[1]LUM M J H, ROSEN J, SINANAN M N, et al. Kinematic Optimization of a Spherical Mechanism for a Minimally Invasive Surgical Robot[J]. IEEE Transactions on Bio-medical Engineering, 2006, 53(7):1440-1145.
[2]宋轶民, 周培, 齐杨, 等. 一类大转角两转动并联机构的构型分析与运动学优化设计[J]. 天津大学学报, 2019, 52(9):908-916.
SONG Yimin, ZHOU Pei, QI Yang, et al. Topology Analysis and Kinematic Optimization of a 2-DoF Rotational Parallel Mechanism with Large Workspace[J]. Journal of Tianjin University, 2019, 52(9):908-916.
[3]LAROCHELLE P. Synthesis of Part Orienting Devices for Spatial Assembly Tasks[C]∥11th International Symposium on Advances in Robot Kinematics. Batz-sur-Mer, France, 2008:79-87.
[4]ESSOMBA T, NGUYEN V L. Kinematic Analysis of a New Five-bar Spherical Decoupled Mechanism with Two-degrees of Freedom Remote Center of Motion[J]. Mechanism and Machine Theory, 2018, 119:184-197.
[5]侯雨雷, 张占叶, 胡鑫喆, 等. 新型两转动自由度完全解耦并联机构及其特性[J]. 哈尔滨工业大学学报, 2014, 46(9):80-85.
HOU Yulei, ZHANG Zhanye. HU Xinzhe, et al. A Novel 2-DOF Fully Decoupled Rotational Parallel Mechanism and Its Characteristics[J]. Journal of Harbin Institute of Technology, 2014, 46(9):80-85.
[6]CARRICATO M. Decoupled and Homokinetic Transmission of Rotational Motion via Constant-velocity Joints in Closed-chain Orientational Manipulators[J]. Transactions of the ASME Journal of Mechanisms and Robotics, 2009, 1(4):041008.
[7]范彩霞, 刘宏昭, 张彦斌, 等. 一种新型 2R 完全解耦并联机构的运动学和奇异性分析[J]. 中国机械工程, 2010, 21(11):622-626.
FAN Caixia, LIU Hongzhao, ZHANG Yanbin, et al. Kinematics and Singularity Analysis of a Novel 2R Fully-decoupled Parallel Manipulator[J]. China Mechanical Engineering, 2010, 21(11):622-626.
[8]张彦斌, 荆献领, 韩建海, 等. 新型RR-RURU踝关节康复机器人机构的设计与分析[J]. 中国机械工程, 2019, 30(14):1734-1741.
ZHANG Yanbin, JING Xianling, HAN Jianhai, et al. Design and Analysis of a Novel RR-RURU Ankle Rehabilitation Robot Mechanism[J]. China Mechanical Engineering, 2019, 30(14):1734-1741.
[9]GOGU G. Structural Synthesis of Fully-isotropic Parallel Robots with Schnflies Motions via Theory of Linear Transformations and Evolutionary Morphology[J]. European Journal of Mechanics/A Solids, 2007, 26(2):242-269.
[10]XU Yundou, ZHANG Dongsheng, WANG Min, et al. Type Synthesis of Two-degrees-of-freedom Rotational Parallel Mechanism with Two Continuous Rotational Axes[J]. Chinese Journal of Mechanical Engineering, 2016, 29(4):1-9.
[11]ZENG Daxing, HUANG Zhen. Type Synthesis of the Rotational Decoupled Parallel Mechanism Based on Screw Theory[J]. Science China Technological Sciences, 2011, 54(4):998-1004.
[12]SYRSELOUDIS C E, EMIRIS I Z, LILAS T, et al. Design of a Simple and Modular 2-DOF Ankle Physiotherapy Device Relying on a Hybrid Serial-parallel Robotic Architecture[J]. Applied Bionics and Biomechanics, 2011, 8(1):101-114.
[13]孙驰宇, 沈惠平, 袁军堂, 等. 基于方位特征方程的2T2R并联机构拓扑综合与分类[J]. 农业机械学报, 2018, 49(11):409-418.
SUN Chiyu, SHEN Huiping, YUAN Juntang, et al. Topological Structural Synthesis and Classification of 2T2R Parallel Mechanism Based on POC Equations[J]. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(11):409-418.
[14]张伟中, 徐灵敏, 童俊华, 等. 2-PUR-PSR并联机构的运动学分析及尺度综合[J]. 机械工程学报, 2018, 54(7):45-53.
ZHANG Weizhong, XU Lingmin, TONG Junhua, et al. Kinematic Analysis and Dimensional Synthesis of 2-PUR-PSR Parallel Manipulator[J]. Journal of Mechanical Engineering, 2018, 54(7):45-53.
[15]WU Guanglei, CARO S, WANG Jiawei. Design and Transmission Analysis of an Asymmetrical Spherical Parallel Manipulator[J]. Mechanism & Machine Theory, 2015, 94:119-131.
[16]张海强, 房海蓉. 含恰约束支链的冗余驱动并联机构性能分析[J]. 北京交通大学学报, 2018, 42(1):139-144.
ZHANG Haiqiang, FANG Hairong. Performance Analysis of a Redundantly Actuated Parallel Manipulator with Suitable Constraint Branch[J]. Journal of Beijing Jiaotong University, 2018, 42(1):139-144.
[17]胡旭宇, 刘宏昭. 含恰约束支链的驱动变胞机构构型综合与分析[J]. 农业机械学报, 2020, 51(1):383-390.
HU Xuyu, LIU Hongzhao. Type Synthesis and Analysis of Class of Actuated Metamorphic Mechanisms with Suitable Constrained Branch[J]. Transactions of the Chinese Society for Agricultural Machinery, 2018, 49(11):409-418.
[18]王庚祥, 刘宏昭, 原大宁. 空间 4-SPS/CU 并联机构的受力分析[J]. 农业工程学报, 2012, 28(22):30-38.
WANG Gengxiang, LIU Hongzhao, YUAN Daning. Force Analysis of Spatial 4-SPS/CU Parallel Mechanism[J]. Transactions of the Chinese Society of Agricultural Engineering, 2012, 28(22):30-38.
[19]HU Bo, LU Yi, ZHANG Xiuli, et al. Solving Stiffness and Elastic Deformation of Two Limited-degree-of-freedom Parallel Manipulators with a Constrained Leg Based on Active/Constrained Wrench[J]. Advanced Robotics, 2011, 25(9/10):1331-1348.
[20]黄田, 李曚, 吴孟丽, 等. 可重构PKM模块的选型原则——理论与实践[J]. 机械工程学报, 2005, 41(8):36-41.
HUANG Tian, LI Meng, WU Mengli, et al. Criteria for Conceptual Design of Reconfigurable PKM Modules-theory and Application[J]. Journal of Mechanical Engineering, 2005, 41(8):36-41.
[21]KONG Xianwen. Forward Displacement Analysis of a 2-DOF RR-RRR-RRR Spherical Parallel Manipulator[C]∥IEEE/ASME International Conference on Mechatronic and Embedded System and Applications. Qingdao, 2010:446-275.
|