China Mechanical Engineering ›› 2025, Vol. 36 ›› Issue (12): 2894-2902.DOI: 10.3969/j.issn.1004-132X.2025.12.011
Boyu FU(
), Zehua XU, Kangshuai LI, Haoyu WANG, Jiaqi HE, Qiang HE(
)
Received:2025-01-04
Online:2025-12-25
Published:2025-12-31
Contact:
Qiang HE
付博宇(
), 许泽华, 李康帅, 王浩宇, 贺嘉琪, 何强(
)
通讯作者:
何强
作者简介:付博宇,男,1999年生,硕士研究生。研究方向为永磁同步电机风冷散热。E-mail:820947701@qq.com。
基金资助:CLC Number:
Boyu FU, Zehua XU, Kangshuai LI, Haoyu WANG, Jiaqi HE, Qiang HE. Numerical Simulation and Experimental Analysis of Propeller Flow Fields and Motor Temperature Fields in High-altitude Environments for UAVs[J]. China Mechanical Engineering, 2025, 36(12): 2894-2902.
付博宇, 许泽华, 李康帅, 王浩宇, 贺嘉琪, 何强. 高海拔环境下无人机螺旋桨流场与电机温度场的数值模拟与试验分析[J]. 中国机械工程, 2025, 36(12): 2894-2902.
Add to citation manager EndNote|Ris|BibTeX
URL: https://www.cmemo.org.cn/EN/10.3969/j.issn.1004-132X.2025.12.011
| 参数名称 | 数值 |
|---|---|
| 额定功率/W | 273 |
| 额定电压/V | 14.5 |
| 额定转速/(r·min | 10 000 |
| 极数2p | 12 |
| 槽数 | 14 |
| 定子外径/mm | 21.5 |
| 定子内径/mm | 10 |
| 转子外径/mm | 27.5 |
| 转子内径/mm | 22 |
| 气隙长度/mm | 0.25 |
Tab.1 Basic motor parameters
| 参数名称 | 数值 |
|---|---|
| 额定功率/W | 273 |
| 额定电压/V | 14.5 |
| 额定转速/(r·min | 10 000 |
| 极数2p | 12 |
| 槽数 | 14 |
| 定子外径/mm | 21.5 |
| 定子内径/mm | 10 |
| 转子外径/mm | 27.5 |
| 转子内径/mm | 22 |
| 气隙长度/mm | 0.25 |
电机转速n/ (r·min | 电流/A | 铜损/W | 铁损/W | 涡流 损耗/W | 附加 损耗/W |
|---|---|---|---|---|---|
| 4000 | 0.523 | 0.0293 | 0.4805 | 0.0095 | 0.0009 |
| 6000 | 1.627 | 0.2216 | 0.9295 | 0.0215 | 0.0017 |
| 8000 | 3.670 | 1.1271 | 1.5189 | 0.0393 | 0.0036 |
Tab.2 Loss values at different speeds for four types of losses
电机转速n/ (r·min | 电流/A | 铜损/W | 铁损/W | 涡流 损耗/W | 附加 损耗/W |
|---|---|---|---|---|---|
| 4000 | 0.523 | 0.0293 | 0.4805 | 0.0095 | 0.0009 |
| 6000 | 1.627 | 0.2216 | 0.9295 | 0.0215 | 0.0017 |
| 8000 | 3.670 | 1.1271 | 1.5189 | 0.0393 | 0.0036 |
| 元件 | 材料 | 热导率/ (W·m | 质量热容/ (J·kg | 密度/ (kg·m |
|---|---|---|---|---|
| 绕组 | 铜 | 401 | 385 | 8933 |
定子 铁芯 | M530-65A | 30 | 460 | 7650 |
转子 铁芯 | M530-65A | 30 | 460 | 7650 |
| 永磁体 | N42UH | 7.6 | 460 | 7500 |
| 机壳 | 铝 | 168 | 833 | 2790 |
Tab.3 Materials and properties of electric motor components
| 元件 | 材料 | 热导率/ (W·m | 质量热容/ (J·kg | 密度/ (kg·m |
|---|---|---|---|---|
| 绕组 | 铜 | 401 | 385 | 8933 |
定子 铁芯 | M530-65A | 30 | 460 | 7650 |
转子 铁芯 | M530-65A | 30 | 460 | 7650 |
| 永磁体 | N42UH | 7.6 | 460 | 7500 |
| 机壳 | 铝 | 168 | 833 | 2790 |
| 地点 | 海拔高度/m | 气压/Pa | 空气密度/ (kg·m | 温度/℃ |
|---|---|---|---|---|
| 四川省广汉市 | 510 | 99 346.9 | 1.6614 | 18.7 |
| 四川省康定市 | 2560 | 74 130.8 | 0.95113 | 10.4 |
| 康定市康定机场 | 4280 | 60 446.5 | 0.79544 | -1.2 |
Tab.4 Environmental parameters at three different altitude locations
| 地点 | 海拔高度/m | 气压/Pa | 空气密度/ (kg·m | 温度/℃ |
|---|---|---|---|---|
| 四川省广汉市 | 510 | 99 346.9 | 1.6614 | 18.7 |
| 四川省康定市 | 2560 | 74 130.8 | 0.95113 | 10.4 |
| 康定市康定机场 | 4280 | 60 446.5 | 0.79544 | -1.2 |
| 测量项 | 范围 | 精度 |
|---|---|---|
| 电压/V | 0 ~30 | 0.05% + 0.05% FS |
| 电流/A | 0 ~20 | 0.1% + 0.1% FS |
| 转速/(r·min | 30~12,000 | 0.05% + 0.05% FS |
| 电机温度/℃ | ±0.5 | |
| 环境温度/℃ | ±0.5 | |
| 气压/kPa | 50~120 | ±0.4 |
Tab.5 LY-3KGF power system testing parameters
| 测量项 | 范围 | 精度 |
|---|---|---|
| 电压/V | 0 ~30 | 0.05% + 0.05% FS |
| 电流/A | 0 ~20 | 0.1% + 0.1% FS |
| 转速/(r·min | 30~12,000 | 0.05% + 0.05% FS |
| 电机温度/℃ | ±0.5 | |
| 环境温度/℃ | ±0.5 | |
| 气压/kPa | 50~120 | ±0.4 |
| [1] | NVSS S, ESAKKI B, YANG L J, et al. Design and Development of Unibody Quadcopter Structure Using Optimization and Additive Manufacturing Techniques[J]. Designs, 2022, 6(1): 8. |
| [2] | HAMURCU M, EREN T. Selection of Unmanned Aerial Vehicles by Using Multicriteria Decision-Making for Defence[J]. Journal of Mathematics, 2020, 2020(1): 4308756. |
| [3] | SUTI A, DI Rito G, GALATOLO R. Fault-tolerant Control of a Dual-stator PMSM for the Full-electric Propulsion of a Lightweight Fixed-wing UAV[J]. Aerospace, 2022, 9(7): 337. |
| [4] | AHN J M, SON J C, LIM D K. Optimal Design of Outer-rotor Surface Mounted Permanent Magnet Synchronous Motor for Cogging Torque Reduction Using Territory Particle Swarm Optimization[J]. Journal of Electrical Engineering & Technology, 2021, 16(1): 429-436. |
| [5] | KIM J W, YUN C, OH T H, et al. Optimal Design of SPMSM for UAV Using Adjusted Evolution Strategy[J]. IEEE Access, 2024, 12: 94496-94505. |
| [6] | JUNG W S, LEE H K, LEE Y K, et al. Analysis and Comparison of Permanent Magnet Synchronous Motors according to Rotor Type under the Same Design Specifications[J]. Energies, 2023, 16(3): 1306. |
| [7] | 刘蕾, 刘光复, 刘马林, 等. 车用永磁同步电机三维温度场分析[J]. 中国机械工程, 2015, 26(11): 1438-1444. |
| LIU Lei, LIU Guangfu, LIU Malin, et al. Analysis on Three-dimensional Temperature Field of Permanent Magnet Synchronous Motor in Vehicles[J]. China Mechanical Engineering, 2015, 26(11): 1438-1444. | |
| [8] | GUO H, DING Q, SONG Y, et al. Predicting Temperature of Permanent Magnet Synchronous Motor Based on Deep Neural Network[J]. Energies, 2020, 13(18): 4782. |
| [9] | FENG J, LIANG D, ZHU Z Q, et al. Improved Low-order Thermal Model for Critical Temperature Estimation of PMSM[J]. IEEE Transactions on Energy Conversion, 2021, 37(1): 413-423.1 |
| [10] | 汤勇, 孙亚隆, 郭志军, 等. 电机散热系统的研究现状与发展趋势[J]. 中国机械工程, 2021, 32(10): 1135-1150. |
| TANG Yong, SUN Yalong, GUO Zhijun, et al. Development Status and Perspective Trend of Motor Cooling Systems[J]. China Mechanical Engineering, 2021, 32(10): 1135-1150. | |
| [11] | CHEN Z, YU Z, FU J, et al. Analysis and Design of Air-heat Pipe Composite Cooling of High Power Density Motor[J]. Applied Thermal Engineering, 2024, 236: 121495. |
| [12] | QIN T, ZHANG G, YANG L, et al. Research on the Endurance Optimisation of Multirotor UAVs for High-altitude Environments[J]. Drones, 2023, 7(7): 469. |
| [13] | ETEWA M, HASSAN A F, SAFWAT E, et al. Performance Estimation of Fixed-wing UAV Propulsion Systems[J]. Drones, 2024, 8(9): 424. |
| [14] | YABG X, MA D, ZHANG L, et al. High-fidelity Multi-level Efficiency Optimization of Propeller for High-Altitude Long-endurance UAV[J]. Aerospace Science and Technology, 2023, 133: 108142. |
| [15] | PAREDES J A, SAITO C, ABARCA M, et al. Study of Effects of High-altitude Environments on Multicopter and Fixed-wing UAVs' Energy Consumption and Flight Time[C]∥2017 13th IEEE Conference on Automation Science and Engineering (CASE). Xi'an, 2017: 1645-1650. |
| [16] | SCANAVINO M, AVI A, VILARDI A, et al. Unmanned Aircraft Systems Performance in a Climate-Controlled Laboratory[J]. Journal of Intelligent & Robotic Systems, 2021, 102(1): 24. |
| [17] | PIANCASTELLI L. An Innovative Heat Rejection System for High-altitude Unmanned Aerial Vehicles[J]. Power Engineering and Engineering Thermophysics, 2023, 2(2): 110-119. |
| [18] | WANG S, LV Z, ZHAO Y, et al. Temperature Field and Heat Load Research for Main Propellant Direct Drive Permanent Magnet Motor of Unmanned Aerial Vehicle[C]∥2014 17th International Conference on Electrical Machines and Systems (ICEMS). Hangzhou, 2014: 2360-2364. |
| [19] | LIBEN M, LUDOIS D C. Analytical Design and Experimental Testing of a Self-cooled, Toroidally Wound Ring Motor with Integrated Propeller for Electric Rotorcraft[J]. IEEE Transactions on Industry Applications, 2021, 57(3): 2342-2353. |
| [20] | CHANG M, LAI B, WANG H, et al. Comprehensive Efficiency Analysis of Air-cooled vs Water-cooled Electric Motor for Unmanned Aerial Vehicle[J]. Applied Thermal Engineering, 2023, 225: 120226. |
| [1] |
TUN Fu-Chao, TUN Bai-Hu, ZHANG Xiu-Hua.
Numerical Simulation of Heat Transfer Performance of Paraffin Thermal-Sensitive Valve
[J]. J4, 201016, 21(16): 1921-1926.
|
| [2] | ZHANG Peng1, 3, 4, 5, ZHU Xuewei2, 3, 4, YU Baoyang1, 3, 4, WU Tianfeng1, 3, 4, ZHU Jinzhou1, 3, 4. Flow Behavior and Microstructure of 304 Stainless Steel Ultra-thin Strips in Microchannel Gas Forming [J]. China Mechanical Engineering, 2025, 36(07): 1416-1422. |
| [3] | FAN Zhisong, LI Ning, XU Likai, DENG Jianghua. Research on Magnetic Pulse Expansion Joining of 6063 Aluminum/Steel 20 Tubes [J]. China Mechanical Engineering, 2024, 35(12): 2185-2192. |
| [4] | LI Yanle, PAN Zhongtao, QI Xiaoxia, CUI Weiqiang, CHEN Jian, LI Fangyi. Effect of Heat Treatment on Temperature and Stress Distribution during Laser Cladding of 316L Steels [J]. China Mechanical Engineering, 2024, 35(04): 666-677. |
| [5] | PENG Wenfei, ZHANG Cheng, LIN Longfei, HUANG Minghui, YU Feng. Modeling and Prediction of Central Damages in Cross Wedge Rolling Based on Continuous Damage Mechanics [J]. China Mechanical Engineering, 2024, 35(04): 711-720,751. |
| [6] | LI Kunhang, ZHANG Siqi, WU Wei, HU Mingzhuo, SUN Yaling, XIONG Xin, HUANG Hong. Multi-field Coupling Simulation and Analysis for Resistance Spot Welding of Three-layer Dissimilar Unequal-thickness Steels [J]. China Mechanical Engineering, 2023, 34(24): 2996-3003. |
| [7] | LUO Wenze, CHENG Huimei, LIU Hongyan, WANG Yifeng, YE Yanhong, DENG Dean. Numerical Simulation of Residual Stress and Welding Deformation for High Strength Steel Q960E Butt-welded Joints [J]. China Mechanical Engineering, 2023, 34(17): 2095-2105,2141. |
| [8] | XU Xiang, ZHANG Yilun, MEI Zheng, LI Jian, WANG Dan, MU Liansong. Numerical Simulation and Experimental Investigation of Flow Fields in Vehicle Climatic Chambers [J]. China Mechanical Engineering, 2023, 34(17): 2115-2123. |
| [9] | ZHU Yulong, ZHAO Yingsong, FANG Yang, CHEN Hongen, CHEN Zhenmao, . Rotating Eddy Current Testing for Inspection of Cracks at Hole Edge [J]. China Mechanical Engineering, 2023, 34(08): 883-891. |
| [10] | QIN Deng, DAI Zhiyuan, ZHOU Ning, LI Tian. Effects of Pantograph Subsidence on Its Aerodynamic and Acoustic Behaviors [J]. China Mechanical Engineering, 2022, 33(20): 2509-2519. |
| [11] | LI Wei, ZHENG Hao, LIU Yanmei, FAN Song. Numerical Simulation on Mounted Bolt Failures in Vehicle Subframe [J]. China Mechanical Engineering, 2022, 33(19): 2388-2393. |
| [12] | HU Futai, . Cracking Suppression and Lateral Bending Broadening Strategy of Fan-shaped Thin-wall Ribs during Extrusion [J]. China Mechanical Engineering, 2022, 33(14): 1734-1740. |
| [13] | MA Yi, CHEN Yutao, MENG Xiangkai, ZHAO Wenjing, PENG Xudong, . Transient Start-up Dynamics Model and Sealing Performance of Single Metal Seals in Cone Bits [J]. China Mechanical Engineering, 2022, 33(07): 777-785. |
| [14] | XU Mingsan, ZHOU Chunhui, ZHANG Zheng, ZENG Shoujin, . Temperature Distribution of Powder-gas-optical Coupling temperature field in Laser Cladding Processes [J]. China Mechanical Engineering, 2022, 33(01): 70-77. |
| [15] | PAN Chengyi, TONG Yuanqi, CAO Guanqun, ZHAO Yanling. Research on Friction and Wear Characteristics and Simulation of Microstructures Surface Unfolding Wheels [J]. China Mechanical Engineering, 2021, 32(22): 2689-2696. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||