超大型环件径轴向轧制过程稳定性与圆度自适应控制方法研究

doi:10.3969/j.issn.1004-132X.2022.11.012

中国机械工程 ›› 2022, Vol. 33 ›› Issue (11): 1353-1360.DOI: 10.3969/j.issn.1004-132X.2022.11.012

超大型环件径轴向轧制过程稳定性与圆度自适应控制方法研究

宁湘锦1，2，3;汪小凯1，2，3;华林1，2，3;韩星会1，2，3;张科1，2，3

1.武汉理工大学现代汽车零部件技术湖北省重点实验室，武汉，430070
2.武汉理工大学汽车零部件技术湖北省协同创新中心，武汉，430070
3.武汉理工大学材料绿色精密成形技术与装备湖北省工程中心，武汉，430070

出版日期:2022-06-10 发布日期:2022-07-01
通讯作者: 汪小凯（通信作者），男，1982年生，教授、博士研究生导师。研究方向为运载装备智能化控制。E-mail:wxk0919@163.com。
作者简介:宁湘锦，男，1997年生，硕士研究生。研究方向为环件塑性成形及控制。E-mail:541128080@qq.com。
基金资助:
国家重点研发计划（2019YFB1704502）；国家自然科学基金（U2037204,52175362）；湖北省杰出青年基金（2019CFA041）

Research on Stability and Roundness Adaptive Control Method of Radial and Axial Ring Rolling Processes of Super Large Rings

NING Xiangjin1,2,3;WANG Xiaokai1,2,3;HUA Lin1,2,3;HAN Xinghui1,2,3;ZHANG Ke1,2,3

1.Hubei Key Laboratory of Advanced Technology of Automobile Parts,Wuhan University of Technology,Wuhan,430070
2.Hubei Collaborative Innovation Center of Automotive Components Technology,Wuhan University of Technology,Wuhan,430070
3.Hubei Engineering Center of Material Green Precision Forming Technology and Equipment,Wuhan University of Technology,Wuhan,430070

Online:2022-06-10 Published:2022-07-01

摘要/Abstract

摘要： 超大型环件径轴向轧制过程失稳、失圆等异常状态常导致轧环终止和产品质量波动。提出了轧环过程稳定性和圆度自适应控制方法，从历史数据中归纳人工控制经验知识，建立了基于锥辊转速模糊调节的轧制稳定性控制方法，制定了基于导向力反馈的轧制圆度控制策略。运用ABAQUS有限元软件和子程序二次开发，设计了轧环过程稳定性和圆度自适应控制子程序，建立了16 m超大型环件轧制过程控制有限元模型，仿真分析了锥辊转速模糊调节、导向力反馈以及基于限幅滤波的锥辊转速模糊调节+导向力反馈综合控制下的轧环过程偏移量和圆度误差变化规律，结果表明该方法与常规规划控制相比，环件偏移量减小了48.3%，圆度误差减小了61.8%。

关键词: 超大型环件, 径轴向轧制, 稳定性, 圆度, 智能控制

Abstract: In the radial and axial rolling processes of super large rings, such abnormal conditions as instability and loss of roundness often led to rolling termination and quality fluctuation. An adaptive control method of stability and roundness of ring rolling processes was proposed, and the experience of manual control was summarized from historical data. The stability control method of ring rolling was established based on fuzzy adjustment of cone roll revolution speed, and the roundness control strategy of ring rolling was developed based on the guide force feedback. Using ABAQUS software and subroutines, the adaptive control subroutines of ring rolling processes were designed, and finite element models of adaptive control of 16 m super large ring rolling processes were established. The rings offset and roundness error change rules were analyzed during ring rolling processes in different methods of cone roller revolution speed fuzzy adjustment, guide force feedback and cone roller revolution speed fuzzy adjusting integrated guidance force feedback comprehensive control. The results show that, with regard to the control method, the rings offset is reduced by 48.3% and the roundness errors are reduced by 61.8% compared with the conventional control methods.

Key words: super large ring, radial and axial ring rolling, stability, roundness, intelligent control

中图分类号:

TP182
DOI：10.3969/j.iss

宁湘锦, 汪小凯, 华林, 韩星会, 张科, . 超大型环件径轴向轧制过程稳定性与圆度自适应控制方法研究[J]. 中国机械工程, 2022, 33(11): 1353-1360.

NING Xiangjin, WANG Xiaokai, HUA Lin, HAN Xinghui, ZHANG Ke, . Research on Stability and Roundness Adaptive Control Method of Radial and Axial Ring Rolling Processes of Super Large Rings[J]. China Mechanical Engineering, 2022, 33(11): 1353-1360.

参考文献

［1］华林, 钱东升. 轴承环轧制成形理论和技术［J］. 机械工程学报, 2014, 50(16):70-76.
HUA Lin, QIAN Dongsheng. Bearing Ring Rolling Forming Theory and Technology［J］. Journal of Mechanical Engineering, 2014, 50(16):70-76.
［2］胡正寰，华林. 零件轧制成形技术［M］. 北京：化学工业出版社, 2010.
HU Zhenghuan, HUA Lin. Rolling Technology of Parts［M］. Beijing：Chemical Industry Press, 2010.
［3］ZHOU G, HUA L, QIAN D, et al. Effects of Axial Rolls Motions on Radia-axial Rolling Process for Large-scale Alloy Steel Ring with 3D Coupled Thermo-mechanical FEA［J］. International Journal of Mechanical Sciences, 2012, 59:1-7.
［4］CLEAVER C, ALLWOOD J M. Curvature Development in Ring Rolling［J］. Journal of Materials Processing Technology, 2019, 267:316-337.
［5］HENKE T, HIRT G, BAMBACH M. Application of a Material Model to Predict Rolling Forces and Microstructure during a Hot Ring Rolling Process［J］. Materials Science Forum, 2013, 762:354-359.
［6］徐坤和, 张文学, 阳代军, 等. 9 m级超大直径2219铝合金整体环件的研制［J］. 锻压技术, 2016, 41(10):92-97.
XU Kunhe, ZHANG Wenxue, YANG Daijun, et al. Development of 9 m Grade Super Large Diameter 2219 Aluminum Alloy Integral Ring［J］. Forging Technology, 2016, 41(10):92-97.
［7］LIANG L, GUO L, WANG Y, et al. Towards an Intelligent FE Simulation for Real-time Temperature-controlled Radial-axial Ring Rolling Process［J］. Journal of Manufacturing Processes, 2019, 48:1-11.
［8］QIAN D, PAN Y. 3D Coupled Macro-microscopic Finite Element Modelling and Simulation for Combined Blank-forging and Rolling Process of Alloy Steel Large Ring［J］. Computational Materials Science, 2013, 70:24-36.
［9］ALLWOOD J, DUNCAN S, CAO J, et al. Closed-loop Control of Product Properties in Metal Forming［J］. CIRP Annals:Manufacturing Technology, 2016, 65:573-596.
［10］LIEH J, LI W. On-line Fuzzy Logic Control of Tube Bending［J］. Proceedings of SPIE：the International Society for Optical Engineering, 2005, 5999：130-141.
［11］MANABE K. Advanced In-process Control System for Sheet Stamping and Tube Hydroforming Processes［J］. Key Engineering Materials, 2014, 622/623:3-14.
［12］JENKOUK V, HIRT G, FRANZKE M, et al. Finite Element Analysis of the Ring Rolling Process with Integrated Closed-loop Control［J］. CIRP Annals：Manufacturing Technology, 2012, 61:267-270.
［13］HUA L, PAN L B, LAN J. Researches on the Ring Stiffness Condition in Radial-axial Ring Rolling［J］. Journal of Materials Processing Technology, 2009, 209:2570-2575.
［14］郭良刚, 邸伟佳, 杨合, 等. 难变形材料环件双向辗轧过程轧制曲线设计方法［J］. 机械工程学报, 2014, 50(16):83-88.
GUO Lianggang, DI Weijia, YANG He, et al. Design Method of Rolling Curve in Two-way Rolling Process of Ring for Difficult to Deform Materials ［J］. Journal of Mechanical Engineering, 2014, 50 (16):83-88
［15］LIANG L, GUO L, LI X C, et al. Intelligent Simulation for Real-timely Force-controlled Radial-axial Rolling Process of Supersized Aluminium Alloy Rings［J］. Procedia Manufacturing, 2018, 15:105-112.

[1]	赵伟, 王志远, 周志立. 载重汽车连续下坡弯道路段制动稳定性仿真研究 [J]. J4, 201016, 21(16): 2010-2015.
[2]	宋慈, 焦黎, 王西彬, 刘志兵, 陈晖. 面向轴孔类零件圆度误差评定的改进式最小区域圆法[J]. 中国机械工程, 2022, 33(09): 1090-1097,1114.
[3]	杨潇, 曾令万, 陈鹏, 杜彦斌, 李博. 干切滚齿机床热流复杂特性及多维调控策略[J]. 中国机械工程, 2022, 33(05): 623-629.
[4]	王轶禹, 赵建社, 谷民凯, 纪涛. 渐开线内花键电解加工流场设计及工艺稳定性研究[J]. 中国机械工程, 2021, 32(13): 1562-1570.
[5]	郭磊, 刘检华, 张佳朋, 李夏禹, 张秀敏, 夏焕雄. 航天工业中胶接技术的研究现状分析[J]. 中国机械工程, 2021, 32(12): 1395-1405.
[6]	刘勇, 周一帆, 许铠通, 姜伟. 车辆动力装置变刚度隔振新方法[J]. 中国机械工程, 2021, 32(06): 741-747,755.
[7]	郑鑫;赵又群;王秋伟;张陈曦. 匹配机械弹性车轮的电子稳定控制器参数分析[J]. 中国机械工程, 2020, 31(23): 2883-2890.
[8]	张宁;李田;殷国栋;吴建华;赵子乾. 转向系参数对汽车拖车组合系统稳定性的影响[J]. 中国机械工程, 2020, 31(21): 2521-2528.
[9]	谢冬福1;罗玉峰1,2;石志新1;刘燕德2. 多移动机器人协同模式及其倾翻稳定性研究[J]. 中国机械工程, 2020, 31(20): 2472-2485.
[10]	陈月, 邱明, 杜辉, 杨旭. 机器人用四点接触球轴承旋转精度影响因素[J]. 中国机械工程, 2020, 31(14): 1678-1685,1692.
[11]	李舒雅1;谷正气1,2;黄泰明3;刘俊1;郑乐典1. 不同侧风工况下汽车稳定性双向耦合研究[J]. 中国机械工程, 2019, 30(19): 2276-2286.
[12]	李海青；赵又群. 机械弹性车轮结构参数对汽车侧翻稳定性的影响[J]. 中国机械工程, 2019, 30(13): 1519-1527.
[13]	汪选要1,2,3;程义1;程煜1;叶友东1,2. 低附着系数路面车道保持模型预测控制及汽车稳定性控制[J]. 中国机械工程, 2019, 30(09): 1018-1025.
[14]	程熊豪1,2;石端伟1,2;李红享1;夏热2;张阳1;周吉1. 高扬程全平衡卷扬式垂直升船机系统稳定性分析[J]. 中国机械工程, 2019, 30(08): 919-925.
[15]	张磊1,2;冷杰武1,2;龚粤1,2. 悬臂式货架立体仓货位智能优化[J]. 中国机械工程, 2019, 30(04): 467-471,479.

超大型环件径轴向轧制过程稳定性与圆度自适应控制方法研究

Research on Stability and Roundness Adaptive Control Method of Radial and Axial Ring Rolling Processes of Super Large Rings

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics