Analyses and Control of Influence Factors for Multi-plate Wet Clutches in Fast Oil Filling Processes

Abstract

Abstract: In order to obtain the ideal control effectivenesses of fast oil filling for clutches, the influences of hydraulic oil temperatures, engine rotating speeds and clutch rotating speeds on fast oil filling time for clutches were studied through theoretical analyses and simulation model. The research results show that the main factors affecting fast oil filling time of clutches are hydraulic oil temperatures and engine rotating speeds. A fast oil filling control strategy for clutches was proposed and tested. The test results show that the proposed control strategy is feasible.

Key words: clutch, fast oil filling, influence factor, control strategy

摘要： 为了获得理想的离合器快充油控制效果，通过理论分析与模型仿真，研究了液压油温度、发动机转速和离合器转速对离合器快充油时间的影响规律，研究结果表明：影响离合器快充油时间的主要因素为液压油温度和发动机转速。制定了离合器快充油控制策略并进行了试验验证，试验结果表明所提控制策略可行。

关键词: 离合器, 快充油, 影响因素, 控制策略

CLC Number:

U463.221

LI Chunfu1;XI Junqiang2;LIU Chunying3. Analyses and Control of Influence Factors for Multi-plate Wet Clutches in Fast Oil Filling Processes[J]. China Mechanical Engineering.

李春芾1;席军强2;刘春颖3. 多片湿式离合器快充油过程影响因素分析与控制[J]. 中国机械工程.

References

[1]冯能莲. 车辆综合传动换挡动态特性仿真及模糊控制研究[D]. 北京: 北京理工大学, 2001.
FENG Nenglian. Study on Simulation and Fuzzy Control Strategy of the Power-switch Steering Transmission[D]. Beijing: Beijing Institute of Technology, 2001.
[2]张涛，陶刚，陈慧岩.电控自动变速器升挡转矩相控制策略[J].汽车工程，2013，35(2)：173-178.
ZHANG Tao， TAO Gang, CHEN Huiyan. Control Strategy for the Torque Phase in Up-shift Process of an Electrically-controlled Automatic Transmission[J]. Automotive Engineering, 2013, 35(2):173-178.
[3]LEI Y L, GE A L, LI Y J. The Starting Control Strategy of DCT[J]. J. Autom. Eng., 2000，22(4): 266-281.
[4]赵治国，仇江海. DCT车辆起步及换挡过程双离合器H∞鲁棒控制[J].中国机械工程，2012，23(6)：745-751.
ZHAO Zhiguo, QIU Jianghai. H∞ Robust Control for Twin Clutches of DCT during Vehicle's Staring and Shifting Processes[J]. China Mechanical Engineering, 2012,23(6):745-751.
[5]MENG F, CHEN H, ZHANG T, et al. Clutch Fill Control of an Automatic Transmission for Heavy-duty Vehicle Applications[J]. Mechanical Systems and Signal Processing， 2015, 64/65: 16-28.
[6]WALKER P D, ZHANG N， TAMBA R. Control of Gear Shifts in Dual Clutch Transmission Powertrains[J]. Mechanical Systems and Signal Processing, 2011, 25(6): 1923-1936.
[7]WATECHAGIT S. Modeling and Estimation for Stepped Automatic Transmission with Clutch-to-clutch Shift Technology[D]. Columbus:Ohio State University, 2004.
[8]YU C H, CHEN H C, DING H R. The Fuzzy Control of DCT Vehicles in Starting Process[J]. Journal of Automobile Engineering, 2005,27(4)：423-430.
[9]王尔烈，陶刚，陈亮，等. 越野车辆大功率AT换挡离合器充油控制[J].兵工学报，2013, 34(2): 137-142.
WANG Erlie，TAO Gang，CHEN Liang，et al. Oil Pressure Control for Shifting Process of Off-road Vehicle with High-power Automatic Transmission[J]. Acta Armamentarii, 2013,34(2):137-142.
[10]王娟. 数字化自适应换挡控制策略的研究[D]. 北京: 北京理工大学, 2008.
WANG Juan. Study on Digital Adaptive Shift Control Strategy[D]. Beijing: Beijing Institute of Technology, 2008.
[11]朱经昌, 魏宸官, 郑慕桥. 车辆液力传动[M]. 北京: 国防工业出版社，1982.
ZHU Jingchang, WEI Chenguan, ZHENG Muqiao.Hydraulic Transmission of Vehicle[M]. Beijing: National Defense Industry Press,1982.

[1]	LI Jie, MA Chao, WANG Xiaoyan. Research on Drag Torque Characteristics of Wet Clutchs under High Linear Speed Conditions [J]. China Mechanical Engineering, 2023, 34(22): 2693-2703，2710.
[2]	XIA Guang, WEI Zhixiang, TANG Xiwen, ZONG Huayu, WANG Shaojie. Research on Mode Switching Analysis and Control of New Hydraulic Mechanical Dual-flow Transmissions [J]. China Mechanical Engineering, 2023, 34(13): 1611-1627.
[3]	XU Long, HU Zhiqiang, YANG Yi, WANG Chao, . Study on Engagement Characteristics of Gear Overrunning Clutch of Aquatic-aerial Amphibious Propellers [J]. China Mechanical Engineering, 2023, 34(09): 1126-1133.
[4]	ZHANG Wenjun, ZHANG Yandong, LIN Wei, ZHAI Qianjun, BAI Zhenhua, . Research on Influence Model and Influence Factors of Welding Quality of Continuous Annealing Units [J]. China Mechanical Engineering, 2022, 33(15): 1876-1881.
[5]	ZHANG Xingui, SHI Xinglei, YU Zilin, ZHONG Zhenyuan, LI Jia. Drag Torque Algorithm of Wet DCT and Its ApplicationsLIU Bo [J]. China Mechanical Engineering, 2022, 33(15): 1882-1889.
[6]	YANG Xiao, ZENG Lingwan, CHEN Peng, DU Yanbin, LI Bo. Complex Characteristics and Multi-dimensional Control Strategies of Heat Flow in Dry Gear Hobbing Machines [J]. China Mechanical Engineering, 2022, 33(05): 623-629.
[7]	SUN Xiaojun, SONG Enzhe, YAO Chong. Research Status of Key Technologies for Energy Management System of Marine Hybrid Propulsion Systems [J]. China Mechanical Engineering, 2022, 33(04): 469-481,495.
[8]	WANG Kun, NI Xiaobo, LI Honggeng, HE Jiayang, HUANG Yuanyi, HOU Gaojie. Development of Booming Performance of Rear-drive Vehicles Based on Multi-body Dynamics Models [J]. China Mechanical Engineering, 2021, 32(22): 2765-2771.
[9]	YAN Hongzhi1,2,3;WANG Zhibiao1,3;ZHU Chu2,3,4;CAI Mengkai2,3;LI Jia2,3;HU Xuan2,3. Effects of Gravity Center Position of Sprags on Sprag Clutch Performance [J]. China Mechanical Engineering, 2021, 32(03): 253-260.
[10]	MO Chongxiang;XIU Caijing;LIANG Wanwu. Design of P2 Hybrid Engine Start Control [J]. China Mechanical Engineering, 2021, 32(01): 117-125.
[11]	HAN Ling, LIU Hongxiang, CAO Yue, REN Leilei. Model Predictive Control-based Starting Control Optimization Strategy for CVTs [J]. China Mechanical Engineering, 2020, 31(15): 1765-1771.
[12]	ZHANG Lixia, PANG Qiqi, PAN Fuquan, GE Xiaohan, LIN Binqin, HE Yichao, WEI Yintao, DU Yongchang. Suspension Control Applications of Magnetorheological Damper Magic Formula Model [J]. China Mechanical Engineering, 2020, 31(14): 1659-1665.
[13]	LI Yongquan1,2;WU Pengtao1,2;ZHANG Yang1,2 ;ZHANG Lijie2,3. Dynamics Parameter Identification and Control of a Spherical 2-DOF Redundant Driven Parallel Robot System [J]. China Mechanical Engineering, 2019, 30(16): 1967-1975.
[14]	LIU Yanwei1;ZHU Yunxue1;LIN Ziyue1;ZHAO Kegang2;HUANG Xiexin3. Research on Models of Overrunning Clutch-Gear Systems Considering Dynamic Characteristics of Self-locking Components [J]. China Mechanical Engineering, 2019, 30(15): 1765-1775.
[15]	SONG Shouxu, WANG Wei, KE Qingdi, QIU Quan. Design Method of Predecisional Remanufacturing Based on Component Structure Coupling Relationship [J]. China Mechanical Engineering, 2018, 29(21): 2521-2526,2538.