[1]谭晶,杨卫民,丁玉梅,等.滑环式组合密封件的研究(Ⅰ)——方形同轴密封件(格来圈)的分析[J].润滑与密封,2007,32(1):53-55.
TAN Jing,YANG Weimin,DING Yumei,et al. The Study of a Sliding Ring Combined Seal Ring(Ⅰ)—The Analysis of Rectangle Co-Axia Seal[J].Lubrication Engineering,2007,32(1):53-55.
[2]FRLICH D,MAGYAR B,SAUER B. A Comprehensive Model of Wear, Friction and Contact Temperature in Radial Shaft Seals[J].Wear,2014,311(1/2):71-80.
[3]陈国定,HAISER H,HAAS W,等.O形密封圈的有限元力学分析[J].机械科学与技术,2000,19(5): 740-742.
CHEN Guoding,HAISER H,HAAS W,et al. Analysis of Elastomeric O-ring Seals Using the Finite Element Method[J].Mechanical Science and Technology,2000, 19(5):740-742.
[4]FIRED I,JOHONSON A R. Nonlinear Computation of Axisymmetric Solid Rubber Deformation[J].Computer Methods in Applied Mechanics and Engineering,1998,67(2):241-253.
[5]NIKAS C K. Elastohydrodynamics and Mechanics of Rectangular Elastomeric Seals for Reciprocating Piston Rods[J]. Journal of Tribology,2003,125(1):60-69.
[6]GEORGE K, NIKAS C K, RICHARD S,et al. Computational Model of Tandem Rectangular Elastomeric Seals for Reciprocating Motion[J].Tribology International,2006,39 (1):622-634.
[7]PROKOP J,MULLER H K. Film Thickness, Contact Pressure and Friction of PTFE Rod Seals[C]//12th International Conference on Fluid Sealing. Brighton,1989:147-163.
[8]SLALANT R F,MASER N,YANG B. Numerical Model of a Reciprocating Hydraulic Rod Seal[J]. Journal of Tribology, 2007,129(1):91-97.
[9]RUSKELL L E. A Rapidly Converging Theoretical Solution of the Elastohydrodynamic Problem for Rectangular Rubber Seals[J]. Journal of Mechanical Engineering Science,1980,22(1):9-16.
[10]王伟,赵树高.橡胶O形密封圈的接触变形及应力分析[J].弹性体,2005,15(4):28-31.
WANG Wei,ZHAO Shugao. Analysis on Contact Deformation and Stress for Rubber O-sealing Ring [J].China Elastomerics,2005,15(4):28-31.
[11]谭晶,杨卫民,丁玉梅,等.O形橡胶密封圈密封性能的有限元分析[J].润滑与密封,2006(9):65-69.
TAN Jing,YANG Weimin,DING Yumei,et al. Finite Element Analysis of the Sealing Performance of O-ring Seal Structure[J]. Lubrication Engineering,2006(9):65-69.
[12]黄中华,金波,刘少军.深海高压舱密封性能评价研究[J].浙江大学学报(工学版),2007,41(5):790-793.
HUANG Zhonghua,JIN Bo,LIU Shaojun. Sealing Performance Evaluation of Deep Sea High Pressure Cabin[J].Journal of Zhejiang University(Engineering Science),2007,41(5):790-793.
[13]MAO J F,WANG W Z,LIU Y Z. Experimental and Theoretical Investigation on the Sealing Performance of the Combined Seals for Reciprocating Rod [J].Journal of Mechanical Science and Technology,2012,26(6):1765-1772.
[14]赵河明,韩宁.动态压力下旋转动密封结构有限元分析[J].现代制造工程,2014(10):81-85.
ZHAO Heming,HAN Ning. Finite Element Analysis of Rotary Sealing of O-ring[J].Modern Manufacturing Engineering,2014(10):81-85.
[15]KIM H K,NAM J H,HAWONG J S,et al. Evaluation of O-ring Stresses Subjected to Vertical and one Side Lateral Pressure by Theoretical Approximation Comparing with Photo Elastic Experimental Results[J]. Engineering Failure Analysis,2009,16(6):1876-1882.
[16]KIM H K,PARK S H,LEE H G,et al. Approximation of Contact Stress for a Compressed and Laterally One Side Restrained O-ring[J].Engineering Failure Analysis,2007,14(8):1680-1692. |