基于EEMD的单通道盲源分离在轴承故障诊断中的应用

摘要/Abstract

摘要：

针对一维观测矩阵的极度欠定盲分离模型，结合盲源分离和总体经验模式分解的优点，利用总体经验模式分解将单通道信号转化为固有模态矩阵，重组观测矩阵，再通过近似联合对角化实现信号的盲分离。数据仿真说明该方法能提取低信噪比下的轴承故障信息。实验中，对2种不同故障的轴承进行故障诊断，从而进一步证明了该方法的有效性。

关键词: 总体经验模式分解, 盲源分离, 独立分量分析, 故障诊断

Abstract:

For the problem of extremely underdetermined BSS, which had only one dimensional observing matrix, an algorithm which combining the advantages of EEMD and BSS was used. First, the single-channel was decomposed into intrinsic mode matrix by EEMD, then observing matrix was rebuilt and the estimated sources by joint approximate diagonalization of eigenmatrix was obtained finally. The simulation results show that this method can extract the bearing fault information under low SNR. In experiments, two bearings with different faults were diagnosed, and further confirmed the effectivity of this method.

Key words: ensemble empirical mode decomposition(EEMD), blind source separation(BSS), independent component analysis, fault diagnosis

中图分类号:

TH17

李晓晖, 傅攀. 基于EEMD的单通道盲源分离在轴承故障诊断中的应用[J]. 中国机械工程, 2014, 25(7): 924-930.

Li Xiaohui, Fu Pan. Application of Single-channel Blind Source Separation Based on EEMD in Bearing Fault Diagnosis[J]. China Mechanical Engineering, 2014, 25(7): 924-930.

参考文献

[1]杨志伊.设备状态监测与故障诊断[M]. 北京:中国计划出版社,2006.
[2]樊永生. 机械设备诊断的现代信号处理方法[M]. 北京:国防工业出版社,2009.
[3]秦亮,石林锁，张亚洲. 基于盲信号提取的机械振动信号消噪方法研究[J]. 电子测量技术,2009,32(2):4-6.
Qin Liang, Shi Linsuo, Zhang Yazhou. Research of the Noise Removal Method for Mechanical Vibration Signal Based on Blind Signal Extraction[J]. Electronic Measurement Technology, 2009, 32(2): 4-6.
[4]王冬云，张文志. 基于小波包变换的滚动轴承故障诊断[J]. 中国机械工程，2012,23(3):295-298.
Wang Dongyun, Zhang Wenzhi. Fault Diagnosis Study of Ball Bearing Based on Wavelet Packet Transform[J]. China Mechanical Engineering, 2012, 23(3): 295-298.
[5]苏文胜,王奉涛,张志新,等. EMD降噪和谱峭度法在滚动轴承早期故障诊断中的应用[J]. 振动与冲击,2009,29(3):18-21.
Su Wensheng, Wang Fengtao, Zhang Zhixin, et al. Application of EMD Denoising and Spectral Kurtosis in Early Fault Diagnosis of Rolling Element Bearings[J]. Journal of Vibration and Shock, 2009, 29(3): 18-21.
[6]史习智. 盲信号处理——理论与实践[M]. 上海:上海交通大学出版社,2008.
[7]杨福生,洪波. 独立分量分析的原理与应用[M]. 北京: 清华大学出版社,2006.
[8]彭耿,黄知涛,姜文利,等. 单通道盲信号分离研究进展与展望[J]. 中国电子科学研究院学报，2009,4(3):268-277.
Peng Geng, Huang Zhitao, Jiang Wenli, et al. Development and Perspective of Single Channel Blind Signal Separation Signal Separation[J].Journal of China Academy of Electronics and Information Technology, 2009, 4(3): 268-277.
[9]Wu Z H, Huang N E. Ensemble Empirical Mode Decomposition: a Noise-assisted Data Analysis Method[J]. Advances in Adaptive Data Analysis, 2009, 1(1): 1-41.
[10]Cardoso J. Blind Beamforming for Non-gaussian Signals[J]. IEEE-Proceedings-F, 1993, 140(6): 362-370.
[11]Huang N E, Zheng S, Long S R, et al. The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-stationary Time Series Analysis[J]. Proc. of the Royal Society of London, 1998, A(454): 903-995.
[12]刘佳,杨士莪, 朴胜春. 基于EEMD的地声信号单通道盲源分离算法[J]. 哈尔滨工程大学学报,2011,32(2): 194-199.
Liu Jia, Yang Shie, Piao Shengchun. The Single Channel Seismic-acoustic Signal Blind-source Separation Method Based on EEMD[J]. Journal of Harbin Engineering University, 2011, 32(2):194-199.
[13]陈隽,李想. 运用总体经验模态分解的疲劳信号降噪方法[J]. 振动、测试与诊断,2011,31(1):15-19.
Chen Juan, Li Xiang. Application of Ensemble Empirical Mode Decomposition to Noise Reduction of Fatigue Signal[J]. Journal of Vibration, Measurement and Diagnosis, 2011,31(1):15-19.
[14]董文智,张超. 基于EEMD能量熵和支持向量机的轴承故障诊断[J]. 机械设计与研究,2011,27(5):53-56.
Dong Wenzhi, Zhang Chao. A Bearing Fault Diagnosis Method Based on EEMD Energy Entropy and SVM[J]. Machine Design and Research, 2011,27(5): 53-56.
[15]王翔,王仲生. 基于改进Hilbert-Huang变换的转子碰摩故障诊断[J]. 中国机械工程，2011, 22(24): 2937-2940.
Wang Xiang, Wang Zhongsheng. Incipient Rub-impact Fault Diagnosis of Rotor System Using Improved HHT[J]. China Mechanical Engineering, 2011, 22(24): 2937-2940.
[16]张贤达. 矩阵分析与应用[M]. 北京:清华大学出版社,2004.