A Detecting Method for Structure Crack Edges of Municipal Railway  Tunnels under Supervised Learning

doi:10.3969/j.issn.1004-132X.2021.04.009

Abstract

Abstract: Regular inspection of crack diseases was the key to ensure the normal operation of metro tunnel structures. To address this issue, a method for crack detection of metro tunnel structures under supervised learning was proposed herein. Firstly, the images of the metro tunnel structures were obtained by a consumer digital camera. Secondly, the geometric feature vectors of the edge targets were constructed based on the preliminary detection results by Canny operator, and then the crack edges of metro tunnel structures were detected by using the geometric feature vectors of edge targets. Finally, the effectiveness of the proposed method was verified by the image data of the metro tunnel structures.

Key words: municipal railway tunnel structure, crack detection, supervised learning, image processing, principal component analysis

摘要： 裂缝病害的定期巡检工作是保证市域铁路隧道结构正常运营的关键。针对市域铁路隧道结构表观裂缝的有效识别问题，提出了有监督学习下的市域铁路隧道结构裂缝边缘识别方法。首先，利用消费级数码相机获取了市域铁路隧道结构表观状态的图像数据；然后，基于Canny算子的初步边缘目标检测结果，构造了边缘目标的几何特征矢量，并在此基础上提出了基于几何特征数据的裂缝边缘识别方法；最后，采用实际市域铁路隧道结构的表观图像数据验证了所提出方法的有效性。

关键词: 市域铁路隧道结构, 裂缝识别, 监督学习, 图像处理, 主成分分析

CLC Number:

U231.92

ZHANG Kun, CHEN Dingfang, GAO Mingxin, HUANG Yongliang, LIU Yang, MEN Yanqing.

A Detecting Method for Structure Crack Edges of Municipal Railway Tunnels under Supervised Learning

[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2021.04.009.

张琨, 陈定方, 高铭鑫, 黄永亮, 刘洋, 门燕青. [车辆工程与测控]有监督学习下的市域铁路隧道结构裂缝边缘识别方法[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2021.04.009.

References

［1］王睿,漆泰岳,万宇,等.基于机器视觉的高铁隧道衬砌裂缝骨架拐点识别［J］.地下空间与工程学报,2020,16(2):524-530.

WANG Rui, QI Taiyue, WAN Yu,et al. Study on the Identification of Crack Skeleton Inflection Point Based on Machine Vision Detection［J］. Chinese Journal of Underground Space and Engineering,2020,16(2):524-530.

［2］王睿,漆泰岳.基于机器视觉检测的裂缝特征研究［J］.土木工程学报,2016,49(7):123-128.

WANG Rui, QI Taiyue. Study on Crack Characteristics Based on Machine Vision Detection［J］. China Civil Engineering Journal［J］. 2020,49(7):123-128.

［3］朱鑫,漆泰岳,王睿,等.一种改进的用于裂缝图像分割的Otsu方法［J］.地下空间与工程学报,2017,13(增刊1):80-84.

ZHU Xin, QI Taiyue, WANG Rui, et al. An Amproved Otsu Method for Image Segmentation of Cracks［J］. Chinese Journal of Underground Space and Engineering,2017,13(S1):80-84.

［4］王华夏,漆泰岳,王睿.高速铁路隧道衬砌裂缝自动化检测硬件系统研究［J］.铁道标准设计,2013(10):97-102.

WANG Huaxia, QI Taiyue, WANG Rui. Research on Hardware System for Automatic Detection of Tunnel Lining Crack on High-speed Railway［J］. Railway Standard Design, 2013(10):97-102.

［5］何国华,刘新根,陈莹莹,等.基于数字图像的隧道表观病害识别方法研究［J］.重庆交通大学学报(自然科学版),2019,38(3):21-26.

HE Guohua, LIU Xingen, CHEN Yingying, et al. Apparent Tunnel Diseases Identification Based on Digital Images［J］. Journal of Chongqing Jiaotong University (Natural Science),2019,38(3):21-26.

［6］HUANG D J , SUN Y , XUE Y D , et al. Inspection Equipment Study for Subway Tunnel Defects by Grey-scale Image Processing［J］. Advanced Engineering Informatics, 2017(32): 188-201.

［7］YU S N , JANG J H , HAN C S. Auto Inspection System Using a Mobile Robot for Detecting Concrete Cracks in a Tunnel［J］. Automation in Construction, 2007,16(3): 255-261.

［8］段瑞玲,李庆祥,李玉和.图像边缘检测方法研究综述［J］.光学技术,2005(3):415-419.

DUAN Ruiling, LI Qingxiang, LI Yuhe. Summary of Image Edge Detection［J］. Optical Technique,2005(3):415-419.

［9］王耀东,余祖俊,白彪,等.基于图像处理的地铁隧道裂缝识别算法研究［J］.仪器仪表学报,2014,35(7):1489-1496.

WANG Yaodong, YU Zhujun, BAI Biao, et al. Research on Image Processing Based Subway Tunnel Crack Identification Algorithm［J］. Chinese Journal of Scientific Instrument,2014,35(7):1489-1496.

［10］王平让,黄宏伟,薛亚东.基于图像局部网格特征的隧道衬砌裂缝自动识别［J］.岩石力学与工程学报,2012,31(5):991-999.

WANG Pingrang, HUANG Hongwei, XUE Yadong. Automatic Recognition of Crack in Tunnel Lining Based on Characteristic of Local Grids in Images［J］. Chinese Journal of Rock Mechanic and Engineering,2012,31(5):991-999.

［11］贾东峰,张伟平,刘燕萍.多尺度空间下的隧道裂缝与渗水区域检测［J］.同济大学学报(自然科学版),2019,47(12):1825-1830.

JIA Dongfeng, ZHANG Weiping, LIU Yanping. Tunnel Crack and Seepage Detection in Multiscale Space［J］. Journal of Tongji University(Nature Science),2019,47(12):1825-1830.

［12］周丽军,刘晓.基于分数阶傅里叶变换的隧道低对比度裂缝检测［J］.计算机科学,2019,46(增刊1):208-210.

ZHOU Lijun, LIU Xiao. Low-constrast Crack Detection Method Based on Fractional Fourier Transform［J］. Computer Science,2019,46(S1):208-210.

［13］CANNY J. A Computational Approach to Edge Detection［J］. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1986(6): 679-698.

［14］王植,贺赛先.一种基于Canny理论的自适应边缘检测方法［J］.中国图像图形学报,2004,9(8):958-962.

WANG Zhi, HE Saixian. An Adaptive Edge-detection Method Based on Canny Algorithm［J］. Journal of Image and Graphics,2004,9(8):958-962.

［15］徐港,赵恬悦,蒋赏,等.基于多种连通域特征的结构表面裂缝提取方法［J］.华中科技大学学报(自然科学版),2019,47(10):52-68.

XU Gang, ZHAO Tianyue, JIANG Shang,et al. Extraction Method of Structural Surface Cracks Based on Multiple Connected Domain Feature［J］. Journal of Huazhong University of Science & Technology(Natural Science Edition),2019,47(10):52-68.

［16］徐正光,鲍东来,张利欣.基于递归的二值图像连通域像素标记算法［J］.计算机工程,2006(24):186-188.

XU Zhengguang, BAO Donglai, ZHANG Lixin. Pixel Labeled Algorithm Based on Recursive Method of Connecting Are in Binary Images［J］. Computer Engineering,2006(24):186-188.

［17］甘玲,林小晶.基于连通域提取的车牌字符分割算法［J］.计算机仿真,2011,28(4):336-339.

GAN Ling, LIN Xiaojing. License Plate Character Segmentation Based on Connected Component Extraction［J］. Computer Simulation,28(4):336-339.

［18］SVANTE W ,KIM E, PAUL G. Principal Component Analysis［J］. Chemometrics and Intelligent Laboratory Systems, 1987(2): 37-52.

［19］李玉珍,王宜怀.主成分分析及算法［J］.苏州大学学报(自然科学版),2005，21(1):32-36.

LI Yuzhen, WANG Yihuai. Principal Component Analysis And Algorithm［J］. Journal of Suzhou University(Natural Science Edition),2005,21(1):32-52.

[1]	CHEN Huanguo, LIU Peijun, YU Hang, XIAO Xue. Identification of Fault Degree of Oil Filter Blockage in Electro-hydraulic Actuator Based on an Improved PCA-SOM [J]. China Mechanical Engineering, 2021, 32(07): 799-805.
[2]	ZHOU Youhang;MA Zhuxi;SHI Xuanwei;KONG Tuo. Defect Detection Method of Linear Guide Surfaces Based on HSI Color Space [J]. China Mechanical Engineering, 2019, 30(18): 2179-2184.
[3]	HAN Xiaoqin1,2;SONG Yongfeng1;LIU Yu1; LI Xiongbing1. A Surface Roughness Measurement Method Based on Ultrasonic Nondestructive Evaluations [J]. China Mechanical Engineering, 2019, 30(08): 883-889.
[4]	GE Liang, MIAO Rui, GE Qiuyuan, WU Yizhou. Feature Extraction and Defect Identification of Eddy Current Testing Signals on Narrow Lap Weld [J]. China Mechanical Engineering, 2019, 30(02): 225-229.
[5]	ZHANG Xugang, AO Xiuyi, ZHANG Hua, JIANG Zhigang, . Research on Remanufacturing Cost Prediction Model of Used Parts Considering Failure Features [J]. China Mechanical Engineering, 2018, 29(21): 2594-2599.
[6]	E Dongchen 1,2;ZHANG Lijie1,2 . Car Dumper Hydraulic System Fault Diagnosis Based on Multi-block MPCA [J]. China Mechanical Engineering, 2018, 29(08): 958-964.
[7]	ZENG Daxing;WANG Juanjuan;FAN Mingzhou;YUE Xiaobo;HOU Yulei. Parameter Optimization of Parallel Mechanisms Based on PCA [J]. China Mechanical Engineering, 2017, 28(24): 2899-2905.
[8]	GAO Jianping1;ZHANG Leimin1;SUN Zhongbo2;XI Jianguo1. Control Strategy Optimization of Plug-in Hybrid Electric Vehicle Based on Driving Cycles [J]. China Mechanical Engineering, 2017, 28(15): 1770-1777.
[9]	ZHAO Chunhua, WANG Chengkang, HUA Lu, ZHENG Siyu, LIANG Zhipeng. Control Chart Pattern Recognition Based on Fusion Feature Reduction and SVM [J]. China Mechanical Engineering, 2017, 28(08): 930-935.
[10]	ZHANG Quande, CHEN Guo, LIN Tong, OUYANG Wenli, TENG Chunyu, WANG Hongwei. Condition Assessment for Rolling Bearings Based on SOM [J]. China Mechanical Engineering, 2017, 28(05): 550-558.
[11]	Zhang Yufei, Yao Ziyun, Tang Songlin, Zhu Lina, Zhang Jinjie. An Engine Fault Diagnosis Method Based on PCL and SVM [J]. China Mechanical Engineering, 2016, 27(24): 3307-3311.
[12]	Yang Zhiguang, Zhang Yonglin, Xie Jingming, Chen Youping. Target Positioning of Pedestrian Based on Binocular Vision and Constraints [J]. China Mechanical Engineering, 2016, 27(23): 3171-3175.
[13]	Kong Ming, He Chuhong, Wang Yingjun, Huang Wei. Four-way Valve Automatic Brazing Positioning System Based on Machine Vision [J]. China Mechanical Engineering, 2016, 27(22): 3043-3047.
[14]	Gu Yingkui, Pan Gaoping, Zhu Fanlong, Cheng Zixin. Gearbox Fault Feature Reduction Based on Neighborhood Attribute Importance and PCA [J]. China Mechanical Engineering, 2016, 27(13): 1783-1789.
[15]	Hao Tengfei, Chen Guo. Fault Diagnosis of Rotating Machinery Based on Laplacian Support Vector Machines [J]. China Mechanical Engineering, 2016, 27(01): 73-78.