大型回转件自动超声波探伤轨迹规划及仿真分析

中国机械工程 ›› 2014, Vol. 25 ›› Issue (19): 2557-2562.

大型回转件自动超声波探伤轨迹规划及仿真分析

曾达幸1;沈二强1;侯雨雷1;邱雪松1;刘佳启2;姚建涛1;赵永生1;周玉林1

1.燕山大学,秦皇岛,066004
2.中国第一重型机械股份公司,齐齐哈尔,161042

出版日期:2014-10-10 发布日期:2014-10-14
基金资助:
国家自然科学基金资助项目（51005195，51275443）

Trajectory Planning and Simulation Analysis of Automatic Ultrasonic Testing for Large Rotary Parts

Zeng Daxing1;Shen Erqiang1;Hou Yulei1;Qiu Xuesong1;Liu Jiaqi2;Yao Jiantao1;Zhao Yongsheng1;Zhou Yulin1

1.Yanshan University, Qinhuangdao,Hebei,066004
2.China First Heavy Industries,Qiqihaer,Heilongjiang,161042

Online:2014-10-10 Published:2014-10-14
Supported by:
National Natural Science Foundation of China（No. 51005195，51275443）

摘要/Abstract

摘要：

针对目前大型回转件主要依靠传统手工探伤的种种缺陷,开展了自动化超声波探伤的轨迹规划与探伤系统运动规律的研究,并进行探头扫查轨迹运动仿真。阐述了自动化探伤模拟手工探伤的工艺原理,分析了工件、探头的运动规律,规划了探头扫查轨迹,整个自动化探伤工艺符合无损探伤国家标准,并将探伤效率提高了5.46倍;联合MATLAB和ADAMS软件对探头扫查轨迹进行仿真,仿真结果验证了轨迹规划的正确性。

关键词: 大型回转件, 自动化超声波探伤, 轨迹规划, 运动仿真

Abstract:

Based on the investigation of the existing problems in traditional manually ultrasonic testing of large rotary parts, trajectory planning and movement law of testing system were researched herein, then the motion simulation of probe inspection trajectory was carried out.This paper discussed the principles of manually testing simulated by automatic testing, set the motion law of the axles and the probe, then planned the probe inspection trajectory. All of the automatic testing process was in line with the standards of non-destructive testing and the efficiency of testing was improved 5.46 times; Based on MATLAB and ADAMS software, the probe inspection trajectory was simulated, and the planning trajectory was realized. The research and results of the simulation demonstrate the feasibility of the automatic testing take the place of manually testing, and possesses theoretical direction significance for the similar trajectory planning in future.

Key words: large rotary part, automatic ultrasonic testing, trajectory planning, motion simulation

中图分类号:

TP23
TP273

曾达幸, 沈二强, 侯雨雷, 邱雪松, 刘佳启, 姚建涛, 赵永生, 周玉林 . 大型回转件自动超声波探伤轨迹规划及仿真分析[J]. 中国机械工程, 2014, 25(19): 2557-2562.

Zeng Daxing, Shen Erqiang, Hou Yulei, Qiu Xuesong, Liu Jiaqi, Yao Jiantao, Zhao . Trajectory Planning and Simulation Analysis of Automatic Ultrasonic Testing for Large Rotary Parts[J]. China Mechanical Engineering, 2014, 25(19): 2557-2562.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2014/V25/I19/2557

参考文献

[1]常少文，杨彤. 钢管超声波自动探伤控制装置的研制与应用[J]. 焊管，2012，35(9)：51-56.
Chang Shaowen, Yang Tong. Development and Application of Ultrasonic Automatic Flaw Detection Control Device for Steel Pipe[J]. Welded Pipe and Tube, 2012，35(9)：51-56.
[2]Stubbs D, Fiscus I, Gasper D, et al. An Automated Ultrasonic System for Inspection of Aircraft Turbine Engine Components[J]. Insight, 2005, 47(3)：157-162.
[3]Rutten J. MuRi Aix Automated Ultrasonic Inspection Systems for New AIRBUS A380 Composite Glare Panels[C]//Proceedings of Aerospace Testing. Hamburg，2004:1-7.
[4]Haase W, Maurer A. Latest Developments on Industrial Ultrasonic Testing of Aircraft Components[C]//Proceedings of the World Conference on Non-Destructive Testing. Montreal，2004:1-7.
[5]Vesth L, Hansen P B, Kristensen W D.Robot System for Ultrasonic Examination of Complex Geometries[J]. NDT.net，1998, 3(7):26-29.
[6]吴秋轩，曹广益，刘呈则，等. 基于超声波串列扫查的自动扫查装置控制系统研究[J]. 中国机械工程，2005,16(3)：227-229.
Wu Qiuxuan, Cao Guangyi, Liu Chenze, et al. Research on Automatic Scan Device Control System Based on Tandem Scanning of Ultrasonic[J]. China Mechanical Engineering, 2005,16(3)：227-229.
[7]石增强，程洪杰，谢建，等. 大型圆筒件超声检测系统的设计[J].无损检测，2005,27(9)：475-478.
Shi Zengqiang, Cheng Hongjie, Xie Jian, et al. Design of Ultrasonic Testing System for Large Scale Columnar Device[J]. Nondestructive Testing, 2005, 27(9): 475-478.
[8]邓燕妮，朱小进，刘涛．基于OMAP5910的超声检测系统[J]. 仪表技术与传感器，2006(8)：37-38.
Deng Yanni, Zhu Xiaojin, Liu Tao. Ultrasonic Testing System Based on OMAP5910[J]. Instrument Technique and Sensor, 2006(8): 37-38.
[9]毛保全，刘新亮，汪凡，等. 基于ADAMS和MATLAB的遥控武器站机电联合仿真[J]. 兵工自动化, 2011, 30(8)：27-30.
Mao Baoquan，Liu Xinliang，Wang Fan，et al. Mechanical-electronic Co-simulation for Remote Weapon Station Based on ADAMS and MATLAB[J]. Ordnance Industry Automation, 2011, 30(8)：27-30.

[1]	赵丁选, 郭瑞, 王硕, 闫长长, 王子鹤, 张天赐. 复杂地形环境下无人步履式挖掘机的车身姿态规划方法[J]. 中国机械工程, 2026, 37(1): 233-242.
[2]	孔慧芳, 王晨顺, 张倩, 刘田阔. 基于时空风险场的智能车辆轨迹规划[J]. 中国机械工程, 2025, 36(10): 2463-2471.
[3]	刘建林, 黄海松, 范青松, 马驰, 张浪浪. 基于改进樽海鞘群算法的机械臂多目标轨迹规划研究[J]. 中国机械工程, 2025, 36(09): 2047-2056.
[4]	王志强1, 韩建海1, 2, 3, 李向攀1, 2, 郭冰菁1, 2, 杜敢琴4. 冗余机器人的笛卡儿空间螺旋线性插值轨迹规划[J]. 中国机械工程, 2025, 36(01): 104-112.
[5]	荣誉, 陈刚, 豆天赐, . 一种多指标综合最优的抗冲击轨迹规划方法[J]. 中国机械工程, 2024, 35(02): 305-316.
[6]	吴超群, 赵松, 雷艇. 曲线焊缝的机器人焊接轨迹规划与高频控制[J]. 中国机械工程, 2023, 34(14): 1723-1728.
[7]	李佳璇, 李论, 周波, 赵吉宾, 朱光, 王正佳, . 基于Preston-PSO算法的多方向机器人磨抛轨迹生成方法[J]. 中国机械工程, 2023, 34(14): 1729-1740.
[8]	刘栋财, 董广宇, 杜玉红, 李文鹏, . 基于网格搜索算法的6-RUS并联机器人时间最优轨迹规划[J]. 中国机械工程, 2023, 34(13): 1589-1598.
[9]	刘怀兰, 赵文杰, 李世壮, 岳鹏, 马宝瑞. 数字孪生车间机器人虚实驱动系统构建方法[J]. 中国机械工程, 2022, 33(21): 2623-2632.
[10]	刘立业, 陈永亮, 汤伟莉, 魏云篷, 索树灿. 搅拌摩擦焊机床开放式控制系统及切线跟踪研究[J]. 中国机械工程, 2022, 33(16): 1948-1956.
[11]	孙晓军, 宋代平, 林敬周, 韩伟航. 风洞上攻角机器人轨迹规划算法研究与实现[J]. 中国机械工程, 2021, 32(16): 1963-1971.
[12]	刘志强1;顾献安1;郭昊1;奚浩1;王明强1;李军利2. 碳纤维螺旋桨自动铺放成形轨迹规划方法[J]. 中国机械工程, 2020, 31(17): 2079-2084,2094.
[13]	韩奉林1,3李鹏1,3李明辉1,3田亮2,3. 颗粒流驱动变刚度弯曲软体驱动器的设计及运动仿真[J]. 中国机械工程, 2020, 31(08): 890-897.
[14]	刘吉成;季洪超. 新型轮腿机器人步态规划策略[J]. 中国机械工程, 2019, 30(18): 2257-2262.
[15]	陈杰;董伟;盛鑫军;朱向阳. 基于螺旋样条的旋翼无人机区域轨迹规划[J]. 中国机械工程, 2019, 30(12): 1453-1459.