基于拓扑优化方法的大型液压挖掘机斗杆新型结构

摘要/Abstract

摘要： 以斗杆结构强度为基准，采用结构优化的方法，设计了大型液压挖掘机正铲工作装置斗杆新结构。采用离散元方法，构建矿山岩石模型，获得铲斗挖掘阻力；采用多体动力学方法，搭建大型液压挖掘机正铲工作装置刚柔耦合动力学模型，获得挖掘机斗杆挖掘工况斗杆动态载荷，并对斗杆进行动态结构强度分析；采用SIMP插值函数的变密度拓扑优化方法，在有限元中对斗杆结构进行拓扑优化设计，获得大型液压挖掘机正铲工作装置新型斗杆结构；对新型斗杆结构进行动态结构强度分析，斗杆结构强度保持原有水平。研究结果表明，通过拓扑优化后得到的新型斗杆，结构强度与类比设计一致，但质量减小。

关键词: 有限元, 拓扑优化, 变密度法, 挖掘机

Abstract: Based on the structural strengths of the sticks, a new stick structure of the working devices of large shovel hydraulic excavators was designed by the method of structure optimization. Mine rock model was build by using the discrete element method, and the digging resistances of the bucket were obtained. The rigid-flexible coupling model of the working devices of the large shovel hydraulic excavators was established by using the multi-body dynamics method, the dynamic loads of the sticks during the stick digging were obtained, and the dynamic structural strengths of the sticks were analyzed. The topology optimization design of the stick structures in finite element was carried out by using the variable density topology optimization method of SIMP interpolating function, and the new stick structures of the working devices of large shovel hydraulic excavators were obtained. The dynamic structure strengths of the new stick structures were analyzed, the strengths of the new stick structures maintained the original level. The results indicate that the new stick structure has the same strength as the analogy designed, while the weights of the sticks are reduced.

Key words: finite element, topology optimization, variable density method, excavator

中图分类号:

TH122

宁晓斌1;刘亚冉1;李颉2;李光3;李佳林3. 基于拓扑优化方法的大型液压挖掘机斗杆新型结构[J]. 中国机械工程.

NING Xiaobin1;LIU Yaran1;LI Jie2;LI Guang3;LI Jialin3. New Stick Structures of Large Hydraulic Excavators Using Topology Optimization Method[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2017/V28/I16/1936

参考文献

[1]KIMS Y. A Development of the Virtual Design System for the Attachments of a Hydraulic Excavator[J]. SAE International Journal of Commercial Vehicles, 2012, 5(1):327-332.
[2]PARKS C. Design of Excavator Boom Structure Based on Fatigue Strength of Weldment(II)[J]. Journal of the Korea Society for Power System Engineering, 2011, 29(4)：61-66.
[3]ZGENC. Shape Optimization of an Excavator Boom by Using Genetic Algorithm[D]. Ankara:Middle East Technical University，2008.
[4]WU S B， LIU X B. Layout Topology Optimization for Inner Stiffeners of Excavator's Boom[J]. Advanced Materials Research，2014(915/916)：240-243.
[5]邓志勇，熊昌炯，洪昊，等. 变密度法在挖掘机动臂轻量化设计中的分析与应用[J]. 三明学院学报，2016，33 (2)：66-73.
DENG Zhiyong，XIONG Changjiong, HONG Hao，et al. Analysis and Application on Variable Density Method in the Process of the Excavator Boom Lightweight Design[J]. Journal of Sanming University，2016，33 (2)：66-73.
[6]周全. 正铲液压挖掘机工作装置动态强度分析与结构优化[D]. 杭州：浙江工业大学，2015.
ZHOU Quan. Research on Dynamic Strength and Structure Optimization of Face-shovel Hydraulic Excavator Attachment[D]. Hangzhou：Zhejiang Universityof Technology，2015.
[7]朱小晶，权龙，王新中，等. 大型液压挖掘机工作特性联合仿真研究[J]. 农业机械学报，2011，42（4）：27-32.
ZHU Xiaojing，QUAN Long，WANG Xinzhong，et al. Co-simulation Analysis of Working Characteristic for Large Hydraulic Excavator[J]. Transactions of the Chinese Society for Agricultural Machinery，2011，42（4）：27-32.
[8]朱小晶，权龙，王新中，等. 大型矿用正铲液压挖掘机水平推压特性联合仿真[J]. 农业机械学报，2011，42（5）：30-34.
ZHU Xiaojing，QUAN Long，WANG Xinzhong，et al. Co-simulation of Flat-pushing Characteristics of Large Mining Face-shovel Hydraulic Excavator[J]. Transactions of the Chinese Society for Agricultural Machinery，2011，42（5）：30-34.
[9]张羽林，宁晓斌，王秋成. 大型正铲液压挖掘机工作装置性能的优化仿真[J]. 机电工程，2013，30(3)：329-332.
ZHANG Yulin，NING Xiaobin，WANG Qiucheng. Optimization Simulation for Performance of Working Device of Large Face-shovel Hydraulic Excavator[J]. Journal of Mechanical & Electrical Engineering，2013，30(3)：329-332.
[10]陈露丰, 宁晓斌. 液压挖掘机工作装置的动态强度仿真分析[J]. 机电工程，2013，30(8)：924-928.
CHEN Lufeng，NING Xiaobin. Simulation and Analysisof Dynamic Strength of Working Mechanism of Hydraulic Excavator[J]. Journal of Mechanical & Electrical Engineering，2013，30(8)：924-928.
[11]THOMAS H，SCLLRAMM U. Issues of Commercial Optimization Software Development[J]. Structural and Multidisciplinary Optimization，2002，23(2)：97-110.
[12]BENDSE M P. Optimal Shape Design as a Material Distribution Problem[J]. Structural and Multidisciplinary Optimization，1989，1(4)：193-202.
[13]THORNTON C，CUMMINS S J，CLEARY P W. An Investigation of the Comparative Behaviour of Alternative Contact Force Models during Inelastic Collisions[J]. Powder Technology，2013，233：30-46.
[14]HHNER D，WIRTZ S，KRUGGEL-EMDEN H，et al. Comparison of the Multi-sphere and Polyhedral Approach to Simulate Non-spherical Particles within the Discrete Element Method：Influence on Temporal Force Evolution for Multiple Contacts[J]. Powder Technology，2011，208:643-656.
[15]陈烨，李爱峰，李光，等. 大型液压挖掘机斗杆挖掘阻力的离散元方法研究[J]. 机电工程，2015，32(6)：798-802.
CHEN Ye，LI Aifeng，LI Guang，et al. DEM Research for Crowd Force of Large Hydraulic Excavator[J]. Journal of Mechanical & Electrical Engineering，2015，32(6)： 798-802.
[16]BENDSE M P，KIKUCHI N. Generating Optimal Topologies in Structural Design Using a Homogenization Method[J]. Computer Methods in Applied Mechanics and Engineering，1988，71：197-224.
[17]SUZHKI K，KIKUCHI N. A Homogenization Method for Shape and Topology Optimization[J]. Computer Methods in Applied Mechanics and Engineering，1991，4：17-22.
[18]XIE Y M，STEVEN G P. A Simple Evolutionary Procedure for Structural Optimization[J]. Computer&Structures，1993，49(5)：885-896.