利用压电层提高变截面Beck杆的稳定性研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (19): 2359-2363.

利用压电层提高变截面Beck杆的稳定性研究

杨峰1,2;王忠民1

1.西安理工大学,西安,710048

2.宝鸡文理学院,宝鸡,721007

出版日期:2010-10-10 发布日期:2010-10-20
基金资助:
国家自然科学基金资助项目(10872163)；陕西省教育厅科学研究基金资助项目(08JK394)
National Natural Science Foundation of China（No. 10872163）;
Shanxi Provincial Science Research Foundation of Ministry of Education of China（No. 08JK394）

Improving Dynamic Stability of Varying Cross-section Beck’s Column with Piezoelectric Layers

Yang Feng1,2;Wang Zhongmin1

1.Xi’an University of Technology, Xi’an, 710048

2.Baoji College of Arts and Science,Baoji,Shaanxi,721007

Online:2010-10-10 Published:2010-10-20
Supported by:

National Natural Science Foundation of China（No. 10872163）;
Shanxi Provincial Science Research Foundation of Ministry of Education of China（No. 08JK394）

摘要/Abstract

摘要：

对一定边界条件下的变截面Beck杆,通过在其表面特定位置粘贴压电片,并施加电场于压电片来提高其稳定性。建立了含端部集中质量的压电层合变截面Beck杆的计算模型,导出分段表示的运动微分方程。利用微分求积法分析了压电片几何物理参数对Beck杆的动态稳定性的影响。研究结果表明,粘贴压电片可以有效提高Beck杆的稳定性。

关键词:

变截面, Beck杆, 压电片, 稳定性, 微分求积法

Abstract:

To improve the stability of a varying cross-section Beck’s column with certain boundary conditions, an external voltage was applied on the piezoelectric layers bonded on the surfaces of Beck’s column. The mathematical model of the piezoelectric composite varying cross-section Beck’s column was established and the differential equations of motion were derived. With DQ method, the effect of geometrical and physical parameters of piezoelectric layers on the stability of varying cross-section Beck’s column were studied. Stability of Beck’s column can be improved by the piezoelectric layers.

Key words:

varying cross-section, Beck’s column, piezoelectric layers, stability, differential quadrature(DQ) method

中图分类号:

O326

杨峰, 王忠民.

利用压电层提高变截面Beck杆的稳定性研究

[J]. 中国机械工程, 2010, 21(19): 2359-2363.

YANG Feng, WANG Zhong-Min.

Improving Dynamic Stability of Varying Cross-section Beck’s Column with Piezoelectric Layers

[J]. China Mechanical Engineering, 2010, 21(19): 2359-2363.

参考文献

[1]Beck M. Die Knicklast des Einseitig Eingespannten Tangential Gedrtickten Stabes[J]. J Angew Mathimatics & Physics, 1952, 3(1): 476-477.
[2]Bolotin V V. Non--conservative Problems of the Theory of Elastic Stability[M]. New York:Macmillan, 1963.
[3]Koiter W T. Unrealistic Follower Forces[J]. Journal of Sound and Vibration, 1996,194(1):636-638.
[4]Sugiyama Y, Langthjem M A, Ryu B J. Realistic Follower Forces [J]. Journal of Sound and Vibration, 1999, 225(4) :779-782.
[5]Elishakoff I. Controversy Associated with the So-called" Follower Forces": Critical Overview[J].Applied Mechenical Review, 2005,58(1): 117-142.
[6]Hauger W, Vetter K. Influence of an Elastic Foundation on the Stability of a Tangentially Loaded Column[J]. Journal of Sound and Vibration, 1976,47 (1) : 296-299.
[7]Atanackvic T M, Weticanin L. Dynamics of Inplane Motion of a Robot Arm[M]//Acar M, Makra J,Penney E eds. Mechatronics-the Basis for New Intdustrial Development. Boston: Computational Mechanics Publication, 1994: 147-152.
[8]Matsude H, Sakiyama T, Morita C. Variable Cross Sectional Beck' s Column Subjected to Non-conservative Load[J]. Zeitsehrift fur Angwandte Mathematik und Mechanik (ZAMM), 1993,73(1) : 383- 385.
[9]Kounadis A N. The Existence of Regions of Divergence Instability for Non--conservative Systems under Follower Forces [J].Int. Journal of Solids Structure, 1983, 19(1): 725-733.
[10]Irie T, Yamada G, Takahashi I. Vibration and Stability of a Non- uniform Timoshenko Beam Subjected to a Follower Force[J]. Journal of Sound and Vibration, 1980,70(1): 503-512.
[11]Lee S Y, Kuo Y H. Exact Solutions for the Non-conservative Elastic Stability of Non-uniform Columns[J]. Journal of Sound and Vibration, 1992, 155(1): 291-301.
[12]Chen Y Z. Interaction between Compressive Force and Vibration Frequency for a Varying Crosssection Cantilever under Action of Generalized Follower Force[J]. Journal of Sound and Vibration,2003, 259(4) .. 991-999.
[13]Wang Q,Teik C. Complex Analysis of Flutter and Buckling of Beams under Rotational and Transverse Spring Constraints[J]. Advances in Structural Engineering, 2004, 7(1): 21-32.

[1]	赵伟, 王志远, 周志立. 载重汽车连续下坡弯道路段制动稳定性仿真研究 [J]. J4, 201016, 21(16): 2010-2015.
[2]	刘勇, 周一帆, 许铠通, 姜伟. 车辆动力装置变刚度隔振新方法[J]. 中国机械工程, 2021, 32(06): 741-747,755.
[3]	郑鑫;赵又群;王秋伟;张陈曦. 匹配机械弹性车轮的电子稳定控制器参数分析[J]. 中国机械工程, 2020, 31(23): 2883-2890.
[4]	张宁;李田;殷国栋;吴建华;赵子乾. 转向系参数对汽车拖车组合系统稳定性的影响[J]. 中国机械工程, 2020, 31(21): 2521-2528.
[5]	谢冬福1;罗玉峰1,2;石志新1;刘燕德2. 多移动机器人协同模式及其倾翻稳定性研究[J]. 中国机械工程, 2020, 31(20): 2472-2485.
[6]	李舒雅1;谷正气1,2;黄泰明3;刘俊1;郑乐典1. 不同侧风工况下汽车稳定性双向耦合研究[J]. 中国机械工程, 2019, 30(19): 2276-2286.
[7]	李海青；赵又群. 机械弹性车轮结构参数对汽车侧翻稳定性的影响[J]. 中国机械工程, 2019, 30(13): 1519-1527.
[8]	汪选要1,2,3;程义1;程煜1;叶友东1,2. 低附着系数路面车道保持模型预测控制及汽车稳定性控制[J]. 中国机械工程, 2019, 30(09): 1018-1025.
[9]	程熊豪1,2;石端伟1,2;李红享1;夏热2;张阳1;周吉1. 高扬程全平衡卷扬式垂直升船机系统稳定性分析[J]. 中国机械工程, 2019, 30(08): 919-925.
[10]	张磊1,2;冷杰武1,2;龚粤1,2. 悬臂式货架立体仓货位智能优化[J]. 中国机械工程, 2019, 30(04): 467-471,479.
[11]	池茂儒, 蔡吴斌, 梁树林, 李奕潇, 孙建锋, 金学松, 何翔. [表面强化及损伤机理]高速铁路钢轨打磨偏差对车辆动力学性能的影响[J]. 中国机械工程, 2019, 30(03): 261-265,283.
[12]	刘彬1;潘贵翔1;李鹏1;姜甲浩1;刘爽1;刘兆伦2. 液压缸非线性弹簧力下的轧机特性及控制[J]. 中国机械工程, 2018, 29(24): 2925-2932.
[13]	李姣;皮大伟;王洪亮;李育龙. 电动车用电机式主动稳定杆多模式控制策略研究[J]. 中国机械工程, 2018, 29(23): 2821-2828.
[14]	张细政, 郑亮. [分布式驱动电动汽车动力学控制]基于转矩协调分配的分布式驱动电动汽车稳定性控制[J]. 中国机械工程, 2018, 29(15): 1780-1787.
[15]	高锋, 王晓彤. [电动汽车稳定性控制]异质队列的分布式鲁棒解耦控制[J]. 中国机械工程, 2018, 29(15): 1802-1807.