[1]高新宇, 岳晨冲, 秦红强,等. 功能化复合材料性能改善研究[C]∥第六届空天动力联合会议暨中国航天第三专业信息网第四十二届技术交流会暨2021航空发动机技术发展高层论坛.成都, 2022:177-184.
GAO Xinyu, YUE Chenchong, QIN Hongqiang, et al. Study on Performance Improvement of Functional Composites[C]∥6th Aerospace Power Joint Conference and 42nd Technology Exchange Conference of China Aerospace Third Professional Information Network and 2021 High Level Forum on Aero Engine Technology Development.Chengdu, 2022:177-184.
[2]徐雯婷. 纤维增强树脂基复合材料在直升机的应用现状[J]. 纤维复合材料, 2021(3):90-93.
XU Wenting. Application Status of Fiber Reinforced Resin Matrix Composites in Helicopter[J]. Fiber Composites,2021(3):90-93.
[3]金启豪, 陈娟, 彭立明,等. 碳纤维增强树脂基复合材料与铝/镁合金连接研究进展[J]. 材料工程, 2022, 50(1):15-24.
JIN Qihao, CHEN Juan, PENG Liming, et al.Research Progress in Joining of Carbon Fiber Reinforced Polymer Composites and Aluminum/magnesium Alloys[J]. Journal of Materials Engineering,2022, 50(1):15-24.
[4]许江菱. 2017~2018 年世界塑料工业进展Ⅱ[J]. 塑料工业, 2019, 47(4):1-10.
XU Jiangling. Progress of the Worlds Plastics Industry in 2017~2018 (Ⅱ)[J]. China Plastics Industry, 2019, 47(4):1-10.
[5]GUO H, DU S, LEI J, et al. Influence of Twin Carbide Structure on Friction and Wear Properties of G95Cr18 Stainless Bearing Steel[J]. Frontiers in Materials, 2019, 6:1-9.
[6]ZHANG D. Research Progress of Porous Polymer Bearing Retainer Materials Used in Aerospace[J]. Journal of Mechanical Engineering, 2018, 54(9):17-26.
[7]GINZBURG B M, TOCHIL’NIKOV D G, BAKHAREVA V E, et al. Polymeric Materials for Water-lubricated Plain Bearings[J]. Russian Journal of Applied Chemistry, 2006, 79(5):695-706.
[8]ARTHANAREESWARAN G, MOHAN D, RAAJENTHIREN M. Preparation, Characterization and Performance Studies of Ultrafiltration Membranes with Polymeric Additive[J]. Journal of Membrane Science, 2010, 350(1/2):130-138.
[9]祁渊, 龚俊, 杨东亚,等. 纳米 Al2O3 填料增强 PEEK-PTFE 复合材料基于环-块摩擦结构的摩擦过程研究[J]. 材料导报, 2019, 33(5):1756-1761.
QI Yuan,GONG Jun,YANG Dongya,et al. Study on Tribological Properties Evolution of PTFE Composites Filled with PEEK and Nano-Al2O3 Based on Block-on-ring Friction Model[J]. Materials Reports, 2019, 33(5):1756-1761.
[10]BALYAKIN V B, ZHIL’NIKOV E P, PILLA C K. Calculating Life Spans of Bearings Taking into Consideration the Wear and Failure of PTFE Cages[J]. Journal of Friction and Wear, 2018, 39(1):19-23.
[11]ZHOU Q, LI S, ZHANG K, et al. Transitions of Wear Characteristics for Rubber/Steel Seal Pairs during the Abrasive Wear Process[J]. Tribology Letters, 2021, 69(3):1-13.
[12]GUO L, QI H, ZHANG G, et al. Distinct Tribological Mechanisms of Various Oxide Nanoparticles Added in PEEK Composite Reinforced with Carbon Fibers[J]. Composites Part A:Applied Science and Manufacturing, 2017, 97:19-30.
[13]BURRIS D L, BOESL B, BOURNE G R, et al. Polymeric Nanocomposites for Tribological Applications[J]. Macromolecular Materials and Engineering, 2007, 292(4):387-402.
[14]WANG Z, GAO D. Friction and Wear Properties of Stainless Steel Sliding against Polyetheretherketone and Carbon-fiber-reinforced Polyetheretherketone under Natural Seawater Lubrication[J]. Materials & Design, 2014, 53:881-887.
[15]LIN Guoming, XIE Guangyou, SUI Guoxin, et al. Hybrid Effect of Nanoparticles with Carbon Fibers on the Mechanical and Wear Properties of Polymer Composites[J]. Composites Part B:Engineering, 2012, 43(1):44-49.
[16]GAN K, LIU H, LIU X, et al. Research Progress of Polyether Ether Ketone Biocomposites[J]. Annals of Materials Science & Engineering, 2015, 2(1):15-23.
[17]方良超, 陈奇海, 霍绍新,等. 聚醚醚酮( PEEK) 的改性及其应用[J]. 合成材料老化与应用, 2019, 48(2):121-124.
FANG Liangchao, CHEN Qihai, HUO Shaoxin, et al. Modification andApplication of Polyether Ether Ketone (PEEK)[J]. Synthetic Materials Aging and Application, 2019, 48(2):121-124.
[18]齐慧敏, 胡超, 李洁, 等. 宽温域环境中聚四氟乙烯及其复合材料摩擦学性能研究[J]. 摩擦学学报, 2022, 42(1):65-73.
QI Huimin, HU Chao, LI Jie,et al. Tribological Performance of PTFE and Its Composite in Wide Temperature Range[J].Tribology, 2022, 42(1):65-73.
[19]JOHANSSON P, MARKLUND P, BJRLING M, et al. Effect of Humidity and Counterface Material on the Friction and Wear of Carbon Fiber Reinforced PTFE Composites[J]. Tribology International, 2021, 157(2):55-63.
[20]丁浩亮, 汤炜, 魏赛. 短切玻璃纤维增强聚醚醚酮承力支架研制[J]. 宇航材料工艺, 2018, 48(5):77-81.
DING Haoliang, TANG Wei, WEI sai. Development of Short Cut Glass Fiber Reinforced PEEK Bearing Bracket[J]. Aerospace Materials & Technology, 2018, 48(5):77-81.
[21]SHA J J, DAI J X, LI J, et al. Measurement and Analysis of Fiber-matrix Interface Strength of Carbon Fiber-reinforced Phenolic Resin Matrix Composites[J]. Journal of Composite Materials, 2013, 48(11):1303-1311.
[22]JIAN L, NING L, YANG S, et al. Tribo Electrification Electrostatic Potential of Graphite/ monomer Casting Nylon Composites under Dry Sliding:Correlation with Electrical Resistivity and Wear Mechanisms[J]. Polymer Composites, 2009:62(7):86-93.
[23]兰天宇, 王雅珍, 陈国力,等. 塑料用抗静电剂的研究进展[J]. 广东化工, 2014, 41(9):96-97.
LAN Tianyu, WANG Yazhen, CHEN Guoli, et al. Development of Antistatic Agent Used in Plastics[J]. Guangdong Chemical Industry, 2014, 41(9):96-97.
[24]梁琦, 贾润礼. 石墨和短纤维填充聚乙烯抗静电材料的研究[J]. 塑料, 2007, 36(2):23-25.
LIANG Qi, JIA Runli.Anti-static Polyethylene Material Filled by Graphite and Chopped Fiber[J]. Plastics, 2007, 36(2):23-25.
[25]秦旺平, 程庆, 汪炉林,等. 高分子材料的阻燃抗静电改性研究进展[J]. 工程塑料应用, 2014, 42(4):123-130.
QIN Wangping, CHENG Qing, WANG Lulin, et al. Research Progress in Flame Retardant and Antistatic Modifi Cation for Polymer[J]. Engineering Plastics Application, 2014, 42(4):123-130.
[26]BIJWE J, SHARMA S, SHARMA M, et al. Exploration of Potential of Solid Lubricants and Short Fibers in Polyetherketone (PEK) Composites[J]. Wear, 2013, 301(1/2):810-819.
[27]徐利敏, 赵剑锋, 雷玉平,等. 特种工程塑料 PE EK 的合成与表征[C]∥湖北省化学化工学会2006年年会暨循环经济专家论坛.武汉, 2006:326-330.
XU Limin, ZHAO Jianfeng, LEI Yuping, et al. Synthesis and Characterization of Special Engineering Plastics PE (EK)[C]∥2006 Annual Meeting and Circular Economy Expert Forum of Hubei Chemical Industry Society.Wuhan, 2006:326-330.
[28]丛世杰, 任庆龙, 夏英,等. 芦苇/碳纤维增强PP/EVA复合材料的制备及性能研究[J]. 合成纤维工业, 2017, 40(1):46-49.
CONG Shijie,REN Qinglong,XIA Ying, et al. Preparation and Properties of Reed/Carbon Fiber-reinforced PP /EVA Composite[J]. China Synthetic Fiber Industry,2017, 40(1):46-49.
[29]BRISCOE B J, YAO L H. The Friction and Wear of Poly ( tetrafluoroethylene) -Poly ( etheretherketone) Composites:an Initial Appraisal of the Optimum Composition[J]. Wear, 1986, 108:357-374.
[30]李恩重, 徐滨士, 王海斗,等. PEEK与GF/PEEK摩擦学性能研究[C]∥第十一届全国摩擦学大会.兰州, 2013:1-4.
LI Enzhong, XU Binshi, WANG Haidou, et al. Study on the Tribological Property of Polyetherketone and Glass Fiber Reinforced Polyetherketone Composites[C]∥The 11th National Tribology Conference. Lanzhou, 2013:1-4.
[31]FU H, FU L, ZHANG G L, et al. Abrasion Mechanism of Stainless Steel/Carbon Fiber-reinforced Polyether-ether-ketone (PEEK) Composites[J]. Journal of Materials Engineering and Performance, 2009, 18(7):973-979.
[32]PANDA J N, BIJWE J, PANDEY R K. Tribo-performance enhancement of PAEK Composites Using Nano/Micro-particles of Metal Chalcogenides[J]. Composites Science and Technology, 2018, 167:7-23.
[33]LIN L, ZHAO Y, HUA C, et al. Effects of the Velocity Sequences on the Friction and Wear Performance of PEEK-based Materials[J]. Tribology Letters, 2021, 69(2):95-103.
[34]ZHANG H, ZHANG D Y, HUA M, et al. A Study on the Tribological Behavior of Surface Texturing on Babbitt Alloy under Mixed or Starved Lubrication[J]. Tribology Letters, 2014, 56(2):305-315.
[35]高聪. 聚醚醚酮/聚酰亚胺合金及其导电复合材料的结构与性能研究[D]. 长春:吉林大学, 2016.
GAO Cong. Study on the Structure and Properties of P(ether ether ketone)/Polyimide Blends and Their Conductive Composites[D]. Changchun:Jilin University,2016.
[36]许亚东. 聚合物电磁屏蔽复合材料的结构设计与性能研究[D]. 太原:中北大学, 2019.
XU Yadong. Electromagnetic Interference Shielding Polymer Composites:Structural Design and Performance Research[D]. Taiyuan:North University of China,2019.
|