Optimum Plan of Reliability Evaluation of NC Machine Tools Based on Exponential Distribution

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (22): 2735-2738.

Previous Articles Next Articles

Optimum Plan of Reliability Evaluation of NC Machine Tools Based on Exponential Distribution

Dai Yi

Tianjin University of Technology and Education, Tianjin, 300222

Online:2011-11-25 Published:2011-12-12
Supported by:

National Natural Science Foundation of China（No. 50875186）;
National Science and Technology Major Project ( No. 2009ZX04014-013)

基于指数分布的数控机床可靠性评估优化方案

戴怡

天津职业技术师范大学，天津，300222

基金资助:
国家自然科学基金资助项目(50875186)；国家科技重大专项(2009ZX04014-013)
National Natural Science Foundation of China（No. 50875186）;
National Science and Technology Major Project ( No. 2009ZX04014-013)

Abstract

Abstract:

A reliability evaluation test plan of NC machine tools based on exponent distribution was investigated. At first the evaluation test plan type was confirmed as timing censored lifetime test with replacement, secondly the minimum failure number was discussed to get certain confidence interval, and then the condition that the product of machine tool number and censored time should satisfied was analyzed to get the minimum failure number.At last, the optimum plan about machine tool number and censored time were put forward. 

Key words: NC machine tool, reliability, evaluation;timing censored lifetime test with replacement

摘要：

研究了基于指数分布的数控机床可靠性评估试验方案。首先确定评估试验方案类型为有替换定时截尾试验，然后研究了为达到一定的置信区间所需要的最小失效数，并研究了试验机床数量与截尾时间乘积应满足的条件，以便获得最小失效数。最后，对最小截尾试验时间进行研究，给出了试验机床数量与截尾时间的优化方案。

关键词:

数控机床, 可靠性, 评估, 有替换定时截尾试验

CLC Number:

TG659

DAI Yi.

Optimum Plan of Reliability Evaluation of NC Machine Tools Based on Exponential Distribution

[J]. China Mechanical Engineering, 2011, 22(22): 2735-2738.

戴怡.

基于指数分布的数控机床可靠性评估优化方案

[J]. 中国机械工程, 2011, 22(22): 2735-2738.

[1]	GAO Jin, CUI Haibing, FAN Tao, LI Ang, DU Zunfeng. A Structural Reliability Calculation Method Based on Adaptive Kriging Ensemble Model [J]. China Mechanical Engineering, 2024, 35(01): 83-92.
[2]	QU Xiaozhang, ZHANG Jiabei, ZHAI Fangzhi. Reliability-based Analysis for Two-phase Flow of Locomotive Side Wall Filtration Systems with Non-random Load Uncertainty [J]. China Mechanical Engineering, 2023, 34(15): 1881-1889.
[3]	WANG Xinyuan, ZHOU Jinyu, XIE Liyang, CHENG Jinxiang. Adaptive Subdivision-Importance Sampling Method for Solving Structural Reliability [J]. China Mechanical Engineering, 2023, 34(03): 300-306，313.
[4]	ZHAO Leilei, YU Yuewei, CAO Jianhu, GAO Shangpeng, ZHOU Changcheng, YUAN Jian. Characteristics Analysis and Parameters Matching of a Novel Seat with Quasi-zero-stiffness Nonlinear Suspension [J]. China Mechanical Engineering, 2023, 34(01): 36-46.
[5]	YU Hanlin, LUO Yabo. Dual Center Logistics Path Planning of Blending Workshops [J]. China Mechanical Engineering, 2022, 33(21): 2531-2537.
[6]	WANG Qiao, DU Xuesong, SONG Chaosheng, ZHU Caichao, SUN Jianquan, LIAO Delin. Research on Accelerated Life Test Method of Harmonic Reducers [J]. China Mechanical Engineering, 2022, 33(19): 2317-2324.
[7]	CHEN Dongning, HU Yanlong, YAO Chengyu, WANG Kuantong, MA Lei, . Multi-dimensional Dynamic Bayesian Network and Its Importance Measure Analysis Method [J]. China Mechanical Engineering, 2022, 33(19): 2340-2346.
[8]	YI Qian, LI Congbo, PAN Jian, ZHANG You. Reliability Analysis of Machining Accuracy and Processing Parameter Optimization for Thin-plate Parts [J]. China Mechanical Engineering, 2022, 33(11): 1269-1277.
[9]	ZHANG Zhonghua, CHAI Junling, KAN Junwu, LIN Shijie, WANG Shuyun, HUANG Leshuai. Modeling and Tests for Magnetically Coupled Piezoelectric Vibration Energy Harvesters Using a Single Magnet [J]. China Mechanical Engineering, 2021, 32(19): 2288-2293，2304.
[10]	CHEN Yifan, ZHANG Genbao, RAN Yan, LI Yulong, YU Hui, . Meta-action-oriented Reliability Allocation Method of Mechanical Transmission Systems [J]. China Mechanical Engineering, 2021, 32(17): 2032-2039.
[11]	ZHOU Jinyu, ZHU Dawei, WANG Zhiling. Reliability-based Design Optimization Strategy for Structures by Universal Generating Functions#br# [J]. China Mechanical Engineering, 2021, 32(12): 1442-1448.
[12]	ZHAO Lijuan, WANG Yadong , WANG Bin. Analysis and Prediction of Working Performance of Shearer Spiral Drums under Coal Seam with Gangue#br# [J]. China Mechanical Engineering, 2021, 32(08): 976-986.
[13]	WANG Kang, QI Jinping, ZHOU Yahui, LI Shaoxiong, ZHAO Ruihu, GUO Hao. Reliability Analysis of Train Control Center Based on Discrete-time Bayesian Network [J]. China Mechanical Engineering, 2021, 32(04): 390-398.
[14]	XIONG Lü , WANG Hong. Multi-level Imperfect Maintenance Strategy for EMU Components from Perspective of Failure Risks [J]. China Mechanical Engineering, 2021, 32(04): 399-406.
[15]	WU Jinhui1,2；TAO Yourui1,2. Review on Research Status of Positioning Accuracy Reliability of Industrial Robots [J]. China Mechanical Engineering, 2020, 31(18): 2180-2188.

Optimum Plan of Reliability Evaluation of NC Machine Tools Based on Exponential Distribution

基于指数分布的数控机床可靠性评估优化方案

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics