Complex Characteristics and Multi-dimensional Control Strategies of Heat Flow in Dry Gear Hobbing Machines

doi:10.3969/j.issn.1004-132X.2022.05.012

Abstract

Abstract: Aiming at the thermostability of dry gear hobbing machines, the heat flow characteristics and optimal control strategies were studied. By analyzing the features of drive method and structural layout, the complex and multi-source characteristics were explored for heat flow of dry gear hobbing machines. And further, multi-field coupled model was established for heat storage of dry gear hobbing machine based on macro and micro heat transfer mechanism. Finally, multi-dimensional control strategies were proposed for analyzing influence factor of thermostability. The involved strategies contain the collaborative optimization of thermostability, the field synergy enhancement of compressed air and the multi-sensor data fusion perceived control of the heat flow.

Key words: dry gear hobbing machine, heat flow characteristic, thermostability, control strategy

摘要： 针对干切滚齿机床的热稳定性问题，研究其热量流动特性及优化控制策略。通过分析传动方式和结构布局特征，阐明了干切滚齿机床的热流复杂多源特性。基于宏微观传热动力学，建立了结构流体温度多场耦合的干切滚齿机床储热模型。通过热稳定性致变因子探析，提出了干切滚齿机床热流多维调控方法，包括热稳定性多源协同优化、压缩空气场协同强化换热、热流多传感器数据感知融合控制等。

关键词: 干切滚齿机床, 热流特性, 热稳定性, 调控策略

CLC Number:

TG61

YANG Xiao, ZENG Lingwan, CHEN Peng, DU Yanbin, LI Bo. Complex Characteristics and Multi-dimensional Control Strategies of Heat Flow in Dry Gear Hobbing Machines[J]. China Mechanical Engineering, 2022, 33(05): 623-629.

杨潇, 曾令万, 陈鹏, 杜彦斌, 李博. 干切滚齿机床热流复杂特性及多维调控策略[J]. 中国机械工程, 2022, 33(05): 623-629.

References

［1］ELIE B N, MAYER J. Modelling and Compensation of Dominant Thermally Induced Geometric Errors Using Rotary Axes Power Consumption［J］. CIRP Annals—Manufacturing Technology, 2018, 67(1):547-550.
［2］BRECHER C, KLATTE M, LEE T H, et al. Metrological Analysis of a Mechatronic System Based on Novel Deformation Sensors for Thermal Issues in Machine Tools［J］. Procedia CIRP, 2018, 77:517-520.
［3］IBARAKI S, BLASER P, SHIMOIKE M, et al. Measurement of Thermal Influence on a Two-dimensional Motion Trajectory Using a Tracking Interferometer［J］. CIRP Annals—Manufacturing Technology, 2016, 65(1):483-486.
［4］BLASER P, PAVLICEK F, MORI K, et al. Adaptive Learning Control for Thermal Error Compensation of 5-axis Machine Tools［J］. Journal of Manufacturing Systems, 2017, 44:302-309.
［5］SHI Hu, MA Chi, YANG Jun, et al. Investigation into Effect of Thermal Expansion on Thermally Induced Error of Ball Screw Feed Drive System of Precision Machine Tools［J］. International Journal of Machine Tools and Manufacture, 2015, 97:60-71.
［6］TAN Bo, MAO Xinyong, LIU Hongqi, et al. A Thermal Error Model for Large Machine Tools That Considers Environmental Thermal Hysteresis Effects ［J］. International Journal of Machine Tools and Manufacture, 2014, 82/83:11-20.
［7］LIU Jialan, MA Chi, WANG Shilong, et al. Thermal-structure Interaction Characteristics of a High-speed Spindle-bearing System［J］. International Journal of Machine Tools and Manufacture, 2019, 137:42-57.
［8］LIU Teng, GAO Weiguo, ZHANG Dawei, et al. Analytical Modeling for Thermal Errors of Motorized Spindle Unit［J］. International Journal of Machine Tools and Manufacture, 2017, 112:53-70.
［9］CAO Huajun, ZHU Libin, LI Xianguang, et al. Thermal Error Compensation of Dry Hobbing Machine Tool Considering Workpiece Thermal Deformation ［J］. International Journal of Advanced Manufacturing Technology, 2016, 86:1739-1751.
［10］陈永鹏, 曹华军, 李先广, 等. 高速干切滚齿机床热变形误差模型及试验研究［J］. 机械工程学报, 2013, 49(7):36-42.
CHEN Yongpeng, CAO Huajun, LI Xianguang, et al. Study on Modeling and Experiment of Thermal Deformation Error for High-speed Dry Hobbing Machine［J］. Journal of Mechanical Engineering, 2013, 49(7):36-42.
［11］LI Xianguang, YANG Yong, ZOU Zheng, et al. Critical Study on the Thermal-structural Characteristics of Worktable Assembly of a Dry Hobbing Machine［J］. International Journal of Advanced Manufacturing Technology, 2019, 100:17-188.
［12］ZHU Libin, CAO Huajun, HUANG Haihong, et al. Exergy Analysis and Multi-objective Optimization of Air Cooling System for Dry Machining［J］. International Journal of Advanced Manufacturing Technology, 2017, 93:3175-3188.
［13］LI Benjie, CAO Huajun, HON B, et al. Exergy-based Energy Efficiency Evaluation Model for Machine Tools Considering Thermal Stability［J］. International Journal of Precision Engineering and Manufacturing—Green Technology, 2021, 8:423-434.
［14］YANG Xiao, CAO Huajun, LI Benjie, et al. A Thermal Energy Balance Optimization Model of Cutting Space Enabling Environmentally Benign Dry Hobbing［J］. Journal of Cleaner Production, 2018, 172:2323-2335.
［15］LI Zhenjun, ZHAO Chunyu, LU Zechen. Thermal Error Modeling Method for Ball Screw Feed System of CNC Machine Tools in x-axis［J］. International Journal of Advanced Manufacturing Technology, 2020, 106:5383-5392.
［16］DU Zhengchun, YAO Siyu, YANG Jianguo. Thermal Behavior Analysis and thermal Error Compensation for Motorized Spindle of Machine Tools［J］. International Journal of Precision Engineering and Manufacturing, 2015, 16(7):1571-1581.
［17］ROY S, SAHA S K. Thermal and Friction Characteristics of Laminar Flow through a Circular Duct Having Helical Screw-tape with Oblique Teeth Inserts and Wire Coil Inserts ［J］. Experimental Thermal and Fluid Science, 2015, 68:733-743.
［18］SCHEY J A. Introduction to Manufacturing Processes［M］. 3rd ed. Boston:McGraw-Hill, 2000.
［19］张洪潮, 孔露露, 李涛, 等. 切削比能模型的建立及参数影响分析［J］. 中国机械工程, 2015, 26(8):1098-1104.
ZHANG Hongchao, KONG Lulu, LI Tao, et al. SCE Modeling and Influencing Trend Analysis of Cutting Parameters ［J］. China Mechanical Engineering, 2015, 26(8):1098-1104.
［20］BERGMAN T L, LAVINE A S, INCROPERA F P, et al. Fundamentals of Heat and Mass Transfer［M］. 7th ed. Danvers:John Wiley & Sons, 2011.
［21］YANG Xiao, CAO Huajun, CHEN Yongpeng, et al. An Analytical Model of Chip Heat-carrying Capacity for High-speed Dry Hobbing Based on 3D Chip Geometry ［J］. International Journal of Precision Engineering and Manufacturing, 2017, 18(2):245-256.

[1]	SUN Xiaojun, SONG Enzhe, YAO Chong. Research Status of Key Technologies for Energy Management System of Marine Hybrid Propulsion Systems [J]. China Mechanical Engineering, 2022, 33(04): 469-481,495.
[2]	MO Chongxiang;XIU Caijing;LIANG Wanwu. Design of P2 Hybrid Engine Start Control [J]. China Mechanical Engineering, 2021, 32(01): 117-125.
[3]	ZHANG Lixia, PANG Qiqi, PAN Fuquan, GE Xiaohan, LIN Binqin, HE Yichao, WEI Yintao, DU Yongchang. Suspension Control Applications of Magnetorheological Damper Magic Formula Model [J]. China Mechanical Engineering, 2020, 31(14): 1659-1665.
[4]	LI Yongquan1,2;WU Pengtao1,2;ZHANG Yang1,2 ;ZHANG Lijie2,3. Dynamics Parameter Identification and Control of a Spherical 2-DOF Redundant Driven Parallel Robot System [J]. China Mechanical Engineering, 2019, 30(16): 1967-1975.
[5]	LI Chunfu1;XI Junqiang2;LIU Chunying3. Analyses and Control of Influence Factors for Multi-plate Wet Clutches in Fast Oil Filling Processes [J]. China Mechanical Engineering, 2019, 30(05): 513-518.
[6]	WANG Yongkuan1,2;QIAN Lijun1;NIU Limin2. Multi-objective Optimization of Control Strategies for Four-wheel Drive PHEV Based on Immune Algorithm [J]. China Mechanical Engineering, 2017, 28(14): 1683-1690.
[7]	TAN Xianwen, FANG Jinhui, FEI Shuhui, JIN Yuefeng. Simulation on Parameter Matching Based on Multi Control Strategies of Oil-hydraulic Hybrid Excavator [J]. China Mechanical Engineering, 2017, 28(09): 1043-1049.
[8]	Mao Jun, Yang Zhenhua, Pan Dewen. Control Strategy of Shearer Automatic Height Adjusting Based on Adaptive Fuzzy Sliding-mode Variable Structure [J]. China Mechanical Engineering, 2016, 27(03): 360-364.
[9]	Yao Jing, Cao Xiaoming, Li Bin, Kong Xiangdong, Zhou Fang. Research on Energy Saving of Pressure and Displacement Compound Control Strategy for Fast Forging System [J]. China Mechanical Engineering, 2016, 27(02): 265-272.
[10]	Gao Aiyun, Deng Xiaozhong, Zhang Mingzhu, Fu Zhumu. Regenerative Braking Control Strategy for PHEV Based on Optimal Braking Effect [J]. China Mechanical Engineering, 2015, 26(15): 2118-2124.
[11]	Zhang Donghao, Xiang Changle, Han Lijin, Zheng Hailiang. Research on Dynamic Control Strategy of a HEV Based on Drivability Optimization [J]. China Mechanical Engineering, 2015, 26(11): 1550-1555.
[12]	Zheng Hailiang, Xiang Changle, Han Lijin, Zhang Donghao. Power Distribution Strategy Optimization for Two-mode Electro-mechanical Transmission [J]. China Mechanical Engineering, 2015, 26(10): 1415-1419.
[13]	Zhang Kejun, Chen Jian. Research on Potential Energy Recovery System for Electric Forklift [J]. China Mechanical Engineering, 2014, 25(21): 2869-2874.
[14]	Liu Yonggang, Qin Datong, Peng Zhiyuan, Ye Ming. Experimental Research on Hardware-in-the-Loop of Novel Hybrid Electric System [J]. China Mechanical Engineering, 2014, 25(17): 2374-2380.
[15]	XU Xiao-Jun, CHEN Xun, HU Yong-Pan. Design of Heave Compensation System and Prototype Development Based on Planetary Transmission Speed Governor [J]. China Mechanical Engineering, 2013, 24(5): 604-609.