[1]朱桂双. 不同晶粒尺寸TC4钛合金高温变形行为研究[D]. 哈尔滨:哈尔滨工业大学,2007.
[2]Hamilton C, Dymek S, Sommers A. Characteristic Temperature Curves for Aluminum Alloys during Friction Stir Welding[J]. Welding Journal, 2010, 89(9): 189-194.
[3]Mishra R S, Ma Z Y. Friction Stir Welding and Processing[J]. Materials Science and Engineering R, 2005, 50(1/2): 1-78.
[4]Staron P, Kocak M, Williams S, et al. Residual Stresses in Friction Stir Welded Al Sheets[J]. Physica B Condensed Matter, 2004, 350(1/3): E491-E493.
[5]Williams S W, Price D A, Wescott A, et al. Distortion Control in Welding by Mechanical Tensioning[J]. Science and Technology of Welding and Joining, 2007, 12(7): 620-633.
[6]Ueda Y, Nakacho K, Shimizu T. Improvement of Residual Stresses of Circumferential Joint of Pipe by Heat-sink Welding[J]. Journal of Pressure Vessel Technology,Transaction of the ASME,1986,108(1):14-23.
[7]Guan Q. Low Stress Non-distortion(LSND)Welding -a New Technique for Thin Materials[J]. Welding International, 1994, 8(7): 41-48.
[8]柴鹏, 栾国红, 郭德伦, 等. FSW接头残余应力分布及控制技术[J]. 焊接学报, 2005, 36(11): 79-82.
Chai Peng, Luan Guohong, Guo Delun, et al. Distribution and Control of Residual Stresses in FSW Joints[J].Transactions of the China Welding Institution, 2005, 36(11): 79-82.
[9]Richards D G, Prangnell P B, Withers P J, et al. Simulation of the Effectiveness of Dynamic Cooling for Controlling Residual Stresses in Friction Stir Welds[C]∥7th Int. Friction Stir Welding Symposium. UK: TWI, 2008:1-10.
[10]Staron P, Kocak M, Williams S. Residual Stresses in Friction Stir Welded Al Sheets[J]. Applied Physics A, 2002, 74(1): S1161-S1162.
[11]李红克, 史清宇, 赵海燕, 等. 热量自适应搅拌摩擦焊热源模型[J]. 焊接学报, 2006, 27(11): 81-85.
Li Hongke, Shi Qingyu, Zhao Haiyan, et al. Auto Adapting Heat Source Model for Numerical Analysis of Friction Stir Welding[J]. Transactions of the China Welding Institution, 2006, 27(11): 81-85.
[12]赵俊敏, 王玉, 尹欣, 等. TC4钛合金搅拌摩擦焊温度场的数值模拟[J]. 机械工程材料,2008,32(2):78-81.
Zhao Junmin,Wang Yu,Yin Xin,et al.Numerical Simulation of Temperature Field in Friction StirWelding for TC4 Titanium Alloy[J]. Materials for Mechanical Engineering, 2008, 32(2): 78-81.
[13]Khandkar M Z H, Khan J A, Reyonlds A P. Prediction of Temperature Distribution and Thermal History during Friction Stir Welding: an Input Torque Based Model[J]. Science and Technology of Welding and Joining, 2003, 8(3): 165-174.
[14]Chao Y J, Qi X H. Thermal and Thermo-mechanical Modeling of Friction Stir Welding of Aluminum Alloy 6061-T6[J]. Journal of Materials Processing & Manufacturing Science, 1998, 7(2): 215-233.
[15]宋天民. 焊接残余应力的产生与消除[M]. 北京: 中国石化出版社, 2004.
[16]张昭,张洪武. 搅拌摩擦焊接中材料变形及残余应力分析[J]. 兵器材料科学与工程, 2006, 29(3): 61-66.
Zhang Zhao, Zhang Hongwu. Analysis of Material Deformations and Residual Stresses in Friction Stir Welding[J]. Ordnance Material Science and Engineering, 2006, 29(3): 61-66.
[17]李亭,史清宇,李红克,等.铝合金搅拌摩擦焊接头残余应力分布[J].焊接学报, 2007, 28(6): 105-108.
Li Ting, Shi Qingyu, Li Hongke, et al. Residual Stresses for Friction Stir Welded Al Sheets[J]. Transactions of the China Welding Institution, 2007, 28(6): 105-108.
[18]付强. 铝合金薄板搅拌摩擦焊残余应力及失稳变形的预测研究[D]. 天津: 天津大学, 2010.
[19]李言祥, 吴爱萍. 材料加工原理[M]. 北京: 清华大学出版社, 2005.
[20]方洪渊, 张学秋, 杨建国, 等. 焊接应力场与应变场的计算与讨论[J]. 焊接学报, 2008, 29(3): 129-132.
Fang Hongyuan, Zhang Xueqiu, Yang Jianguo, et al. Calculation and Discussion of Welding Stress and Strain Field[J]. Transactions of the China Welding Institution, 2008, 29(3): 129-132.
[21]Yang X Q, Li X H. Predictive Analysis of Buckling Distortion of Thin-plate Welded Structures[J]. China Welding, 2002, 11(2): 138-142.
|