ZHANG Lifeng, ZHANG Xiaoguang. Machining Performance and Material Removal Mechanism of High-speed Milling of CFRP with Variable Angle under Minimal Quantity Lubrication[J]. China Mechanical Engineering, 2023, 34(21): 2622-2628.
[1]陈正文, 阮晓峰, 邹佳林, 等. 磨料水射流切割碳纤维复合材料的表面粗糙度试验[J]. 中国机械工程, 2019, 30(11):1315-1321.
CHEN Zhengwen, RUAN Xiaofeng, ZOU Jialin, et al. Surface Roughness Tests of CFRP Cutting by AWJ[J]. China Mechanical Engineering, 2019, 30(11):1315-1321.
[2]郑志龙, 赵玉刚, 刘谦, 等. 碳纤维增强复合材料水导激光加工实验研究[J]. 中国机械工程, 2023, 34(3):344-351.
ZHENG Zhilong, ZHAO Yugang, LIU Qian, et al. Experimental Study on Water Jet Guided Laser Processing of CFRPs[J]. China Mechanical Engineering, 2023, 34(3):344-351.
[3]ZHANG B Y, LI Y, WANG F J, et al. Machining Inclination Selection Method for Surface Milling of CFRP Workpieces with Low Cutting-induced Damage[J]. Composite Structures, 2023, 304:116495.
[4]逄显娟, 岳世伟, 黄素玲, 等. 碳纤维/聚醚醚酮(CF/PEEK)复合材料摩擦磨损性能及抗摩擦静电特性研究[J]. 中国机械工程, 2023, 34(3):277-286.
PANG Xianjuan, YUE Shiwei, HUANG Suling, et al. Tribological Properties and Anti Friction Electrostatic Properties of CF/PEEK Composites[J]. China Mechanical Engineering, 2023, 34(3):277-286.
[5]ZHENG H, ZHANG W J, LI B W, et al. Recent Advances of Interphases in Carbon Fiber-reinforced Polymer Composites:a Review[J]. Composites Part B:Engineering, 2022, 233:109639.
[6]陈沛哲. PCD直刃铣刀侧铣CFRP的刀具磨损规律研究[D]. 大连:大连理工大学, 2022.
CHEN Peizhe. Research on Tool Wear of PCD Straight Edge Milling Cutter in Side Milling of CFRP[D]. Dalian:Dalian University of Technology, 2022.
[7]ZHANG L F, WANG S, QIAO W L, et al. High-speed Milling of CFRP Composites:a Progressive Damage Model of Cutting Force[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106(3/4):1005-1015.
[8]王泽刚, 王福吉, 卢晓红, 等. 考虑左旋切削刃切削连续性的碳纤维增强树脂基复合材料铣削研究[J]. 中国机械工程, 2020, 31(8):991-996.
WANG Zegang, WANG Fuji, LU Xiaohong, et al. Research on CFRP Milling Considering Continuity of Left-handed Cutting Edges[J]. China Mechanical Engineering, 2020, 31(8):991-996.
[9]汪建新, 吴耀文, 张广义, 等. 碳纤维增强复合材料水导激光切割试验研究[J]. 中国机械工程, 2021, 32(13):1608-1616.
WANG Jianxin, WU Yaowen, ZHANG Guangyi, et al. Experimental Research of CFRP Cutting by Using Water Jet Guided Laser Processing[J]. China Mechanical Engineering, 2021, 32(13):1608-1616.
[10]张立峰, 王盛, 李战, 等. 纤维方向对单向C/SiC复合材料磨削加工性能的影响[J]. 中国机械工程, 2020, 31(3):373-377.
ZHANG Lifeng, WANG Sheng, LI Zhan, et al. Effects of Fiber Direction on Grinding Performances for Unidirectional C/SiC Composite[J]. China Mechanical Engineering, 2020, 31(3):373-377.
[11]武卫洲, 刘雪峰, 崔鑫, 等. 基于细观模型的刃口半径对CFRP铣削过程影响[J]. 航空制造技术, 2022, 65(22):60-67.
WU Weizhou, LIU Xuefeng, CUI Xin, et al. Influence of Cutting Edge Radius on CFRP Milling Process Based on Microsimulation[J]. Aeronautical Manufacturing Technology, 2022, 65(22):60-67.
[12]CAI C Y, DANG J Q, AN Q L, et al. Surface Morphology Characterization of Unidirectional Carbon Fiber Reinforced Plastic Machined by Peripheral Milling[J]. Chinese Journal of Aeronautics, 2022, 35(2):361-375.
[13]BI G J, WANG F J, FU R, et al. Wear Characteristics of Multi-tooth Milling Cutter in Milling CFRP and Its Impact on Machining Performance[J]. Journal of Manufacturing Processes, 2022, 81:580-593.
[14]ZOU F, DANG J Q, WANG X F, et al. Performance and Mechanism Evaluation during Milling of CFRP Laminates under Cryogenic-based Conditions[J]. Composite Structures, 2021, 277:114578.
[15]LIU C L, REN J X, SHI K N, et al. Investigation of Fracture Mechanism Evolution Model for UD-CFRP and MD-CFRP during the Milling Process[J]. Composite Structures, 2023, 306:116585.
[16]SONG Y, CAO H J, QU D, et al. Surface Integrity Optimization of High Speed Dry Milling UD-CF/PEEK Based on Specific Cutting Energy Distribution Mechanisms Effected by Impact and Size Effect[J]. Journal of Manufacturing Processes, 2022, 79:731-744.
[17]郑华林, 王贵鑫, 宁海峰, 等. 基于有限元CFRP多次铣削过程中面下损伤研究[J]. 航空制造技术, 2022, 65(5):36-42.
ZHENG Hualin, WANG Guixin, NING Haifeng, et al. Subsurface Damage Research of CFRP Multiple Milling Process Based on FEM Simulation[J]. Aeronautical Manufacturing Technology, 2022, 65(5):36-42.
[18]SHEIKH-AHMAD J, HE Yanli, QIN Lei. Cutting Force Prediction in Milling CFRPs with Complex Cutter Geometries[J]. Journal of Manufacturing Processes, 2019, 45:720-731.