer Graphics Forum,1992,11:56-69.
[12]Wooding D S.Fixation Maps:Quantifying Eye-Movement Traces[C]//Proceedings of the Eye Tracking Research & Applications Symposium,New York:ACM,2002:31-36.

[1]	赵金涛, 王帮峰, 牟常伟, 宁素娟. 波纹式结构柔性蒙皮拉伸变形与应变研究 [J]. J4, 201016, 21(16): 1959-1963.
[2]	赵伟, 王志远, 周志立. 载重汽车连续下坡弯道路段制动稳定性仿真研究 [J]. J4, 201016, 21(16): 2010-2015.
[3]	林歆悠, 周斌豪, 夏玉田. 融合动态能耗与路网信息的电动汽车充电路径规划策略[J]. 中国机械工程, 2021, 32(06): 705-713.
[4]	乔巍1;姚卫星1,2. 剪滞效应对复合材料固化变形影响的数值分析[J]. 中国机械工程, 2021, 32(05): 611-616,623.
[5]	龙江启1;林坚1;陈先兵2;王子宁2. 通风制动盘结构参数对制动抖动的敏感性[J]. 中国机械工程, 2020, 31(24): 2966-2971.
[6]	张宁;李田;殷国栋;吴建华;赵子乾. 转向系参数对汽车拖车组合系统稳定性的影响[J]. 中国机械工程, 2020, 31(21): 2521-2528.
[7]	李强;郭辰光;丁广硕;冷岳峰;岳海涛. DD5镍基单晶高温合金铣削亚表面损伤研究[J]. 中国机械工程, 2020, 31(21): 2638-2645.
[8]	王林1;潘骏1;贺青川1;丁炜2;顾利威2. 后倾式离心风机叶轮机器人焊接工艺优化[J]. 中国机械工程, 2020, 31(19): 2379-2387.
[9]	李佳伟;杜文浩;韩长庆. 慢刀伺服车削刀具半径定向补偿的分段逼近求解[J]. 中国机械工程, 2020, 31(17): 2017-2023.
[10]	沈建邦;肖俊华;梁希;徐耀玲. 负泊松比曲边内凹蜂窝结构的面内冲击动力学数值研究[J]. 中国机械工程, 2020, 31(16): 1998-2004.
[11]	聂昕1;肖兵兵1;申丹凤2;郭文峰1. 考虑变形热和摩擦热效应的热力耦合冲压研究[J]. 中国机械工程, 2020, 31(16): 2005-2015.
[12]	张洪昌, 郭军, 赵伟, 密兴林, 曾娟. 超视界路况下网联汽车的辅助驾驶方法[J]. 中国机械工程, 2020, 31(14): 1666-1671.
[13]	王明远1;杭鲁滨1;刘哲2;黄晓波1;陈勇2;缪宏3. 含变自由度力自适应复位组合柔顺副的汽车门锁机构[J]. 中国机械工程, 2020, 31(12): 1437-1443.
[14]	李曦;袁军堂;汪振华;章波. 基于Rayleigh-Ritz法的钛合金薄壁件非均匀余量加工变形控制研究[J]. 中国机械工程, 2020, 31(11): 1378-1385.
[15]	聂松林1;李硕1;尹方龙1;周鑫1;胡臻2. 水液压泵柱塞套变形特性的流固耦合研究[J]. 中国机械工程, 2020, 31(10): 1135-1141.