[1]MASJEDI M, KHONSARI M M. On the Effect of Surface Roughness in Point-contact EHL: Formulas for Film Thickness and Asperity Load[J]. Tribology International, 2015,82:228-244.
[2]贾小攀,王文中,赵自强,等. 斜齿轮弹流润滑下的接触疲劳寿命计算[J]. 摩擦学学报,2014,34(1):8-14.
JIA Xiaopan, WANG Wenzhong, ZHAO Ziqiang, et al. A Contact Fatigue Model of Helical Gear under Elastohydrodynamic Lubrication[J]. Tribology, 2014, 34 (1):8-14.
[3]樊瑜瑾, 余贵华, 纳铿.表面形貌的微观弹流效应研究[J].润滑与密封,1999(2):53-54.
FAN Yujin,YU Guihua,NA Keng. A Study of Micro-EHD in Point Contacts[J]. Lubrication Engineering,1999(2):53-54.
[4]HU Yuanzhong,BARBER G C,ZHU Dong,et al. A Study on an FFT-based Approach for Fast Estimation of Pressure Distribution in Point EHL Contacts of Rough Surfaces[J]. Tribology Transactions,2001,44(1):59-69.
[5]PERKAP,KUPKA I,HARTL M. Prediction of Real Rough Surface Deformation in Pure Rolling EHL Contact: Comparison with Experiment[J]. Tribology Transactions,2012,55(5):698-704.
[6]International Organization for Standardization.ISO 281 Rolling Bearings-Dynamic Load Rating and Rating Life[S].Geneva:ISO Copyright Office, 2007.
[7]HEEMSKERK R. EHD Lubrication in Rolling Bearings-review of Theory and Influence on Fatigue Life[J].Estratto da Tribologia e Lubrificazione,1980,4:3-7.
[8]孙军,王震华,桂长林. 计入曲轴受载变形的粗糙表面曲轴轴承弹性流体动力润滑分析[J]. 机械工程学报, 2009,45(1):135-140.
SUN Jun,WANG Zhenhua,GUI Changlin. Elastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load and Roughness Surface[J]. Chinese Journal of Mechanical Engineering,2009,45(1):135-140.
[9]HOOKE C J,LI K Y,MORALES-ESPEJEL G. Rapid Calculation of the Pressures and Clearances in Rough, Rolling-sliding Elastohydrodynamically Lubricated Contacts. Part 1: Low-amplitude, Sinusoidal Roughness[J]. Proceedings of the Institution of Mechanical Engineers,Part C,2007,220(6):915-925.
[10]VENNER C H,COUHIER F,LUBRECHT A A,et al. Amplitude Reduction of Waviness in Transient EHL Line Contacts[J]. Tribology Series,1997,32:103-112.
[11]董帮源,刘小君,王静,等. 表面织构对重载线接触条件下40Cr钢摩擦性能的影响[J]. 摩擦学学报, 2016,36(2):145-152.
DONG Bangyuan,LIU Xiaojun,WANG Jing,et al. Effect of Textured Surface on the Frictional Property of 40Cr Steel under High Load and Line Contact[J]. Tribology,2016,36(2):145-152.
[12]李杨,刘小君,王庆生,等. 线接触状态下激光加工微造型表面摩擦特性研究[J]. 摩擦学学报,2013,33(4):349-356.
LI Yang,LIU Xiaojun,WANG Qingsheng,et al. Effect of Laser Textured Surface on the Frictional Property in Line Contact[J]. Tribology,2013,33(4):349-356.
[13]GACHOT C,ROSENKRANZ A,HSU S M,et al. A Critical Assessment of Surface Texturing for Friction and Wear Improvement[J]. Wear,2017,372/373:21-41.
[14]KUPKA I,HARTL M. The Effect of Surface Texturing on Thin EHD Lubrication Films[J].Tribology International,2007,40(7):1100-1110.
[15]International Organization for Standardization.ISO 25178-2-2012 Geometrical Product Specifications (GPS)-Surface Texture: Areal-Part2: Terms,Definitions and Surface Texture Parameters[S].Geneva:ISO Copyright Office,2012.
[16]刘泽九.滚动轴承应用手册[M].北京:机械工业出版社,2014:335.
LIU Zejiu. Application Reference Manual of Rolling Ellement Bearing[M]. Beijing:China Machine Press,2014:335.