[1]KAMINAGE T, KUSAKA J. Improvement of Combustion and Exhaust Gas Emission in a Passenger Car Diesel Engine by Modification of Combustion Chamber Design[J]. SAE Paper, 2006-01-3435.
[2]SHI Y, REITZ R D. Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-duty Diesel Engine Operation at High-load [J]. SAE Paper, 2008-01-0949.
[3]刘国庆. 缸内直喷汽油机冷启动燃烧与排放光学试验研究[J]. 中国机械工程,2013,24(23):3164-3169.
LIU Guoqing. Study on Combustion and Emission of Cold Start for Gasoline Direct Injection Engine Based on Optical Experiments [J]. China Mechanical Engineering,2013,24(23):3164-3169.
[4]JUTTUTU S, THIPSE S S, MARATHE N V. CFD Study of Combustion Chambers for Lower Engine Exhaust Emissions from Diesel Engines Operation in HCCI and Conventional Diesel Mode[J]. SAE Paper,2009-26-0027.
[5]STYRON J, BALDWIN B, FULTON B, et al. Ford 2011 6.7L Power Stroke Diesel Engine Combustion System Development[J]. SAE Paper,2011-01-0415.
[6]KERCHGENS B, FELSCH C, VANEGAS A. Applying an Interactively Coupled CFD-multi-zone Approach to Study the Effects of Pistion Bowl Geometry Vatiation on PCCI Combustion[J]. SAE Paper,2009-01-1955.
[7]SHI Y, REITZ R D. Assessment of Optimization Methodologies to Study the Effects of Bowl Geometry, Spray Targeting and Swirl Ratio for a Heavy-duty Diesel Engine Operated at High-road[J]. SAE Paper,2008-01-0949.
[8]AKOP M Z, ZAMA Y, FURUHATA T, et al. Characteristics of Adhesion of Diesel Fuel on Impingement Disk Wall. Part 1: Effect of Impingement Area and Inclination Angle of Disk[J]. Atomization and Sprays,2013,23(8):725-744.
[9]刘宇,隆武强,杜宝国,等. 基于喷雾可视化装置的碰撞喷雾研究[J]. 内燃机工程,2008,29(1):20-23.
LIU Yu, LONG Wuqiang, DU Baoguo, et al. Research on Impingement Spray Based on Visualization System[J]. China International Combustion Engine Engineering,2008,29(1):20-23.
[10]杨立平,马修真,靖海国,等. 点燃式天然气发动机燃烧室结构优化的仿真与试验研究[J]. 中国机械工程,2013,24(21):2841-2846.
YANG Liping, MA Xiuzhen, JING Haiguo, et al. Simulation and Experiment Study on Optimization of Combustion Chamber Structure in Natural Gas Engine[J]. China Mechanical Engineering, 2013,24(21):2841-2846.
[11]吴键,花阳,王站成,等. 环境和燃油温度对丁醇/柴油混合燃料喷雾影响的模拟分析[J]. 河南科技大学学报,2015,36(1):28-33.
WU Jian, HUA Yang, WANG Zhancheng, et al. Simulation Analysis of Effect of Environmental and Fuel Temperature on Spray of Butanol/Diesel Blends [J]. Journal of Henan University of Science and Technology,2015,36(1):28-33.
[12]YU H, LIANG X, SHU G Q, et al. Numerical Investigation of the Effect of Alcohol-diesel Blending Fuels on the Spray-wall Impingement Process[J]. SAE Paper,2016-01-1276.
[13]范钱旺,高雅,董战力,等. 非对称多孔喷油器喷雾撞壁特性的试验与模拟[J]. 内燃机学报,2012,30(1):35-41.
FAN Qianwang, GAO Ya, DONG Zhanli, et al. Experiment and Simulation on Impinging Spray Characteristics of an Asymmetrical Multi-hole Injector[J]. Transactions of CSICE,2012,30(1):35-41.
[14]ZHU J, NISHIDA K, UEMURA T. Experimental Study on Flow Fields of Fuel Droplets and Ambient Gas of Diesel Spray-free Spray and Flat-wall Impinging Spray[J]. Atomization and Sprays,2014,24(7):599-623. |