[1]徐滨士.新时代中国特色再制造的创新发展[J].中国表面工程,2018,31(1):1-6.
XU Binshi. Innovative Development of Remanufacturing with Chinese Characteristics in the New Era [J]. China Surface Engineering, 2018, 31(1):1-6.
[2]刘光复,刘涛,柯庆镝,等.基于博弈论及神经网络的主动再制造时间区域抉择方法研究[J].机械工程学报,2013,49(7):29-35.
LIU Guangfu, LIU Tao, KE Qingdi, et al. Study on Regional Decision Method of Predecisional Remanufacturing Time Based on Game Theory and Neural Network [J]. Journal of Mechanical Engineering, 2013, 49(7):29-35.
[3]宋守许,冯艳,柯庆镝,等.基于寿命匹配的零部件再制造优化设计方法[J].中国机械工程,2015,26(10):1323-1329.
SONG Shouxu, FENG Yan, KE Qingdi, et al. Optimal Design Method for Remanufacturing Components Based on Life Matching [J]. China Mechanical Engineering, 2015, 26(10):1323-1329.
[4]邱权.面向主动再制造的产品层寿命匹配方法研究[D].合肥:合肥工业大学,2019.
QIU Quan. Research on the Matching Method of Product Layer Life for Predecisional Remanufacturing[D]. Hefei:Hefei University of Technology, 2019.
[5]王玉琳,胡锦强,柯庆镝,等.基于轴心轨迹特征的发动机曲轴再制造性分析方法[J].中国机械工程,2017,28(13):1601-1607.
WANG Yulin, HU Jinqiang, KE Qingdi, et al. Remanufacturability Analysis Method of Engine Crankshaft Based on Axial Trajectory Characteristics[J]. China Mechanical Engineering, 2017, 28(13):1601-1607.
[6]宋守许,邱权,卜建,等.基于疲劳与磨损的曲轴主动再制造时机选择[J].计算机集成制造系统,2020,26(2):279-287.
SONG Shouxu, QIU Quan, BU Jian, et al. Based on the Predecisional Remanufacturing Fatigue and Wear of the Crankshaft Timing [J]. Computer Integrated Manufacturing System, 2020,26(2):279-287.
[7]柯庆镝,王辉,宋守许,等.产品全生命周期主动再制造时域抉择方法[J].机械工程学报,2017,53(11):134-143.
KE Qingdi, WANG Hui, SONG Shouxu, et al. Time-domain Selection Method for Predecisional Remanufacturing Throughout Product Life Cycle [J]. Journal of Mechanical Engineering, 2017, 53(11):134-143.
[8]高旺. 重卡发动机主动再制造最佳时机点选择方法[D].大连:大连理工大学,2017.
GAO Wang. Optimal Point Selection Method for Predecisional Remanufacturing of Heavy-truck Engines [D]. Dalian:Dalian University of Technology, 2017.
[9]曹燕,张军田,王巍,等.高铬铸钢轧辊热疲劳过程的组织和性能[J].东北大学学报(自然科学版),2011,32(10):1414-1417.
CAO Yan, ZHANG Juntian, WANG Wei, et al. Microstructure and Performance of High Chromium Cast Steel Roller Thermal Fatigue Process[J]. Journal of Northeastern University (Natural Science Edition), 2011, 32(10):1414-1417.
[10]KIM C K , PARK J I , RYU J H , et al. Correlation of Microstructure and Thermal-fatigue Properties of Centrifugally Cast High-speed Steel Rolls[J]. Metallurgical and Materials Transactions A, 2004, 35(2):481-492.
[11]LI C S, LIU X H, XU J Z, et al. FEM Analysis of Stress on Roll Surface Black Oxide Layers Exfoliation in Hot Strip Rolling[J]. Journal of Materials Engineering & Performance, 2002,11(2):215-219.
[12]FROLISH M F, FLETCHER D I, BEYNON J H.A Quantitative Model for Predicting the Morphology of Surface Initiated Rolling Contact Fatigue Cracks in Back-up Roll Steels[J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(11):1073-1086.
[13]ZHOU Li, SUN Dale, LIU Changsheng, et al. Fatigue Behavior of High Speed Steel Roll Materials for Hot Rolling by Laser Impacting[J]. Journal of Iron and Steel Research International, 2006,13(6):49-52.
[14]MERCADO-SOLIS R D, BEYNON J H. Simulation of Thermal Fatigue in Hot Strip Mill Work Rolls[J]. Scandinavian Journal of Metallurgy, 2010, 34(3):175-191.
[15]RYU J H, RYU H B. Effect of Thermal Fatigue Property of Hot Strip Mill Work Roll Materials on the Rolled-in Defects in the Ultra-low Carbon Steel Strips[J].ISIJ International, 2003,43(7):1036-1039.
[16]ZHOU S X. An Integrated Model for Hot Rolling of Steel Strips[J]. Journal of Materials Processing Technology, 2003, 134(3):338-351.
[17]赵雪芹,王文健,钟雯,等.钢轨滚动疲劳裂纹与磨损耦合关系研究[J].铁道学报,2009,31(2):84-87.
ZHAO Xueqin, WANG Wenjian, ZHONG Wen, et al. Study on the Coupling Relationship between Rolling Fatigue Cracks and Wear in Rail[J]. Journal of Railway Science, 2009, 31(2):84-87.
[18]PATEL S, GOHIL A V. Wheel Rail Contact Fatigue[J]. International Journal of Engineering Research and Applications,2013,23(2):980-983.
[19]王爱民. 机械可靠性设计 [M]. 北京:北京理工大学出版社, 2015:105-109.
WANG Aimin. Mechanical Reliability Design[M]. Beijing:Beijing Institute of Technology Press, 2015:105-109. |