考虑杆件柔性的间隙机构系统磨损分析

摘要/Abstract

摘要：

基于机械系统动力学分析软件ADAMS建立了含多间隙曲柄滑块机构的动力学模型，利用冲击函数理论模拟间隙处的接触碰撞作用，详细研究了构件柔性和铰链间隙对机构系统动力学特性的影响，并应用Archard磨损模型对间隙运动副的磨损进行了预测。当考虑杆件柔性时，应用ANSYS程序创建连杆的有限元模型，取连杆的前五阶模态导入ADAMS中建立含柔性连杆的多间隙机构动力学模型并进行动力学仿真计算，结果发现，考虑杆件柔性时的间隙机构系统动态行为在很大程度上趋于理想机构，在曲柄转动一个周期的过程中间隙运动副除在几个特定的位置处发生了较大的碰撞外，轴销与轴套均保持连续接触，且预测所得的磨损量也较小。

关键词: 间隙, 曲柄滑块机构, 接触碰撞, 构件柔性, 磨损

Abstract:

A slider-crank mechanism with multi-clearance was established based on the mechanical system dynamics analytical software ADAMS. In the process, the impact function theory was used to simulate contact and collision occurring in the clearance joints. The dynamic effects of flexible members and clearance joints on mechanical systems were studied in detail, and the Archard wear model was employed to predict the wear of clearance joint.A finite element model of linkage was established through ANSYS considering the linkage was flexible, and the first five modes of the linkage were exported into ADAMS to set up a rigid-flexible coupling model of slider crank mechanism with multi-clearance.The simulation results show that the dynamic behavior of the slider-crank mechanism with clearances and flexible linkage is very close to the ideal mechanism.In the process that the crank moves for one cycle, the impact force in the clearance joint occurs in some special locations, the pin and bushing still keep a continuous contact in a large range of crank angle, and the wear result predicted is reduced.

Key words: clearance;slider-crank , mechanism;contact impact;flexible member;wear

中图分类号:

TH113

邓培生, 原大宁, 刘宏昭, 王庚祥. 考虑杆件柔性的间隙机构系统磨损分析[J]. 中国机械工程, 2016, 27(02): 143-149.

Deng Peisheng, Yuan Daning, Liu Hongzhao, Wang Gengxiang. Wear Analysis on Intermittent Mechanism Systems Inclulding Flexible Bar[J]. China Mechanical Engineering, 2016, 27(02): 143-149.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2016/V27/I02/143

参考文献

[1]白争锋,赵阳，赵志刚.考虑运动副间隙的机构动态特性研究[J]. 振动与冲击, 2011,30(11):17-20.
Bai Zhengfeng,Zhao Yang,Zhao Zhigang.Dynamic Characteristics of Mechanisms with Joint Clearance[J].Journal of Ibration and Shock, 2011, 30(11):17-20.
[2]Flores P,Lankarani H M.Dynamic Response of Multibody Systems with Multiple Clearance Joints[J].Journal of Computational and Nonlinear Dynamics,2012,7(3): 13-18.
[3]Erkaya S,Uzmay I.Experimental Investigation of Joint Clearance Effects on the Dynamics of a Slider-crank Mechanism[J].Multibody System Dynamics,2010,24(1):81-102.
[4]Megahed S M,Haroun A F.Analysis of the Dynamic Behavioral Performance of Mechanical Systems with Multi-clearance Joints[J]. Journal of Computational and Nonlinear Dynamics, 2011,7:1-11.
[5]Dupac M,Beale D G.Dynamic Analysis of a Flexible Linkage Mechanism with Cracks and Clearance[J].Mechanism and Machine Theory, 2010, 45(12):1909-1923.
[6]Erkaya S,Uzmay I.Effects of Balancing and Link Flexibility on Dynamics of a Planar Mechanism Having Joint Clearance[J].Scientia Iranica, 2012,19(3):483-490.
[7]Zheng Enlai,Zhou Xinlong.Modeling and Simulation of Flexible Slider-crank Mechanism with Clearance for a Closed High Speed Press System[J]. Mechanism and Machine Theory,2014,74:10-30.
[8]Flores P.Modeling andSimulation of Wear in Revolute Clearance Joints in Multibody Systems[J].Mechanism and Machine Theory, 2009, 44(6):1211-1222.
[9]Flores P,Ambrósio J,Claro J P.Dynamic Analysis for Planar Multibody Mechanical Systems with Lubricated Joints[J].Multibody System Dynamics, 2004,12(1): 47-74.
[10]Bai Zhengfeng,Zhao Yang,Chen Jun.Dynamics Analysis of Planar Mechanical System Considering Revolute Clearance Joint Wear[J]. Tribology International,2013,64:85-95.
[11]Mukras S,Kim N H,Mauntler N A,et al.Analysis of Planar Multibody Systems with Revolute Joint Wear[J].Wear, 2010,268(5/6): 643-652.
[12]Khemili I,Romdhane L.Dynamic Analysis of a Flexible Slider–crank Mechanism with Clearance[J].European Jouranl of Mechanics A/Solids, 2008,27(5):882-898.
[13]Bai Zhengfeng,Zhao Yang.A hybrid Contact Force Model of Revolute Joint with Clearance for Planar Mechanical Systems[J]. International Journal of Non-Linear Mechanics,2013,48:15-36.
[14]Archard J F.Contact and Rubbing of Flat Surfaces[J]. Journal of Applied Physics,1953,24:981-988.
[15]Schmitz T L,Action J E,Burris D L,et al.Wear-rate Uncertainty Analysis[J].ASME Journal of Tribology, 2004,126(4):802-808.