China Mechanical Engineering ›› 2022, Vol. 33 ›› Issue (22): 2664-2672,2683.DOI: 10.3969/j.issn.1004-132X.2022.22.003

Previous Articles     Next Articles

Effects of Wheel Tread Out-of-roundness on Wheel-rail Interface Adhesions and Wheel Surface Damages of High-speed Trains#br#

SHEN Mingxue1,2,3;RONG Bin2;LI Shengxin2;ZHAO Huoping1,2;JI Dehui2;XIONG Guangyao2   

  1. 1.Key Laboratory of Conveyance and Equipment,Ministry of Education,East China Jiaotong University,Nanchang,330013
    2.School of Material Science and Engineering,East China Jiaotong University,Nanchang,330013
    3.Traction Power State Key Laboratory, Southwest Jiaotong University,Chengdu,610031
  • Online:2022-11-25 Published:2022-12-22

车轮踏面不圆顺对高速列车轮轨界面黏着与车轮表面损伤的影响

沈明学1,2,3;容彬2;李圣鑫2;赵火平1,2 ;季德惠2;熊光耀2   

  1. 1.华东交通大学载运工具与装备教育部重点实验室,南昌,330013
    2.华东交通大学材料科学与工程学院,南昌,330013
    3.西南交通大学牵引动力国家重点实验室,成都,610031
  • 通讯作者: 赵火平(通信作者),男,1984年生,副教授。研究方向为金属增材制造及摩擦学行为。发表论文20余篇,授权国家发明专利4项。E-mail:zhaohphust@126.com。
  • 作者简介:沈明学,男,1982年生,教授、博士研究生导师。研究方向为铁路摩擦学及关重件服役行为。发表论文100余篇,授权国家发明专利20余项。E-mail:shenmingxue@126.com。
  • 基金资助:
    国家自然科学基金(52061012,51805170);江西省杰出青年基金(20212ACB214003);牵引动力国家重点实验室开放课题(TPL1906)

Abstract: The tribological tests of wheel/rail roll-slip contacts with or without eccentric wheels were carried out on the dual-mode rolling contact fatigue/wear testbed (JD-DRCF/M type). The effects of first-order out-of-round wheels and normal circular wheels on wheel/rail interface adhesions, wheel surface damages and rolling contact fatigue characteristics were compared and analyzed. The results show that the non-roundness of the wheel may significantly reduce the wheel-rail adhesion coefficient, and their wheel-rail adhesion coefficient is less than 0.2 under the wet conditions, which may affect the safe operations and traction effectiveness of trains. The non-roundness of the wheel significantly aggravates wear of the rail and causes obvious difference in wheel surface damages along the circumferential direction. Specifically, the characteristics of fatigue delamination and tearing fracture are most obvious on the convex sides of the wheels. Generally, the surface delamination and pitting are more serious and the fatigue crack propagation angles are larger on the sides facing the convex than that on the sides away from the convex, but the more adhesive layers are accumulated on the sides away from the convex. In addition, the surface roughness, hardness and thickness of plastic deformation layers on the wheels gradually increase at first from the wheel rolling radius rθ changes from the minimum value to the maximum value and then to the minimum value along the circumferential direction, and then gradually decrease after going around the convex.

Key words: high-speed train, wheel out-of-roundness, wheel/rail damage, adhesion coefficient, plastic deformation layer

摘要: 在JD-DRCF/M型滚动接触疲劳/磨损试验台上开展了有/无偏心车轮配副的轮轨滚滑接触摩擦学试验,对比分析了一阶不圆顺车轮和正常圆顺车轮对轮轨界面黏着、车轮表面损伤与滚动接触疲劳特性的影响。结果表明:车轮不圆顺会显著减小轮轨间黏着系数,湿态下不圆顺车轮的轮轨黏着系数不足0.2,影响列车安全运行和牵引效果;车轮不圆顺明显加剧了钢轨磨耗,同时导致车轮沿周向的表面损伤表现出显著差异。具体来说,凸起侧附近疲劳剥落和撕裂断口特征最为明显;迎向凸起侧较背向凸起侧表面剥落更严重、疲劳裂纹扩展角更大;迎向凸起侧表面点蚀现象相对明显,背向凸起侧车轮表面黏着层堆积严重;此外,随着车轮滚动半径rθ由最小值到最大值再到最小值循环变化,不圆顺车轮沿周向的表面粗糙度、表面硬度和塑性变形层厚度大致均呈先逐渐增加、经过凸起侧附近后又逐渐下降的趋势。

关键词: 高速列车, 车轮不圆顺, 轮轨损伤, 黏着系数, 塑性变形层

CLC Number: