China Mechanical Engineering ›› 2022, Vol. 33 ›› Issue (06): 727-739.DOI: 10.3969/j.issn.1004-132X.2022.06.012

Previous Articles     Next Articles

Research on Present Situation of Quality Control and Performance Optimization of Thermal Spraying Coating Based on Remelting Technology

HAN Bingyuan1,2 ;CHU Jiajie1;ZHOU Kebing2;ZHU Sheng2   

  1. 1.School of Automotive and Traffic Engineering,Jiangsu University of Technology,Changzhou,Jiangsu,213001
    2.National Key Lab for Remanufacturing,Academy of Army Armored Forces,Beijing,100072
  • Online:2022-03-25 Published:2022-04-21

基于重熔技术的热喷涂涂层质量调控与性能优化现状研究

韩冰源1,2;楚佳杰1;周克兵2;朱胜2   

  1. 1.江苏理工学院汽车与交通工程学院,常州,213001
    2.陆军装甲兵学院装备再制造技术国防科技重点实验室,北京,100072
  • 通讯作者: 朱胜(通信作者),男,1964年生,博士、教授。研究方向为材料加工工程、表面工程和再制造工程。发表论文150余篇。E-mail:zusg@sina.com。
  • 作者简介:韩冰源,女,1982年生,博士、副教授。研究方向为表面工程、再制造工程、热喷涂。发表论文30余篇。E-mail:hanbingyuan@jsut.edu.cn。
  • 基金资助:
    江苏省自然科学基金(BK20191036);
    基础科研计划项目(JCKY61420051911)

Abstract: The research progresses of various remelting techniques to improve the quality of thermal spraying coatings in recent years were summarized. The following conclusions are obtained:  laser remelting may obviously improve the quality of coatings by eliminating microcracks and unmelted particles in coatings, induction remelting may significantly reduce the porosity of coatings and enhance the mechanics properties of the coatings, and tungsten argon arc remelting can effectively improve the wear and corrosion resistance of coatings and improve the comprehensive properties of coatings. Electron beam remelting and flame remelting also improve the microstructure, microhardness and interfacial bonding strength of the coatings. Finally, the advantages and disadvantages of different remelting technologies were compared, and the development prospects of remelting technology were prospected.

Key words:  , thermal spraying coating, remelting, wear resistance, corrosion resistance

摘要: 总结了近年来各种重熔技术改善热喷涂涂层质量的研究进展,得到如下结论:激光重熔通过消除涂层中微裂纹、未熔颗粒等缺陷明显改善涂层的质量;感应重熔可以显著降低涂层的孔隙率,增强涂层的力学性能;钨极氩弧重熔可以更有效地提高涂层的耐磨耐蚀性,提升涂层综合性能;电子束重熔、火焰重熔等对涂层的微观组织、显微硬度、界面结合强度也有一定的改善作用。最后分析对比了不同重熔技术的优缺点和适用范围,并对重熔技术的发展前景进行了展望。

关键词: 热喷涂涂层, 重熔, 耐磨损, 耐腐蚀

CLC Number: