强光光学元件加工技术发展

doi:10.3969/j.issn.1004-132X.2020.23.003

摘要/Abstract

摘要： 面向强光光学元件的低损伤制造，概述了关联激光损伤性能的损伤前驱体检测表征方法，提出纳米尺度污染与化学结构缺陷等损伤前驱体是低损伤加工过程需要关注的焦点；结合光学元件加工方法的发展进程，探讨了基于化学辅助磁流变抛光和离子束溅射清洗技术的纳米损伤前驱体的抑制方法，以有效减少纳米级污染和化学结构缺陷；提出强光光学元件制造面临的三个挑战，为实现强光光学元件清洁制造提供参考。

关键词: 光学元件, 辐照损伤, 抛光, 溅射清洗

Abstract: In order to realize low-defect fabrication of optical elements, detection and characterization methods of damage precursors related to laser damage performance were summarized herein. It was proposed that nanoscale damage precursors and chemical structural defects were the focus in low damage fabrication. Combined with the development of optical elements, methods for mitigating nanoscale damage precursor were discussed to effectively decrease nanoscale contaminations and chemical structural defects based on chemical-assisted magnetorheological polishing and ion beam sputtering cleaning technology. Three challenges in low-defect fabrication of optical elements in high fluence were introduced, which might be a reference for the clean manufacturing of optical elements.

Key words: optical element, irradiation damage, polishing, sputtering cleaning

中图分类号:

TH161

戴一帆;钟曜宇;石峰;田野. 强光光学元件加工技术发展[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.23.003.

DAI Yifan;ZHONG Yaoyu;SHI Feng;TIAN Ye. Development of High-light Optical Element Processing Technology[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.23.003.

参考文献

［1］KLINE J L, CALLAHAN D A, GLENZER S H, et al. Hohlraum Energetics Scaling to 520TW on the National Ignition Facility［J］. Physics of Plasmas, 2013, 20(5): 10.1063/1.4803907.

［2］LI Y, YE H, YUAN Z, et al. Generation of Scratches and Their Effects on Laser Damage Performance of Silica Glass［J］. Scientific Reports, 2016, 6: 10.1038/srep34818.

［3］SURATWALA T, STEELE W, WONG L, et al. Chemistry and Formation of the Beilby Layer during Polishing of Fused Silica Glass［J］. Journal of the American Ceramic Society, 2015, 98(8): 2395-2402.

［4］LI C, JU X, JIANG X, et al. High Resolution Characterization of Modifications in Fused Silica after Exposure to Low Fluence 355nm Laser at Different Repetition Frequencies［J］. Optics Express, 2011, 19(7): 6439-6449.

［5］LIU H, HUANG J, WANG F, et al. Subsurface Defects of Fused Silica Optics and Laser Induced Damage at 351nm［J］. Optics Express, 2013, 21(10): 12204-12217.

［6］FEIT M, RUBENCHIK A. Intrinsic Laser-induced Breakdown of Silicate Glasses［J］. Proceedings of SPIE, 2002,4679(10): 321-330.

［7］BUDE J, MILLER P, BAXAMUSA S, et al. High Fluence Laser Damage Precursors and Their Mitigation in Fused Silica［J］. Optics Express, 2014, 22(5): 5839-5851.

［8］PAPERNOV S, SCHMID A W. Laser-induced Surface Damage of Optical Materials: Absorption Sources, Initiation, Growth, and Mitigation［J］. Proceedings of SPIE, 2008, 7132: 10.1117/12.804499.

［9］GAO X, FENG G, CHEN N, et al. Investigation of Laser-induced Damage by Nanoabsorbers at the Surface of Fused Silica［J］. Applied Optics, 2012, 51(51): 2463-2470.

［10］GAO X, FENG G, HAN J, et al. Investigation of Laser-induced Damage by Various Initiators on the Subsurface of Fused Silica［J］. Optics Express, 2012, 20(20): 10.1364/OE.20.022095.

［11］MESSINA F, CANNAS M. Photochemical Generation of E’ centres from Si-H in Amorphous SiO2 under Pulsed Ultraviolet Laser Radiation［J］. Journal of Physics: Condensed Matter, 2006, 18(43): 9967-9973.

［12］GUIZARD S, MARTIN P, PETITE G, et al. Time-resolved Study of Laser-induced Colour Centres in SiO2［J］. Journal of Physics: Condensed Matter., 1996, 8(9): 1281-1290.

［13］ALESSI A, FANETTI M, AGNELLO S, et al. Ge-doped Silica Nanoparticles: Production and Characterization［J］. Optical Materials Express, 2016, 6(7): 2213-2220.

［14］YE X, HUANG J, LIU H, et al. Advanced Mitigation Process (AMP) for Improving Laser Damage Threshold of Fused Silica Optics［J］. Scientific Reports, 2016, 6: 10.1038/srep31111.

［15］VACCARO L, CANANS M, RADZIG V, et al. Luminescence of the Surface Nonbridging Oxygen Hole Center in Silica: Spectral and Decay Properties［J］. Physical Review B, 2008, 78(7): 10.1103/PhysRevB.78.075421.

［16］CHMEL A, ERONKO S B. Optical Strength of Glasses Implanted with Argon Ions［J］. Glass Technology, 1998, 39(1): 32-34.

［17］WONG J, FERRIERA J L, LINDSEY E F, et al. Morphology and Microstructure in Fused Silica Induced by High Fluence Ultraviolet 3w (355 nm) Laser Pulses［J］. Journal of Non-Crystalline Solids, 2006, 352: 255-272.

［18］KUCHEYEV S O, DEMOS S G. Optical Defects Produced in Fused Silica during Laser-induced Breakdown［J］. Appl. Phys. Lett., 2003, 82(19): 3230-3232.

［19］陈习权，祖小涛，郑万国，等. 表面热透镜技术测试光学薄膜特性研究［J］. 光学与光电技术, 2005, 3(1): 53-57.

CHEN Xiquan, ZU Xiaotao, ZHENG Wanguo, et al. Application Research of STL Technique in photoelectric Testing of Thin Film Characterization［J］. Optics & Optoelectronic Technology, 2005, 3(1): 53-57.

［20］胡海洋.光学薄膜强激光热力耦合损伤研究［D］. 上海：中国科学院上海光学精密机械研究所，2001.

HU Haiyang. Study of Laser Induced Damage of Optical Thin Film Coatings［D］. Shanghai: Shanghai Institute of Optics and Fine Mechanics, the Chinese Academy of Sciences, 2001.

［21］SHI F, ZHONG Y, DAI Y, et al. Investigation of Surface Damage Precursor Evolutions and Laser-induced Damage Threshold Improvement Mechanism during Ion Beam Etching of Fused Silica［J］. Optics Express, 2016, 24(18): 20842-20854.

［22］NEAUPORT J, LAMAIGERE L, BERCEGOL H. Polishing-induced Contamination of Fused Silica Optics and Laser Induced Damage Density at 351nm［J］. Optics Express, 2005, 13 (25): 10163-10171.

［23］MENAPACE J A, DAVIS P J, STEELE W A, et al. MRF Applications: Measurement of Process-dependent Subsurface Damage in Optical Materials Using the MRF Wedge Technique［J］. Proceedings of SPIE, 2005, 5991: 39-49.

［24］许乔，王健，马平，等. 先进光学制造技术进展［J］. 强激光与粒子束, 2013, 25(2): 3098-3015.

XU Qiao, WANG Jian, MA Ping, et al. Progress of Advanced Optical Manufacturing Technology［J］. High Power Laser and Particle Beams, 2013, 25(2): 3098-3015.

［25］SHI F, SHU Y, DAI Y, et al. Magnetorheological Elastic Super-smooth Finishing for High-efficiency Manufacturing of Ultraviolet Laser Resistant Optics［J］. Optical Engineering, 2013, 52(7):1-9.

［26］MENAPACE J A. Developing Magnetorheological Finishing (MRF) Technology for the Manufacture of Large-aperture Optics in Megajoule Class Laser Systems［J］. Proceedings of SPIE, 2010, 7842: 10.1117/12.855603.

［27］石峰, 万稳, 戴一帆, 等. 磁流变抛光对熔石英激光损伤特性的影响［J］. 光学精密工程, 2016, 24(12): 2931-2937.

SHI Feng, WAN Wen, DAI Yifan, et al. Effect of Magnetorheological Polishing on Laser Damage Characteristics of Fused Silica［J］.Optics and Precision Engineering, 2016, 24(12): 2931-2937.

［28］隋婷婷，戴一帆，石峰，等. 基于杂质元素控制工艺降低熔石英元件损伤密度实验研究［J］. 航空精密制造技术, 2015, 51(2): 9-12.

SUI Tingting, DAI Yifan, SHI Feng, et al. Experimental Study on Reducing the Damage Density of Fused Silica Element Based on Impurity Element Control Technology［J］. Aviation Precision Manufacturing Technology, 2015, 51(2)：9-12.

［29］SURATWALA K T, WONG L, MILLER P, et al. Sub-surface Mechanical Damage Distributions during Grinding of Fused Silica［J］. Journal of Non-Crystalline Solids, 2006, 352(52/54): 5601-5617.

［30］WONG L, SURATWALA T, FEIT M D, et al. The Effect of HF-NH4F Etching on the Morphology of Surface Fractures on Fused Silica［J］. Journal of Non-Crystalline Solids, 2009, 355: 797-810.

［31］FEIT M D, SURATWALA T I, WONG L L, et al. Modeling Wet Chemical Etching of Surface Flaws on Fused Silica［J］. Proceedings of SPIE, 2009, 7504: 10.1117/12.836912.

［32］ZHENG Z, ZU X, JIANG X, et al. Effect of HF Etching on the Surface Quality and Laser-induced Damage of Fused Silica［J］. Optics & Laser Technology, 2012, 44: 1039-1042.

［33］王凤蕊, 郑直, 刘红婕, 等. HF酸刻蚀提升熔石英亚表面划痕抗损伤性能的机理［J］. 光子学报, 2012, 41(3): 523-527.

WANG Fengrui, ZHENG Zhi, LIU Hongjie, et al. Mechanism of Improving Scratch Resistance of Fused Quartz Sub Surface by HF Acid Etching［J］. Acta Photonica Sinica, 2012, 41(3): 523-527.

［34］YAMAUCHI K, HIROSE K, GOTO H, et al. First-principles Simulation of Removal Process in EEM(Elastic Emission Maching)［J］. Computation Materials Science, 1999, 14: 232-235.

［35］SHIMIZU J, ZHOU L, YAMAMOTO T. Molecular Dynamics Simulation of Chemical Reaction Assisted Grinding of Silicon Wafer by Controlling Interatomic Potential Parameters［J］. Journal of Computational and Theoretical Nanoscience, 2010, 7:1-6.

［36］SONG X Z, ZHANG Y, ZHANG F H. Study on Removal Mechanism of Nanoparticle Colloid Jet Machining［J］. Advanced Materials Research, 2008, 53/54: 363-368.

［37］LIAO W, DAI Y, LIU Z, et al. Detailed Subsurface Damage Measurement and Efficient Damage-free Fabrication of Fused Silica Optics Assisted by Ion Beam Sputtering［J］. Optics Express, 2016, 24(4): 4247-4257.

［38］KAMIMURA T, AKAMATSU S, YAMAMOTO M, et al. Enhancement of Surface-damage Resistance by Removing a Subsurface Damage in Fused Silica［J］. Proceedings of SPIE, 2004, 5273: 244-249.

［39］YAN Z, LIAO W, ZHANG Y, et al. Optical Characterization and Laser Damage of Fused Silica Optics after Ion Beam Sputtering［J］. Optik, 2014, 125: 756-760.

［40］CHEN S, LI S, PENG X, et al. Research of Polishing Process to Control the Iron Contamination on the Magnetorheological Finished KDP Crystal Surface［J］. Applied Optics, 2015, 54(6): 1478-1484.

［41］XU M, DAI Y, ZHOU L, et al. Investigation of Surface Characteristics Evolution and Laser Damage Performance of Fused Silica during Ion-beam Sputtering［J］. Optical Materials, 2016, 58:151-157.

［42］ZHONG Y, DAI Y, SHI F, et al. Effects of Ion Beam Etching on the Nanoscale Damage Precursor Evolution of Fused Silica［J］. Materials, 2020, 13: 10.3390/ma13061294.

［43］SUN L, LIU H, HUANG J, et al. Reaction Ion Etching Process for Improving Laser Damage Resistance of Fused Silica Optical Surface［J］. Optics Express, 2016, 24(1): 199-211.

［44］XU M, SHI F, ZHOU L, et al. Investigation of Laser-induced Damage Threshold Improvement Mechanism during Ion Beam Sputtering of Fused Silica［J］. Optics Express, 2017, 25(23): 29260-29271.

[1]	邓乾发;郑涛;袁巨龙;王旭;张学良;吕冰海. 介电泳效应磨粒流抛光中的电极形态[J]. 中国机械工程, 2020, 31(23): 2822-2828.
[2]	郑子军;薛凯元;文东辉;徐耀耀;应富强. 线性液动压抛光加工的流体动压特性研究[J]. 中国机械工程, 2020, 31(08): 907-914.
[3]	黄智1;吴湘1,2;刘海涛2;万勇建2;郑晓2;陈祥1. 机器人恒压球形公自转磨头抛光技术研究[J]. 中国机械工程, 2020, 31(05): 519-526.
[4]	何艳;苑泽伟;段振云;王雪. 单晶SiC的电助光催化抛光及去除机理[J]. 中国机械工程, 2020, 31(04): 403-409.
[5]	李庆忠;孙苏磊;李强强. 单晶硅同质互抛实验研究[J]. 中国机械工程, 2019, 30(23): 2773-2777.
[6]	姚蔚峰1;袁巨龙2;钟美鹏3;王成武4;周芬芬5. 圆柱滚子外圆精密加工技术综述[J]. 中国机械工程, 2019, 30(10): 1195-1206.
[7]	郑子军;李攀星;蔡东海;文东辉. 液动压悬浮抛光流场的数值模拟及抛光工具盘结构优化[J]. 中国机械工程, 2019, 30(06): 638-643.
[8]	袁巨龙1，3，4;毛美姣1，2;李敏1，3，4;刘舜2;吴锋2;胡自化2;秦长江2. 基于响应曲面法的YG8硬质合金刀片化学机械抛光工艺参数优化[J]. 中国机械工程, 2018, 29(19): 2290-2297.
[9]	姚蔚峰1;袁巨龙2;江亮3;冯凯萍4;陈锋5. 偏心运动双平面超精研抛圆柱面研究[J]. 中国机械工程, 2018, 29(19): 2327-2334.
[10]	徐志强1，2;尹韶辉3;姜胜强1，2;朱科军1，2. 在线电解修整磨削与化学机械抛光相结合的蓝宝石基片组合加工技术[J]. 中国机械工程, 2018, 29(11): 1310-1315.
[11]	陈铁牛;郭钟宁;曾柏文;印四华. 激光诱导空泡微孔抛光机理及实验研究[J]. 中国机械工程, 2018, 29(03): 273-278,285.
[12]	刘薇娜, 蔡智杰, 李云峰, 任成祖. 喷油嘴微孔磨粒流抛光数值模拟与试验[J]. 中国机械工程, 2017, 28(01): 13-19,26.
[13]	刘建春, 陈雄风, 廖妮兰. 小型异构件抛光机运动系统分析[J]. 中国机械工程, 2016, 27(08): 1039-1042,1052.
[14]	陈逢军, 苗想亮, 唐宇, 尹韶辉. 磨料液体射流抛光技术研究进展[J]. 中国机械工程, 2015, 26(22): 3116-3123.
[15]	黄亦申1;赵彬善1,2;黄水泉1;游红武1; 许雪峰1. 脉冲磁场辅助磁性复合磨粒化学机械抛光技术及其加工试验研究[J]. 中国机械工程, 2014, 25(9): 1175-1179,1238.