Evaluation of Motorcycle Ride Comfort Based on Speed and Frequency Weighting

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (11): 1362-1365.

Previous Articles Next Articles

Evaluation of Motorcycle Ride Comfort Based on Speed and Frequency Weighting

Zou Xihong;Shi Xiaohui;Shi Quan;Hao Jianjun

Key Laboratory of Manufacture and Test Techniques for Automobile Parts, Ministry of Education,

Chongqing University of Technology, Chongqing, 400050

Online:2011-06-10 Published:2011-06-17
Supported by:

Key Technology R&D Program of Chongqing（No. 2007AA6006）

基于速度与频率加权的摩托车舒适性评价

邹喜红;石晓辉;施全;郝建军

重庆理工大学汽车零部件制造及检测技术教育部重点实验室，重庆，400050

基金资助:
重庆市科技攻关计划资助项目(2007AA6006)；汽车零部件制造及检测技术教育部重点实验室开放基金资助项目(2010KLMT05)
Key Technology R&D Program of Chongqing（No. 2007AA6006）

Abstract

Abstract:

A relation between motorcycle response and speed was analyzed herein, then through lots of tests, the statistic distributions of speed when motorcycle ran on gravel and concrete road were developed. And a new evaluation method of motorcycle ride comfort based on speed and frequency weighting was put forward, and the ride comfort of selected 125 motorcycle was tested and evaluated. The results show that speed and frequency weighting RMS of acceleration is the synthetically reflection to frequency weighting RMS of acceleration at different speeds, which has universality and practical value.

Key words: motorcycle ride comfort, speed, frequency, weighting, evaluation

摘要：

考虑轮距滤波的情况下，分析了摩托车振动响应与车速之间的关系，并通过大量试验找出了摩托车在碎石路和水泥路上行驶时车速的统计规律。在此基础上，提出了基于速度与频率加权的摩托车舒适性客观评价方法，并对某125摩托车进行了舒适性试验和评价。结果表明，速度和频率加权加速度均方根值是各种车速下频率加权加速度均方根值的综合反映，具有较强的通用性和实用价值。

关键词:

摩托车舒适性, 速度, 频率, 加权, 评价

CLC Number:

U483

JU Chi-Gong, DAN Xiao-Hui, SHI Quan, HAO Jian-Jun.

Evaluation of Motorcycle Ride Comfort Based on Speed and Frequency Weighting

[J]. China Mechanical Engineering, 2011, 22(11): 1362-1365.

邹喜红, 石晓辉, 施全, 郝建军.

基于速度与频率加权的摩托车舒适性评价

[J]. 中国机械工程, 2011, 22(11): 1362-1365.

[1]	ZHANG Min-Jie, WANG Qiang-Jiu, GUAN Cheng. Simulation Research of Parallel Hydraulic Hybrid Excavator [J]. J4, 201016, 21(16): 1932-1936.
[2]	LUO Ji-Sai, XU De-Ge, SHI Mei-Li. Gearbox Fault Diagnosis with Rotating Speed Fluctuation Based on SVD and Chirplet Path Pursuit Algorithm [J]. J4, 201016, 21(16): 1947-1951.
[3]	HAO Yaodong, GU Cansong, ZHOU Huanyang, DONG Junhong, LI Hongliang, DENG Jianghua. Stochastic Statistical Energy Method for High-frequency Analysis of Uncertain Acoustic-Structural Coupling Model#br# [J]. China Mechanical Engineering, 2021, 32(08): 921-929.
[4]	NI Hengxin, YAN Chunping, CHEN Jianlin, HOU Yuehui, CHEN Liang. Multi-objective Optimization and Decision-making Method of High Speed Dry Gear Hobbing Processing Parameters [J]. China Mechanical Engineering, 2021, 32(07): 832-838.
[5]	ZHANG Yinxia1;YANG Xin1;YUAN Shaoshuai1;ZHU Jianhui2;WANG Dong1. Residual Stress of High Speed Cylindrical Grinding of 18CrNiMo7-6 Steel [J]. China Mechanical Engineering, 2021, 32(05): 540-546.
[6]	ZONG Bin, LIU Feixiang, ZHANG Kun, ZHANG Yinlong. Intelligent Maintenance Technology and Equipment for Medium-low Speed Maglev Lines [J]. China Mechanical Engineering, 2021, 32(04): 407-411.
[7]	WANG Zhiqiang, , LEI Zhenyu, . Study on Influence Parameters of Rail Corrugation on Tangential Tracks of Metro [J]. China Mechanical Engineering, 2021, 32(04): 420-430.
[8]	ZHANG Yinlong. Key Technologies of Smart Platform Door Systems of Urban Railways [J]. China Mechanical Engineering, 2021, 32(04): 475-480.
[9]	ZHANG Jing, CHENG Feifei, SONG Baolin, LIU Zhigang, ZHANG Weihua. Multidisciplinary Design Optimization of High-speed Pantograph Based on Collaborative Optimization Algorithm [J]. China Mechanical Engineering, 2021, 32(04): 490-498.
[10]	WANG Rui1；JIA Qian1，2；YUAN Xiaoyang1. Quantitative Research of Take-off Speeds and Wear of Graphite Water-lubricated Hydrodynamic Thrust Bearings [J]. China Mechanical Engineering, 2021, 32(03): 269-274.
[11]	LI Congbo;ZHANG Chi;QU Shiyang;HU Zengming. Comprehensive Gear Shift Schedule of PELV Considering Road Gradients and Vehicle Loads [J]. China Mechanical Engineering, 2021, 32(03): 275-283,289.
[12]	BAI Xiaofan;HOU Shujun;LI Kai;QU Yunxia. Drilling Forces and Temperature Rises in Axial Low-frequency Vibration-assisted Cortical Bone Drilling [J]. China Mechanical Engineering, 2021, 32(03): 321-330.
[13]	ZHANG Lei1;LIU Wujun3;XIE Shejuan1,4;WANG Xiaogang2;KONG Yuying2;MA Qiang2;CHEN Zhenmao1. Swept-frequency ET and Innovative Feature Extraction of Abrasion Defects for Thimble Tubes in Nuclear Power Plants [J]. China Mechanical Engineering, 2021, 32(01): 18-25.
[14]	ZHAO Ting;XIAO Jiming;FAN Simin;YANG Zhenchao;YANG Fujie. Study on Chip Shapes and Drilling Forces of Low Frequency Vibration Drilling of TC4 Titanium Alloy [J]. China Mechanical Engineering, 2020, 31(19): 2276-2282.
[15]	LI Qiang;GUO Chenguang;ZHAO Lijuan;LENG Yuefeng;YUE Haitao. Research on High-speed Milling Transition Criteria and Chip Edge Formation Mechanism of DD5 Ni-based Single Crystal Superalloys [J]. China Mechanical Engineering, 2020, 31(19): 2388-2393.

Evaluation of Motorcycle Ride Comfort Based on Speed and Frequency Weighting

基于速度与频率加权的摩托车舒适性评价

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics