|
|
Postprocessing Performance Regulation for Ceramic Part Based on Controllable Binder Jet Printing Processes |
CAO Shu1,2;HE Xueming3;XIE Fangxia1;YU Jinghu3 |
1. School of Mechanical Engineering, Jiangnan University, Wuxi, Jiangsu, 214122
2. School of Mechanical Technology, Wuxi Institute of Technology, Wuxi,Jiangsu, 214121
3. Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology,
Wuxi,Jiangsu, 214122 |
|
|
Abstract It was difficult to control the structure of the ceramic parts or to realize a high-density green body, and the effects of postprocessing at atmospheric pressure were usually poor when forming ceramic green parts by commercial BJP system. The densification of Al2O3 green specimens were controlled by adjusting the formulation of molding powder materials, adjusting the thickness of powder layers and switching powder-dispensing method based on the self-developed BJP system and own material. The relatively density of the high-dense green specimens was reached 43.9%. Furthermore, the integrated post-processing procedure of “ceramic slurry infiltration and stepwise sintering” was used to study the infiltration-strengthening mechanism against different green bodies, and thereby, presintering processes were regulated to significantly improve the final performance of high density green bodies, having the relatively density, bending strength and compressive strength of 89.3%, 91.9 MPa and 813.2 MPa, respectively, after sintering under atmospheric pressures. The forming material, process procedures and equipment applied in this study had low threshold and were easy to operate, providing a flexible and quick technical scheme for the preparation of high-performance structural ceramics.
|
|
|
|
|
|
[1] |
李淑娟, 包惠同, 张恒. 三维陶瓷零件低温沉积过程挤压力建模及自适应控制[J]. 机械科学与技术, 2016, 35(2): 253-259.
|
|
LI Shujuan , BAO Huitong, ZHANG Heng. Modeling for Extrusion Force and Adaptive Control in the Freeze Deposition Process of Three Dimensional Ceramic Components[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(2): 253-259.
|
[2] |
周汝垚, 帅茂兵, 蒋驰. 陶瓷材料增材制造技术研究进展[J]. 材料导报, 2016, 30(1): 67-72.
|
|
ZHOU Ruyao, SHUAI Maobing, JIANG Chi. Research Progress in Additive Manufacturing Technology of Ceramic Material[J]. Materials Reports, 2016, 30(1): 67-72.
|
[3] |
GAO W, ZHANG Y, RAMANUJAN D, et al. The Status, Challenges, and Future of Additive Manufacturing in Engineering[J]. Computer-Aided Design, 2015, 69: 65-89.
|
[4] |
PRAKASH K S, NANCHARAIH T, RAO V V S. Additive Manufacturing Techniques in Manufacturing-an Overview[J]. Materials Today: Proceedings, 2018, 5(2): 3873-3882.
|
[5] |
卢秉恒. 增材制造技术——现状与未来[J]. 中国机械工程, 2020, 31(1): 19-23.
|
|
LU Bingheng. Additive Manufacturing—Current Situation and Future[J]. China Mechanical Engineering, 2020, 31(1): 19-23.
|
[6] |
DING D, PAN Z, CUIURI D, et al. Wire-feed Additive Manufacturing of Metal Components: Technologies, Developments and Future Interests[J]. The International Journal of Advanced Manufacturing Technology, 2015, 81(1/4): 465-481.
|
[7] |
王蔚,刘永贤,FUH Y X J. ZrO2对激光烧结Al2O3/SiO2/ZrO2显微组织和显微硬度的影响[J]. 中国机械工程, 2014, 25(6): 727-730.
|
|
WANG Wei, LIU Yongxian, FUH Y X J. Effect of ZrO2 on Microstructure and Microhardness for Laser Sintered Al2O3/SiO2/ZrO2[J]. China Mechanical Engineering, 2014,25(6): 727-730.
|
[8] |
WU H, LIU W, HE R, et al. Fabrication of Dense Zirconia-toughened Alumina Ceramics through a Stereolithography-based Additive Manufacturing[J]. Ceramics International, 2017, 43(1): 968-972.
|
[9] |
唐萍. 多孔堇青石陶瓷增材制造工艺及性能[D]. 武汉: 华中科技大学, 2016.
|
|
TANG Ping. The Manufacturing Process and Properties of Porous Cordierite Ceramics by Additive Manufacturing[D]. Wuhan: Huazhong University of Science and Technology, 2016.
|
[10] |
DECKERS J P, SHAHZAD K, CARDON L, et al. Shaping Ceramics through Indirect Selective Laser Sintering[J]. Rapid Prototyping Journal, 2016, 22(3): 544-558.
|
[11] |
LIU K, SHI Y, HE W, et al. Densification of Alumina Components via Indirect Selective Laser Sintering Combined with Isostatic Pressing[J]. The International Journal of Advanced Manufacturing Technology, 2013, 67(9/12): 2511-2519.
|
[12] |
SCHWENTENWEIN M, HOMA J. Additive Manufacturing of Dense Alumina Ceramics[J]. International Journal of Applied Ceramic Technology, 2015, 12(1): 1-7.
|
[13] |
TRAVITZKY N, BONET A, DERMEIK B, et al. Additive Manufacturing of Ceramic-based Materials[J]. Advanced Engineering Materials, 2014, 16(6): 729-754.
|
[14] |
LYU X, YE F, CHENG L, et al. Binder Jetting of Ceramics: Powders, Binders, Printing Parameters, Equipment, and Post-treatment[J]. Ceramics International, 2019, 45(10): 12609-12624.
|
[15] |
GOKULDOSS P K, KOLLA S, ECKERT J. Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines[J]. Materials, 2017, 10(6): 672.
|
[16] |
MALEKSAEEDI S, ENG H, WIRIA F E, et al. Property Enhancement of 3D-printed Alumina Ceramics Using Vacuum Infiltration[J]. Journal of Materials Processing Technology, 2014, 214(7): 1301-1306.
|
[17] |
TANG H H, CHIU M L, YEN H C. Slurry-based Selective Laser Sintering of Polymer-coated Ceramic Powders to Fabricate High Strength Alumina Parts[J]. Journal of the European Ceramic Society, 2011, 31(8): 1383-1388.
|
[18] |
UTELA B, STORTI D, ANDERSON R, et al. A Review of Process Development Steps for New Material Systems in Three Dimensional Printing (3DP)[J]. Journal of Manufacturing Processes, 2008, 10(2): 96-104.
|
[19] |
KUNCHALA P, KAPPAGANTULA K. 3D Printing High Density Ceramics Using Binder Jetting with Nanoparticle Densifiers[J]. Materials & Design, 2018, 155: 443-450.
|
[20] |
DUNKY M. Urea-formaldehyde (UF) Adhesive Resins for Wood[J]. International Journal of Adhesion and Adhesives, 1998, 18(2): 95-107.
|
[21] |
SUN C, TIAN X, WANG L, et al. Effect of Particle Size Gradation on the Performance of Glass-ceramic 3D Printing Process[J]. Ceramics International, 2017, 43(1): 578-584.
|
[22] |
CAO S, QIU Y, WEI X F, et al. Experimental and Theoretical Investigation on Ultra-thin Powder Layering in Three Dimensional Printing (3DP) by a Novel Double-smoothing Mechanism[J]. Journal of Materials Processing Technology, 2015, 220: 231-242.
|
[23] |
GREENWOOD R, BERGSTRM L. Electroacoustic and Rheological Properties of Aqueous Ce-ZrO2 (Ce-TZP) Suspensions[J]. Journal of the European Ceramic Society, 1997, 17(4): 537-548.
|
[24] |
PALMQVIST L, LYCKFELDT O, CARLSTRM E, et al. Dispersion Mechanisms in Aqueous Alumina Suspensions at High Solids Loadings[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2006, 274(1/3): 100-109.
|
[25] |
ZHANG W, MELCHER R, TRAVITZKY N, et al. Three-dimensional Printing of Complex-shaped Alumina/Glass Composites[J]. Advanced Engineering Materials, 2009, 11(12): 1039-1043.
|
|
|
|