[1]Lequeu P, Lassince P, Warner T, et al. Engineering for the Future: Weight Saving and Cost Reduction Initiative[J]. Aircraft Engineering and Aerospace Technology, 2001,73(2):147-159.
[2]Withers P J, Turski M, Edwards L, et al. Recent Advances in Residual Stress Measurement [J].International Journal of Pressure Vessels and Piping, 2008,85(3):118-127.
[3]陈苏琳,沈彬,张建国,等. CVD掺硅金刚石残余应力的X射线衍射和拉曼光谱分析[J].中国有色金属学报,2012,22(12):3021-3026.
Chen Suin,Shen Bin,Zhang Jianguo,et al. Evaluation on Residual Stresses of Silicon-doped CVD Diamond Films Using X-ray Diffraction and Raman Spectroscopy[J]. Transactions of Nonferrous Metals Society of China,2012,22(12):3021-3026.
[4]Zhang L,Feng X,Li Z G,et al. FEM Simulation and Experimental Study on the Quenching Residual Stress of Aluminum Alloy 2024[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture,2013,227(7):954-964.
[5]廖凯,吴运新,龚海,等.铝合金厚板淬火-预拉伸应力预测与测试[J].中国有色金属学报,2010,20(10):1901-1906.
Liao Kai,Wu Yunxin,Gong Hai,et al. Prediction and Measurement of Quenching-prestretching Stress in Aluminum Alloy Thick Plate[J]. Chinese Journal of Nonferrous Metals,2010,20(10):1901-1906.
[6]Hoffmann J E,Zgani M,Scholz D,et al. X-ray Residual Stress Analysis of Nitrided Low Alloyed Steels[J]. Materials Testing,2012,54(6):395-407.
[7]徐平光,友田阳.原位中子衍射材料表征技术的进展[J].金属学报,2006,42(7):681-688.
Xu Pingguang, Tomota Y. Progress in Materials Characterization Technique Based on in Situ Neutron Diffraction[J]. Acta Metallurgica Sinica,2006,42(7):681-688.
[8]Mahmoodi M, Sedighi M, Tanner D A.Investigation of through Thickness Residual Stress Distribution in Equal Channel Angular Rolled Al 5083 Alloy by Layer Removal Technique and X-ray Diffraction[J]. Materials and Design,2012,40:516-520.
[9]郭魂,左敦稳,王树宏,等. 铝合金预拉伸厚板内残余应力分布的测量[J]. 华南理工大学学报(自然科学版),2006,34(2):33-36.
Guo Hun,Zuo Dunwen,Wang Shuhong,et al. Measurement of Residual Stress Distribution in Thick Pre-stretched Aluminum Alloy Plate[J]. Journal of South China University of Technology(Natural Science Edition),2006,34(2):33-36.
[10]王树宏, 左敦稳, 润长生, 等. LY12, В95п.ч和7050铝合金预拉伸厚板内部残余应力分布特征评估与分析[J]. 材料工程, 2004(10): 32-35.
Wang Shuhong,Zuo Dunwen,Run Changsheng,et al.Evaluation and Comparison of Residual Stresses in Thick Pre-stretched Aluminum Plates of LY12,в95п.ч and 7050[J].Journal of Materials Engineering,2004(10):32-35.
[11]张延成,巩亚东,孙维堂,等.预拉伸铝合金厚板内部残余应力分布的测试方法[J]. 东北大学学报 (自然科学版),2008,29(7): 1041-1044.
Zhang Yancheng,Gong Yadong,Sun Weitang,et al. Measurement of Residual Stress Distribution in Pre-stretched Thick Aluminum Plate[J]. Journal of Northeastern University(Natural Science),2008,29(7):1041-1044.
[12]张磊. 航空薄壁零件切削加工变形仿真及控制[D]. 北京:北京航空航天大学,2013.
[13]米谷茂. 残余应力的产生和对策[M]. 北京:机械工业出版社,1983.
[14]龚海,吴运新,廖凯. 铝合金厚板残余应力测试方法有效性分析[J].材料工程,2010(1):42-46.
Gong Hai,Wu Yunxin,Liao Kai. Analysis on Validity of Residual Stress Measurement Methods for Aluminum Alloy Thick-plate[J]. Journal of Materials Engineering,2010 (1):42-46.
[15]Prime M B,Hill M R. Residual Stress, Stress relief, and Inhomogeneity in Aluminum Plate[J]. Scripta Materialia,2002,46(1):77-82.
|