[1]GEZGIN E, CHANG P H, AKHAN A F. Synthesis of a Watt Ⅱ Six-bar Linkage in the Design of a Hand Rehabilitation Robot[J]. Mechanism & Machine Theory, 2016, 104: 177-189.
[2]陈学斌,高海鹏,刘文勇,等.手外骨骼康复技术研究进展[J].中国医疗设备,2016,31(2):86-91.
CHEN Xuebin, GAO Haipeng, LIU Wenyong, et al. Research on the Development of Hand Exoskeleton as a Rehabilitation Technology [J]. China Medical Devices, 2016, 31(2): 86-91.
[3]易荣武,王爱民.手指远程康复训练机器人系统设计 [J].电子测量技术,2016,39(9):128-132.
YI Rongwu, WANG Aimin. Design of Remote Rehabilitation Training Robotic System for Fingers [J]. Electronic Measurement Technology, 2016, 39(9):128-132.
[4]张帆,郭书祥,魏巍.欠驱动式外骨骼手指康复机器人的设计和仿真 [J].天津理工大学学报,2015,31(2):30-34.
ZHANG Fan, GUO Shuxiang, WEI Wei. The Design and Simulation of the under Actuation Exoskeleton Finger Rehabilitation Robot [J]. Journal of Tianjin University of Technology, 2015,31(2):30-34.
[5]杨成阳,尤跃东,赵岩. 手指康复机器人串联弹性驱动器的设计与仿真[J].机械制造,2016,54(7):4-7.
YANG Chengyang, YOU Yuedong, ZHAO Yan. Design and Simulation of a Series of Flexible Elastic Actuator for Finger Rehabilitation [J]. Machinery, 2016,54(7):4-7.
[6]李超,袁锐波,丘世因,等.外骨骼康复机械手的结构设计及仿真分析[J].机械与电子,2016,34(2):16-19.
LI Chao, YUAN Ruibo, QIU Shiyin, et al. Design and Kinematical Analysis of Exoskeletal Rehabilitation Robot Hand [J]. Machinery & Electronics,2016,34(2):16-19.
[7]郑杨,陈垒,王刚,等. 欠驱动式手指康复训练装置的结构优化设计[J].西安交通大学学报,2008,29(4):151-156.
ZHENG Yang, CHEN Lei, WANG Gang, et al. A Structure Optimal Design of Training Devices for the Under-actuated Hand Rehabilitation [J]. Journal of Xi’an Jiaotong University, 2008, 29 (4):151-156.
[8]SOEKADAR S R, WITKOWSKI M, VITIELLO N, et al. An EEG/EOG-based Hybrid Brain-neural Computer Interaction(BNCI) System to Control an Exoskeleton for the Paralyzed Hand[J]. Biomedizinische Technik Biomedical Engineering, 2015, 60(3): 199-205.
[9]WANG J, LI J, ZHANG Y, et al. Design of an Exoskeleton for Index Finger Rehabilitation[C]//Conf. Proc. IEEE Eng. Med. Biol. Soc.. Minnesota, USA, 2009: 5957-5960.
[10]刘洪山.手创伤康复机械手结构设计与分析[D].哈尔滨:哈尔滨工业大学,2007.
LIU Hongshan. Structure Desing and Analysis of Mechanical Hand for Rehabilitation[D]. Harbin: Harbin Institute of Technology, 2007.
[11]IQBAL J, TSAGARAKIS N G, FIORILLA A E, et al. A Portable Rehabilitation Device for the Hand.[C]// Conf. Proc. IEEE Eng. Med. Biol. Soc. Engineering in Medicine & Biology Society. Chengdu, 2010: 3694-3697.
[12]POLOTTO A, MODULO F, FLUMIAN F, et al. Index Finger Rehabilitation/Assistive Device[C]// The Fourth IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics. Roma, 2012: 1518-1523.
[13]于美丽. 基于ADAMS外骨骼康复机械手的设计和仿真分析[D]. 青岛:青岛大学,2012:11-12.
YU Meili. The Design and Simulation of Exoskeleton Hand Rehabilitation Manipulator Based on ADAMS [D]. Qingdao: Qingdao University, 2012:11-12.
[14]贾先,赵升吨,范淑琴,等. 双动压力机用压边滑块串联四连杆工作机构的优化[J]. 中国机械工程, 2016, 27(9): 1223-1228.
JIA Xian, ZHAO Shengdun, FAN Shuqin, et al. Optimization of Pressure Side Slider Series Four-bar Linkage Working Mechanism Used by Double-action Press[J]. China Mechanical Engineering, 2016, 27(9): 1223-1228. |