基于显式边界水平集方法流道优化设计

中国机械工程 ›› 2013, Vol. 24 ›› Issue (15): 2097-2100,2113.

基于显式边界水平集方法流道优化设计

钱小辉1,2;邓永波1;刘永顺1,2;吴一辉1;刘震宇1

1.中国科学院长春光学精密机械与物理研究所应用光学国家重点实验室,长春,130033
2.中国科学院大学,北京,100039

出版日期:2013-08-10 发布日期:2013-08-15
基金资助:
国家自然科学基金资助项目(509775272)
National Natural Science Foundation of China（No. 509775272）

An Explicit Boundary Level Set Method for Optimization Design of Fluid Channel

Qian Xiaohui1,2;Deng Yongbo1;Liu Yongshun1,2;Wu Yihui1;Liu Zhenyu1

1.State Key Laboratory of Applied Optics,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Sciences,Changchun,130033
2.University of Chinese Academy of Sciences,Beijing,100039

Online:2013-08-10 Published:2013-08-15
Supported by:
National Natural Science Foundation of China（No. 509775272）

摘要/Abstract

摘要：

为了解决流道优化设计中的流量分配问题,基于COMSOL Multiphysics软件进行二次开发,采用显式边界水平集方法和真实无滑移边界条件,数值求解不可压缩Navier-Stokes方程,提出了基于水平集边界显式化方法的适合管道流量分配的优化模型,并验证了优化模型的数值敏度,通过算例证明了基于显式边界水平集方法建立的优化模型能够有效地解决流道优化设计中流量分配的问题,并且在优化的过程中保留了水平集方法进行拓扑变化的特性。

关键词: 流道, 显式边界, 水平集方法, 优化设计

Abstract:

This paper focused on solving mass distribution problem of fluid channel design with COMSOL script,based on explicit boundary level set method(EbLSM) for incompressible Navier-Stokes flow.The physical field was solved by using explicit no-slip boundary conditions. A method to construct explicit boundaries and optimization model for mass distribution problem was discussed,and the model's sensitivity was verified numerically.Finally,the numerical examples illustrate that,based on the EbLSM,the proposed numerical model can solve mass distribution efficiently problem.At the same time,in the progress of optimization,the EbLSM possesses the capability to modify channel's topology.

Key words: fluid channel, explicit boundary, level set method, optimization design

中图分类号:

TB122

钱小辉1, 2, 邓永波1, 刘永顺1, 2, 吴一辉1, 刘震宇1. 基于显式边界水平集方法流道优化设计[J]. 中国机械工程, 2013, 24(15): 2097-2100,2113.

JIAN Xiao-Hui-1, 2, DENG Yong-Bei-1, LIU Yong-Shun-1, 2, TUN Yi-Hui-1, LIU Shen-Yu-1. An Explicit Boundary Level Set Method for Optimization Design of Fluid Channel[J]. China Mechanical Engineering, 2013, 24(15): 2097-2100,2113.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2013/V24/I15/2097

参考文献

[1]Guest J K, Prevost J H. Topology Optimization of Creeping Fluid Flows Using a Darcy-stokes Finite Element[J]. International Journal for Numerical Methods in Engineering, 2006,66 : 461-484.
[2]詹阳烈[1],庄春刚[1],熊振华[1],丁汉[1].基于水平集方法与FreeFEM的弹性结构拓扑优化[J].中国机械工程,2009(11):1326-1331.
[3]Osher S, Sethian J. Front Propagating with Curvature Dependent Speed:Algorithms Based on Hamilton-jacobi Formulations[J]. Journal of Computational Physics, 1988,79(1): 12-49.
[4]Sussman M. Smereka P, Osher S. A Level Set Approach for Computing Solutions to Incompressible 2 -phase Flow[J]. Journal of Computational Physics, 1994,114 : 146-159.
[5]Deng Y B,Liu Z Y,Wu Y H,el al. Topology Optimization of Unsteady Incompressible Navier- stokes Flows[J]. Journal of Computational Physics, 2010,230(17) :6688-6708.
[6]Liu Z Y,Korvink J G, Huang R Y. Structure Topology Optimization: Fully Coupled Level Set Method via FEMLAB[J]. Structural and Multidisciplinary Optimization, 2005,29:407-417.
[7]Mei Y L,Wang X M. Level Set Method for Topolo- gical Optimization Applying to Structure, Mecha- nism and Material Designs[J]. Chinese Journal of Mechanical Engineering, 2004,17 (2) : 200-209.
[8]Wang M Y,Chen S K,Wang X M. Design of Multi- material Compliant Mechanisms Using Level-set Methods[J]. Journal of Mechanical Design, 2005, 127(5) :941-956.
[9]Liu Z Y,Gao Q Y,Zhang P,et al. Topology Optimization of Fluid Channels with Flow Rate Equality Constraints [J].Structural and Multidisciplinary Optimization, 2011, 44 ( 1 ) : 31-37.
[10]Papadimitriou D I,Giannakoglou K C. Aerodynamic Shape Optimization Using First and Second Or- der Adjoint and Direct Approaches [J]. Arch. Comput. Methods Eng. ,2008,15..447-488.
[11]Challis V J,Guest J K. Level Set Topology Optimi- zation of Fluids in Stokes Flow[-J]. International Journal for Numerical Method in Engineering, 2009,79(10) :1284-1308.
[12]Sigmund O. A 99 Line Topology Optimization Code Written in Matlab[J]. Structural and Multidisciplinary Optimization, 2001,21:120-127.

[1]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[2]	朱潇, 沈惠平, 李菊, 李涛, 叶鹏达, 朱伟. 可轮换用动平台三自由度并联机构的拓扑设计及其性能分析[J]. 中国机械工程, 2026, 37(1): 114-125.
[3]	耿宇航, 何雪明, 高宗. 基于NURBS啮合线的高效双螺杆转子自适应设计方法[J]. 中国机械工程, 2025, 36(12): 2837-2845.
[4]	贺乐君, 习毅, 刘文, 严翔, 忻明杰, 王朝阳. 压力倍放高精感知机构设计方法研究[J]. 中国机械工程, 2025, 36(11): 2601-2608.
[5]	严天祥, 张家璇, 蓝慕淳, 陈虎城, 蒋海燕. 柔性瓣膜阀锥流道压电泵的设计与试验[J]. 中国机械工程, 2025, 36(11): 2618-2624.
[6]	龙千浩, 周颖, 高亮, 李好. 基于三维卷积神经网络的微结构性能快速预测[J]. 中国机械工程, 2025, 36(11): 2685-2693.
[7]	张鹏1, 3, 4, 5, 朱学卫2, 3, 4, 于保洋1, 3, 4, 武天枫1, 3, 4, 朱锦州1, 3, 4. 304不锈钢极薄带微流道气胀成形材料流动行为及微观组织[J]. 中国机械工程, 2025, 36(07): 1416-1422.
[8]	沈佳兴1, 2, 董建秀2, 范中海2, 于英华2. 防冲吸能液压支架点阵负泊松比吸能结构设计及优化[J]. 中国机械工程, 2025, 36(03): 515-524.
[9]	陈修龙, 王爱郭, 王景庆. 含转动副润滑间隙的多连杆机构动力学优化设计[J]. 中国机械工程, 2025, 36(01): 87-95.
[10]	张磊1, 2, 3, 孙学涛1, 2, 陈洁1, 2, 孙远波3, 郭佳佳1, 2, 郑杰1, 2. 汽车结构可靠性分析与优化设计研究进展[J]. 中国机械工程, 2024, 35(11): 1948-1962，1970.
[11]	黎朝阳1, 罗天洪2, 马翔宇2, 方尚晨1, 王珂3. 气动人工肌肉驱动的可变瞬心外骨骼设计与研究[J]. 中国机械工程, 2024, 35(10): 1783-1792.
[12]	闫利军1, 李广岐1, 刘勤2, 高景洲1, 宋华斌1, 骆小平1. 大口径火炮弹协调器机构可靠性优化设计研究[J]. 中国机械工程, 2024, 35(05): 877-885.
[13]	张萌, 张松林, 刘玉为, 刘时成, 范鹏举. 可调谐半导体激光器压电驱动系统的优化设计[J]. 中国机械工程, 2024, 35(04): 656-665.
[14]	韩飞燕, 顾志成, 赵一鹏, 张传伟. 基于参数映射的叶轮粗加工椭圆摆线轨迹优化[J]. 中国机械工程, 2024, 35(03): 438-444，456.
[15]	孙永国, 金欣, 薛冬, 单建平, 石晓春. 基于NSGA-Ⅱ的滑油泵叶轮结构优化设计[J]. 中国机械工程, 2024, 35(03): 559-569.