Operating Mechanism and Data Driven Approach for Fault Alarm of Wind Turbine Gearbox Systems

doi:10.3969/j.issn.1004-132X.2023.12.010

Abstract

Abstract: Traditional machine learning methods were used in fault early warning of wind turbine gearboxes, the models were usually designed only by studying the relationship between data and faults, and the selection of parameters and model structure were lack of physical basis, resulting in poor interpretability and weak generalization capabilities of the models. The structure and actual operation control mode of the wind turbine gearbox were studied, the relationship between the operation mechanism and the data of corresponding supervisory control and data acquisition system was analyzed, and the operation data change trend was given qualitatively followed by deterioration of the typical gearbox faults. Finally, a series of one-class support vector machine(OCSVM) based models were constructed according to change law of the data distribution to realize the early fault warning of the wind turbines gearbox systems. Experimentsal results show that all of the proposed models may locate the fault positions of the wind turbine gearbox systems, which has clear physical significance.

Key words: wind turbine, failure analysis, fault diagnosis, fault detection, operating mechanism analysis

摘要： 传统基于机器学习的风电齿轮箱故障预警模型往往仅从数据着手分析数据与故障的映射关系，在参数和模型结构选择上缺少物理依据，导致模型的可解释性和泛化能力不强。从风电齿轮箱的结构和实际运行控制方式出发，分析了运行机理与对应的数据采集与监视控制系统数据的关系，定性地给出了齿轮箱典型故障发生时运行数据的变化趋势，然后根据数据分布变化规律选择参数和模型，建立了一系列基于单分类支持向量机的风电齿轮箱系统故障预警模型。实验结果显示各模型能够准确定位风电齿轮箱系统故障，具有清晰的物理意义。

关键词: 风力发电机, 故障分析, 故障诊断, 故障检测, 运行机理分析

CLC Number:

TK83

MENG Kang, TENG Wei, PENG Dikang, XIANG Ling, LIU Yibing. Operating Mechanism and Data Driven Approach for Fault Alarm of Wind Turbine Gearbox Systems[J]. China Mechanical Engineering, 2023, 34(12): 1476-1485.

蒙康, 滕伟, 彭迪康, 向玲, 柳亦兵. 运行机理与数据双驱动的风电齿轮箱系统故障预警[J]. 中国机械工程, 2023, 34(12): 1476-1485.

References

［1］国家能源局. 《新时代的中国能源发展》白皮书［EB/OL］. ［2020-12-21］. http:∥www.scio.gov.cn/m/zfbps/32832/Document/1695117/1695117.htm.
National Energy Administration， White Paper on Chinas Energy Development in the New Era［EB/OL］. ［2020-12-21］.http:∥www.scio.gov.cn/m/zfbps/32832/Document/1695117/1695117.htm.
［2］陈雪峰，郭艳婕，许才彬，等. 风电装备故障诊断与健康监测研究综述［J］.中国机械工程， 2020，31（2）： 175-189.
CHEN Xuefeng， GUO Yanjie， XU Caibin， et al.Review of Fault Diagnosis and Health Monitoring of Wind Power Equipment［J］. China Mechanical Engineering， 2020， 31（2）：175-189.
［3］王桂松，郭鹏，胥佳，等. 基于XGBoost建模和Change-Point残差处理的风电机组齿轮箱温度预警［J］. 电力科学与工程， 2018， 34（9）： 46-53.
WANG Guisong， GUO Peng， XU Jia， et al. Temperature Warning of Wind Turbines Gearbox Based on XGboost Modeling and Change-Point Residual Processing［J］. Electric Power Science and Engineering， 2018， 34（9）： 46-53.
［4］符杨，周全，贾锋，等. 基于SCADA数据图形化的海上风电机组故障预测［J］. 中国电机工程学报， 2022，42（20）：7465-7475.
FU Yang， ZHOU Quan， JIA Feng， et al. Fault Prediction of Offshore Wind Turbines Based on Graphical Processing of SCAD Data［J］. Proceedings of the CSEE， 2022， 42（20）：7465-7475.
［5］SU Xiangjing， SHAN Yanhao， LI Chaojie， et al. Spatial-temporal Attention and GRU Based Interpretable Condition Monitoring of Offshore Wind Turbine Gearboxes［J］. IET Renewable Power Generation， 2022， 16： 402-415.
［6］XIANG Ling， YANG Xin， HU Aijun， et al. Condition Monitoring and Anomaly Detection of Wind Turbine Based on Cascaded and Bidirectional Deep Learning Networks［J］. Applied Energy， 2022， 305：117925.
［7］PANG Yanhua， HE Qun， JIANG Guoqian， et al. Spatio-temporal Fusion Neural Network for Multi-class Fault Diagnosis of Wind Turbines Based on SCADA Data［J］. Renewable Energy， 2020， 161： 510-524.
［8］SZEGEDY C， LIU W， JIA Y Q， SERMANET P， et al. Going Deeper with Convolutions［C］∥Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition. Boston， 2015：15523970.
［9］景彤梅，齐咏生，刘利强，等. 基于KECA-GRNN的风电机组齿轮箱状态监测与健康评估［J］. 太阳能学报， 2021， 42（6）： 400-408.
JIN Tongmei， QI Yongsheng， LIU Liqiang， et al. Condition Monitoring and Health Assessment of Wind Turbine Gearboxes Based on KECA-GRNN［J］. Acta Energiae Solaris Sinica， 2021， 42（6）： 400-408.
［10］齐咏生，景彤梅，高学金，等. 基于多维度SCADA参数的风电机组异常辨识［J］. 控制工程， 2021， 28（12）： 2393-2401.
QI Yongsheng， JING Tongmei, GAO Xuejin， et al. Wind Turbine Anomaly Identification Based on Multi-dimensional SCADA Parameters［J］. Control Engineering of China， 2021， 28（12）： 2393-2401.
［11］王炜超，袁逸萍，孙文磊，等. 融合SCADA数据的风电机组齿轮箱状态评估［J］. 机械科学与技术， 2020， 39（2）： 201-206.
WANG Weichao， YUAN Yiping， SUN Wenlei， et al. Evaluation of Wind Turbine Gearbox State with Fusion of SCADA Data［J］. Mechanical Science and Technology for Aerospace Engineering， 2020， 39（2）： 201-206.
［12］CHEN Longting， XU Guanghua， ZHANG Qing， et al. Learning Deep Representation of Imbalanced SCADA Data for Fault Detection of Wind Turbines［J］. Measurement， 2019， 139： 370-379.
［13］李东东，刘宇航，赵阳，等. 基于改进生成对抗网络的风机行星齿轮箱故障诊断方法［J］. 中国电机工程学报， 2021， 41（21）：7496-7507.
LI Dongdong， LIU Yuhang， ZHAO Yang， et al. Fault Diagnosis Method of Fan Planetary Gearbox Based on Improved Generative Adversarial Network［J］. Proceedings of the CSEE， 41（21）：7496-7507.
［14］靳志杰，霍志红，许昌，等. 基于特征选择和XGBoost的风电机组故障诊断［J］. 可再生能源， 2021， 39（3）： 353-358.
JIN Zhijie， HUO Zhihong， XU Chang， et al. Fault Diagnosis of Wind Turbine Based on Random Forest and XGBoost［J］. Renewable Energy Resources， 2021， 39（3）：353-358.
［15］TENG Wei， CHENG Hao， DING Xian， et al. DNN-based Approach for Fault Detection in a Direct Drive Wind Turbine［J］. IET Renewable Power Generation， 2018, 12（10）： 1164-1171.
［16］SCHLKOPF B， WILLIAMSON R， SMOLA A et al. Support Vector Method for Novelty Detection［C］∥ Proceedings of the 12th International Conference on Neural Information Processing Systems. Denver， 1999:582-588.
［17］金晓航，泮恒拓，徐正国. 数据驱动的风电机组变桨系统状态监测［J］. 太阳能学报， 2022,43(4)：409-417.
JIN Xiaohang， PAN Hengtuo， XU Zhengguo. Condition Monitoring of Wind Turbine Pitch System Using Data-driven Approach［J］. Acta Energiae Solaris Sinica， 2022,43(4)：409-417.
［18］戴巨川，曹俊伟，张帆，等.风电场SCADA数据预处理方法及评价策略［J］. 太阳能学报， 2017， 38（9）：2597-2604.
DAI Juchuan， CAO Junwei， ZHANG Fan， et al. Data Pre-processing Method and Its Evaluation Strategy of SCADA Data from Wind Farm［J］. Acta Energiae Solaris Sinica， 2017， 38（9）：2597-2604.
［19］LUCAS J M， SACCUCCI M S. Exponentially Weighted Moving Average Control Schemes： Properties and Enhancements［J］. Technometrics， 1990， 32（1）： 1-12.
［20］Industrial Services. Part 1： Guideline for the Certification of Wind Turbines. Chapter 5： Strength Analyses： GL IV-1-5-2003［M］.Hamburg：Germanischer Lloyd Wind Engrgie GmbH, 2003.

[1]	LUO Ji-Sai, XU De-Ge, SHI Mei-Li. Gearbox Fault Diagnosis with Rotating Speed Fluctuation Based on SVD and Chirplet Path Pursuit Algorithm [J]. J4, 201016, 21(16): 1947-1951.
[2]	HE Qingchuan, LIU Hui, PAN Jun, CHEN Wenhua. Detecting Internal Leakage in Electro-Hydraulic Actuators Based on Operational States of Motor [J]. China Mechanical Engineering, 2023, 34(12): 1407-1414.
[3]	ZHENG Jinde, CHEN Yan, TONG Jinyu, PAN Haiyang. RGCMvMRDE and Its Applications in Rolling Bearing Fault Diagnosis [J]. China Mechanical Engineering, 2023, 34(11): 1315-1325.
[4]	ZHANG Long, HU Yanqing, ZHAO Lijuan, ZHANG Hao. Multichannel Information Fusion and Deep Transfer Learning for Rotating Machinery Fault Diagnosis [J]. China Mechanical Engineering, 2023, 34(08): 966-975.
[5]	ZHANG Long, ZHANG Hao, WANG Chaobing, WANG Xiaobo, WEN Peitian, ZHAO Lijuan. Explicit Dynamics Driving Fault Diagnosis Method for Bearing Variable Conditions [J]. China Mechanical Engineering, 2023, 34(08): 982-992.
[6]	DONG Shaojiang, ZHU Peng, ZHU Sunke, LIU Lanhui, XING Bin, HU Xiaolin. Fault Diagnosis Method of Rolling Bearings Based on Simulation Data Drive and Domain Adaptation [J]. China Mechanical Engineering, 2023, 34(06): 694-702.
[7]	WANG Xuan, MA Ruiyun, ZHOU Chunping. Progressive Failure Mechanism of Scarf Repaired in Honeycomb Sandwich Structures with Plain Weave Panels under Edgewise Compression [J]. China Mechanical Engineering, 2023, 34(06): 727-738.
[8]	LI Dongyang, YUAN Dongfeng, ZHANG Haixia, ZHENG Anzhu, DI Zijun, LIANG Daojun, . Research on Intelligent Tool Fault Diagnosis System of Machine Tools with Cloud-Edge-Device Collaboration [J]. China Mechanical Engineering, 2023, 34(05): 584-594.
[9]	ZHAO Jing, YANG Shaopu, LI Qiang, LIU Yongqiang, . A New Transfer Learning Method with Residual Attention and Its Applications on Rolling Bearing Fault Diagnosis [J]. China Mechanical Engineering, 2023, 34(03): 332-343.
[10]	ZHAO Yike, WANG Jiaxu, ZHANG Xin, WU Lei, LIU Zhiwen. Aero-engine Fault Diagnosis Based on an Enhanced Minimum Entropy Deconvolution [J]. China Mechanical Engineering, 2023, 34(02): 193-200.
[11]	LI Ke, , YAN Han, GU Jiefei, , SU Lei, SU Wensheng, XUE Zhigang. Research on Multi-source Transfer Learning Bearing Fault Diagnosis Based on Shapelets Time Series [J]. China Mechanical Engineering, 2022, 33(24): 2990-2996,3006.
[12]	LIU Zhihui, CAI Wei, FU Xingwei, YUAN Bingbing, WANG Hongguang, SONG Yifeng, . Failure Analysis of a Rolling Sealed Wall Climbing Robots [J]. China Mechanical Engineering, 2022, 33(22): 2755-2763,2771.
[13]	GUO Wei, XING Xiaosong. Intelligent Fault Diagnosis of Bearings with Few Samples Based on an Improved Convolutional Generative Adversarial Network [J]. China Mechanical Engineering, 2022, 33(19): 2347-2355.
[14]	WU Lei, WANG Jiaxu, ZHANG Xin, LIU Zhiwen. Blind Deconvolution Based on Reweighted-kurtosis Maximization for Wind Turbine Fault Diagnosis [J]. China Mechanical Engineering, 2022, 33(19): 2356-2363.
[15]	WEN Jiangtao, ZHANG Pengcheng, SUN Jiedi, LEI Ming. Unsupervised Transfer Learning with Residual Convolutional Autoencoder Networks for Bearing Fault Diagnosis [J]. China Mechanical Engineering, 2022, 33(14): 1707-1716.