Correction Model and Experimental Study of Removal Rate in Tangential Cylindrical Grinding Based on Grinding Thermal Deformation Analysis

doi:10.3969/j.issn.1004-132X.2023.15.002

Abstract

Abstract: In order to solve the problem in plunge type cylinder grinding caused by the traditional grinding removal efficiency model of grinding thermal deformation is different from the actual grinding， the traditional grinding removal efficiency model was modified based on the analysis of grinding thermal deformation mechanism. By analyzing the grinding thermal deformation and thermal deformation rate of grinding wheel and workpiece， the correction function was determined， the material removal efficiency correction model based on the thermal deformation was established. The model was verified by grinding experiment， and the results show that the model has higher accuracy.

Key words: plunge type cylindrical grinding, thermal deformation, material removal rate, experimental study

摘要： 为解决切入式外圆磨削加工中磨削热变形引起的传统磨削去除率模型与实际磨削偏差较大的问题，基于磨削热变形机理分析，对传统切入式外圆磨削去除率模型进行了修正。通过分析切入式外圆磨削过程中砂轮与工件的磨削热变形量及热变形速率，确定了修正函数，建立了基于磨削热变形的切入式外圆磨削材料去除率修正模型，并通过磨削实验对模型进行了验证。结果表明，修正模型具有更高的准确性。

关键词: 切入式外圆磨削, 热变形, 材料去除率, 实验研究

CLC Number:

TH161

CHI Yulun, WU Zixuan. Correction Model and Experimental Study of Removal Rate in Tangential Cylindrical Grinding Based on Grinding Thermal Deformation Analysis[J]. China Mechanical Engineering, 2023, 34(15): 1778-1788.

迟玉伦, 武子轩. 基于磨削热变形分析的切入式外圆磨削去除率的修正模型与实验研究[J]. 中国机械工程, 2023, 34(15): 1778-1788.

References

［1］迟玉伦，李郝林. 基于时间常数外圆切入磨削砂轮钝化的监测方法［J］. 中国机械工程， 2016， 27（2）：209-214.
CHI Yulun， LI Haolin. Monitoring Method of Grinding Wheel Passivation Based on Time Constant Cylindrical Cutting［J］. China Mechanical Engineering， 2016， 27（2）：209-214.
［2］朱峰，曹硕生，雷力生. 外圆切入磨削加工精度的研究［J］. 机械工程学报， 1993， 29（5）：104-109.
ZHU Feng， CAO Shuosheng， LEI Lisheng. Study on Machining Accuracy of Cylindrical Plunge Grinding［J］. Chinese Journal of Mechanical Engineering， 1993， 29（5）：104-109.
［3］DING Zishan， JIANG Xiaohui， GUO Miaoxiao， et al. Investigation of the Grinding Temperature and Energy Partition during Cylindrical Grinding［J］. The International Journal of Advanced Manufacturing Technology， 2018， 97：1767-1778.
［4］ZHAO A Z， QIAN N. Prole Grinding of DZ125 Nickel-based Superalloy：Grinding Heat， Temperature Field， and Surface Quality［J］. Journal of Manufacturing Processes， 2020， 57：10-22.
［5］CHOI T J， SUBRAHMANYA N， LI H， et al. Comprehensive Analysis of the Thermal Impact and Its Depth Effect in Grinding［J］. CIRP Annals—Manufacturing Technology， 2008， 48（1）：61-72.
［6］WANG C， CHEN J. Study on Brittle Material Removal in the Grinding Process Utilizing Theoretical Analysis and Numerical Simulation［J］. The International Journal of Advanced Manufacturing Technology， 2016， 87：2603-2614.
［7］MARSHE R， MOERLEIN A W， DEAKYNE T R S， et al. In-process Measurement of Form Error and Force in Cylindrical-plunge Grinding［J］. Precision Engineering， 2008， 32（4）：348-352.
［8］姜晨，李郝林，麦云飞. 基于声发射信号的外圆切入磨削去除率监测［J］. 中国机械工程， 2013， 24（22）：2992-2996.
JIANG Chen， LI Haolin， MAI Yunfei. Monitoring the Removal Rate of Cylindrical Plunge Grinding Based on Acoustic Emission Signal［J］. China Mechanical Engineering， 2013， 24（22）：2992-2996.
［9］CHI Y， GU J， LI H. Optimization of Internal Plunge Grinding Using Collaboration of the Air-grinding and the Material Removal Model Based on the Power Signal［J］. The International Journal of Advanced Manufacturing Technology， 2019， 105：247-264.
［10］GUPTA R， SEKHON G. Stress due to a Moving Band Source of Heat and Mechanical Load on the Work Surface during Grinding［J］. Journal of Materials Processing Technology， 1997， 70：274-278.
［11］MLLERU， PRINZ S. Analysis of the Thermo-mechanical Load and Productivity during Force-compliant Grinding of pcBN［J］. Journal of Materials Processing Technology， 2022， 305：117604.
［12］HEINZEL C， HEINZEL J. Comprehensive Analysis of the Thermal Impact and Its Depth Effect in Grinding［J］. CIRP Annals—Manufacturing Technology， 2021， 70：289-292.
［13］李征，丁文锋，周欢. 基于混合材料模型的颗粒增强钛基复材高速磨削温度研究［J］. 机械工程学报， 2019， 55（21）：186-198.
LI Zheng， DING Wenfeng， ZHOU Huan， et al. Study on High Speed Grinding Temperature of Particle Reinforced Titanium Matrix Composites Based on Mixed Material Model［J］. Journal of Mechanical Engineering， 2019， 55（21）：186-198.
［14］CHI Yulun， LI Haolin， CHEN Xun. In-process Monitoring and Analysis of Bearing Outer Race Way Grinding Based on the Power Signal［J］. Proceedings of the Institution of Mechanical Engineers， 2017， 231（14）：2622-2635.
［15］MAHATA S， SHAKYA P， BABU N R， et al. In-process Characterization of Surface Finish in Cylindrical Grinding Process Using Vibration and Power Signals［J］. Procedia CIRP， 2020， 88：335-340.
［16］MARSH E R， MOERLEIN A W， DEAKYNE T R S， et al. In-process Measurement of Form Error and Force in Cylindrical-plunge Grinding［J］. Precis Eng. ， 2008， 32（4）：348-352.
［17］JAMSHIDI H， BUDAK E. Grinding Temperature Modeling Based on a Time Dependent Heat Source［J］. Procedia CIRP， 2018， 77：299-302.
［18］CHEN X， ROWE W B， MILLS B， et al. Analysis and Simulation of the Grinding Process. Part Ⅲ. Comparison with Experiment［J］. International Journal of Machine Tools and Manufacture， 1996， 36（8）：897-906.
［19］HECKERR L， LIANG S Y， XIAO Jianwu， et al. Grinding Force and Power Modeling Based on Chip Thickness Anlaysis［J］. Int. J. Adv. Manuf. Technol. ， 2007， 33（5/6）：449-459.
［20］TAWAKOLI T. Developments in Grinding Process Monitoring and Evaluation of Results［J］. Int. J. Mechatronics and Manufacturing Systems， 2008， 4（1）：307-320.
［21］SUN L， YANG S. A New Model of Grinding Forces Prediction for Machining Brittle and Hard Materials［J］. Procedia CIRP， 2015， 27：192-197.
［22］迟玉伦. 基于功率信号的切入式磨削工艺优化关键技术研究［D］. 上海：上海理工大学， 2016.
CHI Yulun. Research onKey Technology of Cutting-in Grinding Process Optimization Based on Power Signal［D］. Shanghai：University of Shanghai for Science and Technology， 2016.

[1]	LI Hongyu, HUANG Xiangming, MING Yang, LI Xiyang, ZENG Qing, ZHOU Dongdong. Simulation and Experimental Study of Magnetic Field-assisted Shear Thickening Fluid Polishing for Cemented Carbide Blades [J]. China Mechanical Engineering, 2023, 34(06): 650-659.
[2]	YANG Heran, HE Yuan, SUN Xingwei, DONG Zhixu, QIAO Heting. Development of Belt Grinding Devices for Screw Rotor and Prediction of Material Removal Rates [J]. China Mechanical Engineering, 2021, 32(17): 2055-2062.
[3]	WU Ke, LU Xinming, MEHMOOD Awais, ZHOU Libo, YUAN Julong. Fixed Abrasive Based Self-rotation Grinding for Single Crystal Sapphire [J]. China Mechanical Engineering, 2021, 32(16): 2002-2007，2015.
[4]	LONG Jiangqi1;LIN Jian1;CHEN Xianbing2;WANG Zining2. Sensitivity of Structural Parameters of Ventilated Brake Disc to Brake Jitters [J]. China Mechanical Engineering, 2020, 31(24): 2966-2971.
[5]	LI Junliang;WANG Shilong;WANG Sibao;XIA Changjiu. Energy Consumption Model of Hobbing Machine Tools Based on Workpiece Material Removal Rate [J]. China Mechanical Engineering, 2020, 31(21): 2626-2631.
[6]	XI Fengfei;ZENG Xi;JI Shiming;CHEN Guoda. Cobalt-based Alloy Material Removing Method under Photocatalytic Conditions [J]. China Mechanical Engineering, 2020, 31(06): 662-669.
[7]	MIAO Enming;WEI Xinyuan;LIU Hui;PAN Qiaosheng. Modeling of Thermal Deformation Predictions for Array Planes of APARs [J]. China Mechanical Engineering, 2018, 29(19): 2342-2346.
[8]	WU Yongwei;WU Zaixin;BAO Zhenwei. Thermal Characteristics Analysis and Structural Optimization of Horizontal HMC500 Spindle Systems [J]. China Mechanical Engineering, 2018, 29(13): 1596-1602.
[9]	Hu Fengfeng, Sun Yu, Peng Binbin, Li Yejian. Analysis for Influences of Thermal Deformation on Kinematic Accuracy of Slider on Multi-link Punch Press [J]. China Mechanical Engineering, 2016, 27(14): 1847-1851.
[10]	Zhang Haifeng, Wang Lifeng, Liu Jianyong. Experimental Study of EDM Pulse Generator for Small Hole Machining [J]. China Mechanical Engineering, 2016, 27(13): 1735-1739,1789.
[11]	Gu Yongxia, Zhang Yuling, Zhao Jieliang, Yan Shaoze. Advances on Dynamics Modeling and Experimental Studies for Flexible Manipulators [J]. China Mechanical Engineering, 2016, 27(12): 1694-1703.
[12]	Xue Rongyuan, Liu Zhidong, Wang Xiangzhi, Qiu Mingbo, Tian Zongjun. Research on Titanium Alloy TC4 Electrical-discharge Machining Characteristics Using Oil-in-water Emulsion [J]. China Mechanical Engineering, 2014, 25(9): 1164-1168.
[13]	Huang Yishen, Zhao Bingshan, Huang Shuiquan, You Hongwu, Xu Xuefeng. Pulse Electromagnetic Field-assisted Chemical Mechanical Polishing Utilizing Magnetic Composite Abrasives Slurry and Its Polishing Performance [J]. China Mechanical Engineering, 2014, 25(9): 1175-1179,1238.
[14]	Yuan Qilong, Li Yan, Yang Mingshun, Li Yuxi. Research on Deforming Force of Slab Cold Roll-beating [J]. China Mechanical Engineering, 2014, 25(2): 251-256.
[15]	Miao Enming, Xu Zhishang, Zhou Xiaoshuai, Ni Yang. Mechanism Analysis and Experimental Validation of Dissimilarity of Mechanical Thermal Deformation [J]. China Mechanical Engineering, 2014, 25(14): 1956-1959,1966.