[1]HANSEN A, IOV F, BLAABJERG F, et al. Review of Contemporary Wind Turbine Concepts and Their Market Penetration[J].Wind Engineering,2004,28(3):247-263.
[2]PREZ J M P, MRQUEZ F P G, TOBIAS A, et al. Wind Turbine Reliability Analysis[J].Renewable and Sustainable Energy Reviews,2013,23(23):463-472.
[3]LU B, LI Y, WU X, et al. A Review of Recent Advances in Wind Turbine Condition Monitoring and Fault Diagnosis[C]//Power Electronics and Machines in Wind Applications. Pemwa,2009:1-7.
[4]TAVNER P, SPINATO F, BUSSEL G J W V, et al. Reliability of Different Wind Turbine Concepts with Relevance to Offshore Application[C]//Proceedings of European Wind Energy Conference.Brussels,2008:1-10.
[5]SHAFIEE M. A Fuzzy-FMEA Risk Assessment Approach for Offshore Wind Turbines[J]. International Journal of Prognostics & Health Management,2013,4(S2):1-10.
[6]General Electric Company. Mod 1 Wind Turbine Generator Failure Modes And Effects Analysis[R]. Washington, D.C.:NASA,1979.
[7]KLUTKE G-A, KIESSLER P C, WORTMAN M. A Critical Look at the Bathtub Curve[J]. IEEE Transactions on Reliability,2003,52(1):125-129.
[8]刘波. 基于零部件寿命相关的风电齿轮箱可靠性建模[D]. 兰州:兰州理工大学,2013.
LIU Bo. Reliability Modeling for Wind Turbine Gearbox Based on Considering the Failure Correlation Existed in Components[D].Lanzhou :Lanzhou University of Technology,2013.
[9]ARABIAN-HOSEYNABADI H, ORAEE H, TAVNER P. Failure Modes and Effects Analysis (FMEA) for Wind Turbines[J]. International Journal of Electrical Power & Energy Systems,2010,32(7):817-824.
[10]GUO H, WATSON S, TAVNER P, et al. Reliability Analysis for Wind Turbines with Incomplete Failure Data Collected from after the Date of Initial Installation[J]. Reliability Engineering & System Safety,2009,94(6):1057-1063.
[11]ZHANG X, KANG J, JIN T. Degradation Modeling and Maintenance Decisions Based on Bayesian Belief Networks[J].IEEE Transactions on Reliability,2014,63(2):620-633.
[12]SINGH M, MULJADI E, JONKMAN J, et al. Simulation for Wind Turbine Generators—with FAST and MATLAB-Simulink Modules[R].Golden:United States:National Renewable Energy Laboratory (NREL), 2014.
[13]OYAGUE F, BUTTERFIELD C, SHENG S. Gearbox Reliability Collaborative Analysis Round Robin[R]. Golden:National Renewable Energy Laboratory,2009.
[14]KELLER J A, GUO Y, SETHURAMAN L. Gearbox Reliability Collaborative Investigation of Gearbox Motion and High-speed-shaft Loads[R].Golden:National Renewable Energy Laboratory,2016.
[15]SMOLDERS K, LONG H, FENG Y, et al. Reliability Analysis and Prediction of Wind Turbine Gearboxes[C]// European Wind Energy Conference and Exhibition. Warsaw,2010:2660-2682.
[16]AL-TUBI I S, LONG H. Prediction of Wind Turbine Gear Micropitting under Variable Load and Speed Conditions Using ISO/TR 15144-1: 2010[J].ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996,2013,227(9):1898-1914.
[17]FENG Y, QIU Y, CRABTREE C J, et al. Use of SCADA and CMS Signals for Failure Detection & Diagnosis of a Wind Turbine Gearbox[J].European Wind Energy Conference and Exhibition. Brussels,2011:17-19.
[18]NEJAD A R, GAO Z, MOAN T. Fatigue Reliability-based Inspection and Maintenance Planning of Gearbox Components in Wind Turbine Drivetrains[J]. Energy Procedia,2014,53:248-257.
[19]周志刚, 秦大同, 杨军, 等. 考虑失效相关性的风力发电机齿轮传动系统动态可靠性分析[J]. 太阳能学报,2013,34(7):1212-1219.
ZHOU Zhigang, QIN Datong, YANG Jun, et al. Time-dependent Reliability Analysis of Gear Transmission System of Wind Turbine Considering Dependent Failure[J]. Acta Energiae Solaris Sinica,2013,34(7):1212-1219.
[20]谢里阳, 刘建中, 吴宁祥, 等. 风电装备传动系统及零部件疲劳可靠性评估方法[J]. 机械工程学报,2014,50(11):1-8.
XIE Liyang, LIU Jianzhong, WU Ningxiang, et al. Fatigue Reliability Evaluation Method for Gearbox Component and System of Wind Turbine[J]. Journal of Mechanical Engineering,2014,50(11):1-8.
[21]GIORSETTO P, UTSUROGI K F. Development of a New Procedure for Reliability Modeling of Wind Turbine Generators[J].IEEE Transactions on Power Apparatus and Systems,1983,PAS-102(1):134-143.
[22]TOFT H S, SRENSEN J D. Reliability-based Design of Wind Turbine Blades[J]. Structural Safety,2011,33(6):333-342.
[23]DIMITROV N, FRIIS-HANSEN P, BERGGREEN C. Reliability Analysis of a Composite Wind Turbine Blade Section Using the Model Correction Factor Method: Numerical Study and Validation[J].Applied Composite Materials,2013,20(1):17-39.
[24]KUSIAK A, LI W. The Prediction and Diagnosis of Wind Turbine Faults[J]. Renewable Energy,2011,36(1):16-23.
[25]朱才朝, 胥良, 马飞, 等. 兆瓦级风电齿轮箱远程实时在线测试及评价[J]. 振动与冲击,2012,(20):17-22.
ZHU Chaichao, XU Liang, MA Fei, et al. Remote Real-time Online Testing and Evaluation for a Megawatt Level Wind Turbine Gearbox[J]. Journal of Vibration & Shock,2012,31(20):17-22.
[26]周志刚, 秦大同, 杨军, 等. 随机风载作用下风力发电机齿轮传动系统疲劳寿命预测[J]. 太阳能学报,2014,35(7):1183-1190.
ZHOU Zhigang, QIN Datong, YANG Jun, et al. Fatigue Life Prediction of Gear Transmission System of Wind Turbine under Stochastic Wind Load[J]. Acta Energiae Solaris Sinica,2014,35(7):1183-1190.
[27]LIANG Y, AN Z, LIU B. Fatigue Life Prediction for Wind Turbine Main Shaft Bearings[C]//International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.Chengdu,2013:888-893.
[28]MANUEL L, NGUYEN H H, BARONE M F. On the Use of a Large Database of Simulated Wind Turbine Loads to Aid in Assessing Design Standard Provisions[C]//Proceedings of the 51st AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.Grapevine,2013:1-9.
[29]SMARSLY K, HARTMANN D, LAW K H. An Integrated Monitoring System for Life-cycle Management of Wind Turbines[J]. Smart Structures & Systems,2013,12(2):209-233.
[30]SMARSLY K, LAW K H, HARTMANN D. Towards Life-cycle Management of Wind Turbines Based on Structural Health Monitoring[C]//International Conference on Performance-based Life-cycle Structural Engineering. Hong Kong,2012:1-9. |