[1]Liang S Y,Su J C. Residual Stress Modeling in Orthogonal Machining[J].CIRP Annals-Manufacturing Technology, 2007, 56(1): 65-68.
[2]Choi Y. Influence of Tool Flank Wear on Performance of Finish Hard Machinged Surfaces in Rolling Contact[J]. The International Journal of Fatigue, 2010, 32(2): 390-397.
[3]Mamalis A G,Kundrak J, Gyani K. On the Dry Machining of Steel Surfaces Using Superhard Tools[J]. The International Journal of Advanced Manufacturing Technology, 2002, 19(3): 157-162.
[4]Thiele J D, Meikote S N,Peascoe R A, et al. Effect of Cutting-edge Geometry and Workpiece Hardness on Surface Residual Stress in Finish Hard Turning of ASI52100 Steel[J]. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2000, 122(4): 642-649.
[5]Jiang H,Umbrello D, Shivpuri R. Investigation of Cutting Condition and Cutting Edge Preparations for Enhanced Compressive Subsurface Residual Stress in the Hard Turning of Bearing Steel[J].Journal of Materials Processing Technology, 2006, 171(2): 180-187.
[6]Matsumoto Y, Hashimoto F,Lahoti G. Surface Integrity Generated by Precision Hard Turning[J].CIRP Annals-Manufacturing Technology,1999,48(1): 59-62.
[7]谢华永, 董汉杰, 张玉玲. 精密硬车精密加工工艺试验[J]. 轴承, 2014(7): 22-23.
Xie Yonghua, Dong Hanjie, Zhang Yuling. Precision Finishing Hard Turning Technology Test[J]. Bearing, 2014(7): 22-23.
[8]岳彩旭, 杨永衡, 刘飞,等. 精密硬态切削过程中已加工表面变质层生成研究[J]. 纳米技术与精密工程,2014,5(12): 222-226.
Yue Caixu, Yang Yongheng, Liu Fei,et al. Precision Hard Cutting Process has been Processed Deteriorated Layer Generated Surface[J]. Nanotechnology and Precision Engineering,2014,5(12): 222-226.
[9]M'Saoubi R,Outeiro J C,Chandrasekaran H,et al. A Review of Surface Integrity in Machining and Its Impact on Functional Performance and Life of Machined Products[J].International Journal of Sustainable Manufacturing, 2008, 1(1/2): 203-236.
[10]Guo Y B, Liu C R. 3D FEA Modeling of Hard Turning[J]. Manufacturing Science and Engineering, 2002, 124(5): 189-199.
[11]Umbrello D.Influence of Material Microstructure Changes on Surface Integrity in Hard Machining of AISI 52100 Steel[J]. The International Journal of Advanced Manufacturing Technology, 2011, 54(9/12): 887- 898.
[12]庄其昌,陈有光. 微型轴承滚道表面层显微硬度实验研究[J]. 磨料磨具与磨削, 1985(6): 6-10.
Zhuang Qichang,Chen Youguang. Experimental Study on Micro-hardness of the Surface Layer Raceway[J]. Abrasives and Grinding, 1985(6): 6-10.
[13]张家栋, 李强, 王灵芝. 利用巴克豪森效应测量转向架焊接构架残余应力[J]. 机车车辆工艺, 2009(2): 1-4.
Zhang Jiadong, Li Qiang, Wang Lingzhi. Barkhausen Effect Measurements Bogie Frame Welding Residual Stress[J]. Locomotive & Rolling Stock Technology, 2009(2): 1-4.
[14]刘香茹,张继奇,刘贤德,等. 利用巴克豪森噪声分析法评价轴承烧伤的试验[J]. 轴承, 2010(11):28-29, 36.
Liu Xiangru,Zhang Jiqi,Liu Xiande,et al. Barkhausen Noise Analysis Evaluation Bearings Test Burn [J]. Bearing, 2010(11):28-29, 36.
[15]桂立丰,唐汝钧,丁定远,等. 磨削热对GCr15 轴承钢表面相变及性能的影响[J].金属材料,1983(1):49-60.
Gui Lifeng,Tang Ruyun,Ding Dingyuan,et al. Effect of Heat on the Grinding Surface of GCr15 Bearing Steel Phase Transformation and Properties[J]. Metallic Material,1983(1):49-60.
[16]岳彩旭,刘献礼,王宇,等. 硬态车削与磨削工艺的表面完整性[J]. 工具技术, 2008, 42(7):13-18.
Yue Caixu,Liu Xianli,Wang Yu,et al. Hard Turning Surface Integrity of the Grinding Process[J]. Tool Engineering, 2008, 42(7):13-18.
[17]王洪祥, 孟庆鑫, 宗文俊,等. 金刚石刀具前角对超精密切削过程影响的有限元分析[J].哈尔滨工业大学学报, 2004, 36(9): 1220-1228.
Wang Xianghong, Meng Qingxin, Zong Wenjun,et al. Finite Element Analysis of Rake Angle on Diamond Ultra-precision Cutting Process[J].Journal of Harbin Institute of Technology, 2004,36(9): 1220-1228.
|