Focusing Imaging of Cracks in Pipes Based on Torsional Modes

Abstract

Abstract:

Using ultrasonic guided wave technique, the crack detection of pipe was studied. Theoretically, characteristics of torsional modes were analyzed. Based on finite element simulation, affections of cracks with different lengths on T(0,1) mode were analyzed. In order to quantify the location and size of cracks, a synthetic focusing method was employed. Using this method, the recorded backscattered wave signals were focused at different locations (θ, z), and the imaging distribution I(θ, z) was developed. This imaging result reflects the size and location of crack clearly.

Key words: guided wave, torsional mode, focusing imaging, crack

摘要：

利用超声导波技术,对管道的裂纹检测进行了研究,理论分析了扭转模态的传播特点。基于有限元模拟,分析了不同尺寸裂纹对T(0,1)模态传播的影响。为检测管道中裂纹的位置和尺寸,引入了综合聚焦成像算法。利用该算法,将接收到的反射波在管道不同位置(θ, z)处聚焦成像,并建立管道的成像分布I(θ,z)。成像结果直观地反映了裂纹的位置和尺寸。


关键词: 导波, 扭转模态, 聚焦成像, 裂纹

CLC Number:

TB559
O347.4

TIAN Zhen-Hua, XU Hong, YANG Zhi-Lei. Focusing Imaging of Cracks in Pipes Based on Torsional Modes[J]. China Mechanical Engineering, 2013, 24(1): 85-89.

田振华, 徐鸿, 杨志磊. 基于扭转模态的管道裂纹聚焦成像[J]. 中国机械工程, 2013, 24(1): 85-89.

References

[1]Alleyne D N，Lowe M J S，Cawley P．The Reflection of Guided Waves from Circumferential Notches in Pipes[J]．Journal of Applied Mechanics，1998，65：635-641．
[2]邓菲，吴斌，何存富．基于时间翻转的管道导波缺陷参数辨识方法[J]．机械工程学报，2010，46(8)：18-24．
Deng Fei，Wu Bin，He Cunfu．Time Reversal Guided Wave Defect Identification Method[J]．Journal of Mechanical Engineering，2010，46(8)：18-24．
[3]何存富，刘增华，孙雅欣，等．基于超声导波技术对弯管中缺陷检测的实验研究[J]．中国机械工程，2005，16(18)：1662-1665．
He Cunfu，Liu Zenghua，Sun Yaxin，et al．Experimental Study on Defect Detection in Curved Pipes Using Ultrasonic Guided Waves Technique[J]．China Mechanical Engineering，2005，16(18)：1662-1665．
[4]刘增华，吴斌，王秀彦，等．扭转模态在带黏弹性包覆层管道中缺陷检测的实验研究[J]．中国机械工程，2009，20(5)：564-567．
Liu Zenghua，Wu Bin，Wang Xiuyan，et al．Experimental Study on Defect Detection in Pipes with Viscoelastic Coating Using Torsional Modes[J]．China Mechanical Engineering，2009，20(5)：564-567．
[5]Sun Z，Zhang L，Rose J L．Flexural Torsional Guided Wave Mechanics and Focusing in Pipe[J]．Journal of Pressure Vessel Technology，2005，127：471-478．
[6]Alleyne D N，Cawley P．Long Range Propagation of Lamb Waves in Chemical Plant Pipework[J]．Material Evaluation，1997，55：504-508．
[7]Cawley P，Lowe M J S，Simonetti F，et al．The Variation of the Reflection Coefficient of Extensional Guided Waves in Pipes from Defects as a Function of Defect Depth, Axial Extent, Circumferential Extent and Frequency[J]．Journal of Mechanical Engineering Science，2002，216：1131-1143．
[8]Alleyne D N，Pavlakovic B，Cawley P．Rapid Long Range Inspection of Chemical Plant Pipework Using Guided Waves[J]．Insight，2001，43：93-96．
[9]Demma A，Cawley P，Lowe M，et al．The Reflection of Fundamental Torsional Mode from Cracks and Notches in Pipes[J]．Journal of Acoustical Society of America，2003，114：611-625．

[1]	ZHANG Zhen, GUO Ce, HU Caiji, ZHENG Wei. Research on Self-repairing Structure Design and Repair Performance Based on Additive Manufacturing Technology [J]. China Mechanical Engineering, 2024, 35(01): 144-151.
[2]	GUO Wei, CAO Hongrui, ZI Yanyang, WEI Xunkai. Study on Contact Fatigue Crack Modeling and Propagation Law of Rolling Bearings [J]. China Mechanical Engineering, 2023, 34(16): 1891-1899.
[3]	ZHU Yulong, ZHAO Yingsong, FANG Yang, CHEN Hongen, CHEN Zhenmao, . Rotating Eddy Current Testing for Inspection of Cracks at Hole Edge [J]. China Mechanical Engineering, 2023, 34(08): 883-891.
[4]	XING Haiyan, ZHU Kongyang, ZHANG Po, LIU Chuan, DUAN Chengkai, LIU Weinan, LIU Chao. Characterization Model of Critical State of Crack Closure Based on Magnetic Property [J]. China Mechanical Engineering, 2023, 34(04): 414-420.
[5]	ZHANG Shuai, CHEN Zhaoqiang, XIAO Guangchun, YI Mingdong, ZHANG Jingjie, ZHOU Tingting, XU Chonghai. Study on Crack Repair Performance of Si3N4/TiC/ZrSi2 Ceramic Tool Materials [J]. China Mechanical Engineering, 2022, 33(19): 2288-2297.
[6]	MENG Zong, LI Jiasong, PAN Zuozhou, PANG Xiushen, CUI Lingli, FAN Fengjie. Influences of Crack Faults on TVMS of Gear Teeth [J]. China Mechanical Engineering, 2022, 33(16): 1897-1905，1911.
[7]	HU Futai, . Cracking Suppression and Lateral Bending Broadening Strategy of Fan-shaped Thin-wall Ribs during Extrusion [J]. China Mechanical Engineering, 2022, 33(14): 1734-1740.
[8]	DONG Longlong, YU Shurong, LI Shuxin, SONG Wei. Investigation of Fluid Filled Behaviour of Cracks under Rolling Contacts [J]. China Mechanical Engineering, 2022, 33(10): 1210-1218.
[9]	YAN Liang, WAN Benli, HU Bin, FAN Mengbao. Surface Crack Orientation Detection Method of Stainless Steels Based on Electromagnetic Field [J]. China Mechanical Engineering, 2022, 33(09): 1057-1064.
[10]	ZHOU Hai, ZHANG Jiequn, XU Yameng, SHEN Junzhou, HUANG Mengdie. Crack Nucleation Position and Propagation Direction of Single Abrasive Grain Scribing Gallium Oxide Crystal Surfaces [J]. China Mechanical Engineering, 2021, 32(16): 1945-1951.
[11]	GU Zhenhua, LI Ke, GU Jiefei, , SU Lei, SU Wensheng. Fatigue Crack Growth Prediction Based on NPF Algorithm [J]. China Mechanical Engineering, 2021, 32(14): 1709-1715.
[12]	JIANG Yunlu, YANG Liang, HAN Xiaohui, XU Ye, CHEN Huaining, CAI Guixi. Influences of Service Conditions on Fatigue Properties of Stainless Steel Spot Welding and Cracking Analysis [J]. China Mechanical Engineering, 2021, 32(14): 1726-1731.
[13]	XU Zhangjing, LIU Zhiping, DU Yong, WU Hao. Design of Ultrasonic Weak Impact Energy Guide Device and Infrared Thermal Image Detection#br# [J]. China Mechanical Engineering, 2021, 32(12): 1387-1394.
[14]	WU Yinglong, XUAN Haijun, SHAN Xiaoming, FU Rulong. Fatigue Crack Growth and Nondestructive Quantitative Characterization in Centrifugal Wheels [J]. China Mechanical Engineering, 2021, 32(06): 658-665.
[15]	ZHANG Kun, CHEN Dingfang, GAO Mingxin, HUANG Yongliang, LIU Yang, MEN Yanqing. A Detecting Method for Structure Crack Edges of Municipal Railway Tunnels under Supervised Learning [J]. China Mechanical Engineering, 2021, 32(04): 446-453.