Reliability Assessment of Safety-instrumented Systems Operated in High-demand Mode

Abstract

Abstract:

Currently, the research of reliability analysis of high-demand safety instrumented systems was rare. Considering the process demands, item failure modes, proof test strategy and maintenance, a Markov model of the 1oo2 voted group was developed for the reliability analysis. After that, the effects of demand and proof test strategy on the reliability of the voted group were explored, respectively. The results show that the reliability of the voted group decreases with the demand rate and the proof test frequency. The operating state of the group is dominantly verified by demands if the demand rate is larger than the proof test frequency, and by proof tests otherwise.

Key words: safety instrumented system, high-demand mode, Markov method, reliability

摘要：

针对高需求模式下，安全仪表系统的可靠性评估尚缺研究的现状，以1oo2冗余结构组为例，综合考虑过程需求、部件失效模式、验证测试策略和维修等因素，运用马尔可夫方法构建了结构组的可靠性分析模型，并分别对需求和测试策略对结构组可靠性的影响进行了研究。结果表明：结构组的可靠性随着需求频率及验证测试频率的增加而降低；当需求频率高于验证测试频率时，结构组的运行状态主要通过需求进行检测，反之，则通过验证测试进行检测。

关键词: 安全仪表系统, 高需求模式, 马尔可夫方法, 可靠性

CLC Number:

TP202

Wang Yukun, Liu Zixian. Reliability Assessment of Safety-instrumented Systems Operated in High-demand Mode[J]. China Mechanical Engineering, 2016, 27(01): 101-104,108.

王玉堃, 刘子先. 面向高需求模式的安全仪表系统可靠性评估[J]. 中国机械工程, 2016, 27(01): 101-104,108.

References

[1]International Electrotechnical Commission. IEC61508-2010. Functional Safety of Electrical/programmable Electronic Safety-related System[S]. Geneva：International Electrotechnical Commission，2010.
[2]Innal F. Contribution to Modelling Safety Instrumented Systems and to Assessing Their Performance Critical Analysis of IEC61508 Standard[D].Batna：University of Batna，2008.
[3]Lundteigen M A，Rausand M. Reliability Assessment of Safety Instrumented Systems in the Oil and Gas Industry：a Practical Approach and a Case Study[J]. International Journal of Reliability，Quality，and Safety Engineering，2009，16：187-212.
[4]Hui J，Lundteigen M A，Rausand M. Reliability Performance of Safety Instrumented Systems：a Common Approach for Both Low- and High-demand Mode of Operation[J]. Reliability Engineering and System Safety，2011，96：365-373.
[5]Rausand M. Risk Assessment：Theory，Methods，and Applications[M]. Hoboken：John Wiley & Sons，2011.
[6]Rausand M，Hoyland A. System Reliability Theory：Models，Statistical Methods，and Applications[M]. Hoboken：Jonhn Wiley & Sons，2004.
[7]Liu Y L，Rausand M. Reliability Assessment of Safety Instrumented Systems Subject to Different Demand Modes[J]. Reliability Engineering and System Safety，2011，24：49-56.
[8]Innal F，Dutuit Y，Rauzy A，et al. New Insight into the Average Probability of Failure on Demand and the Probability of Dangerous Failure Per Hour of Safety Instrumented Systems[J]. Journal of Risk and Reliability，2010，224：75-86.
[9]International Electrotechnical Commission. IEC62551-2012. Analysis Techniques for Dependability - Petri Net Techniques[S]. Geneva：International Electrotechnical Commission，2012.
[10]Liu Y L，Rausand M. Reliability Effects of Test Strategies on Safety-intrumented Systems in Different Demand Modes[J]. Reliability Engineering and System Safety，2013，119：235-243.
[11]Hokstad P，Corneliussen K. Loss of Safety Assessment and the IEC61508 Standard[J]. Reliability Engineering and System Safety，2004，83：111-120.
[12]Langeron Y，Barros A，Grall A，et al. Combination of Safety Integrity Levels(SILs)：A Study of IEC61508 Merging Rules[J]. Journal of Loss Prevention in the Process Industries，2008，21：437-449.
[13]Dutuit Y，Innal F，Rauze A，et al. Probabilistic Assessments in Relationship with Safety Integrity Levels by Using Fault Trees[J]. Reliability Engineering and System Safety，2008，93：1867-1876.
[14]Jin H，Lundteigen M A，Rausand M. New PFH-formulas for k-out-of-n：F Systems[J]. Reliability Engineering and System Safety，2013，111：112-118.

[1]	GAO Jin, CUI Haibing, FAN Tao, LI Ang, DU Zunfeng. A Structural Reliability Calculation Method Based on Adaptive Kriging Ensemble Model [J]. China Mechanical Engineering, 2024, 35(01): 83-92.
[2]	QU Xiaozhang, ZHANG Jiabei, ZHAI Fangzhi. Reliability-based Analysis for Two-phase Flow of Locomotive Side Wall Filtration Systems with Non-random Load Uncertainty [J]. China Mechanical Engineering, 2023, 34(15): 1881-1889.
[3]	WANG Xinyuan, ZHOU Jinyu, XIE Liyang, CHENG Jinxiang. Adaptive Subdivision-Importance Sampling Method for Solving Structural Reliability [J]. China Mechanical Engineering, 2023, 34(03): 300-306，313.
[4]	ZHAO Leilei, YU Yuewei, CAO Jianhu, GAO Shangpeng, ZHOU Changcheng, YUAN Jian. Characteristics Analysis and Parameters Matching of a Novel Seat with Quasi-zero-stiffness Nonlinear Suspension [J]. China Mechanical Engineering, 2023, 34(01): 36-46.
[5]	YU Hanlin, LUO Yabo. Dual Center Logistics Path Planning of Blending Workshops [J]. China Mechanical Engineering, 2022, 33(21): 2531-2537.
[6]	WANG Qiao, DU Xuesong, SONG Chaosheng, ZHU Caichao, SUN Jianquan, LIAO Delin. Research on Accelerated Life Test Method of Harmonic Reducers [J]. China Mechanical Engineering, 2022, 33(19): 2317-2324.
[7]	CHEN Dongning, HU Yanlong, YAO Chengyu, WANG Kuantong, MA Lei, . Multi-dimensional Dynamic Bayesian Network and Its Importance Measure Analysis Method [J]. China Mechanical Engineering, 2022, 33(19): 2340-2346.
[8]	YI Qian, LI Congbo, PAN Jian, ZHANG You. Reliability Analysis of Machining Accuracy and Processing Parameter Optimization for Thin-plate Parts [J]. China Mechanical Engineering, 2022, 33(11): 1269-1277.
[9]	ZHANG Zhonghua, CHAI Junling, KAN Junwu, LIN Shijie, WANG Shuyun, HUANG Leshuai. Modeling and Tests for Magnetically Coupled Piezoelectric Vibration Energy Harvesters Using a Single Magnet [J]. China Mechanical Engineering, 2021, 32(19): 2288-2293，2304.
[10]	CHEN Yifan, ZHANG Genbao, RAN Yan, LI Yulong, YU Hui, . Meta-action-oriented Reliability Allocation Method of Mechanical Transmission Systems [J]. China Mechanical Engineering, 2021, 32(17): 2032-2039.
[11]	ZHOU Jinyu, ZHU Dawei, WANG Zhiling. Reliability-based Design Optimization Strategy for Structures by Universal Generating Functions#br# [J]. China Mechanical Engineering, 2021, 32(12): 1442-1448.
[12]	ZHAO Lijuan, WANG Yadong , WANG Bin. Analysis and Prediction of Working Performance of Shearer Spiral Drums under Coal Seam with Gangue#br# [J]. China Mechanical Engineering, 2021, 32(08): 976-986.
[13]	WANG Kang, QI Jinping, ZHOU Yahui, LI Shaoxiong, ZHAO Ruihu, GUO Hao. Reliability Analysis of Train Control Center Based on Discrete-time Bayesian Network [J]. China Mechanical Engineering, 2021, 32(04): 390-398.
[14]	XIONG Lü , WANG Hong. Multi-level Imperfect Maintenance Strategy for EMU Components from Perspective of Failure Risks [J]. China Mechanical Engineering, 2021, 32(04): 399-406.
[15]	WU Jinhui1,2；TAO Yourui1,2. Review on Research Status of Positioning Accuracy Reliability of Industrial Robots [J]. China Mechanical Engineering, 2020, 31(18): 2180-2188.