Transient Start-up Dynamics Model and Sealing Performance of Single Metal Seals in Cone Bits
MA Yi1,2;CHEN Yutao1;MENG Xiangkai1,2;ZHAO Wenjing1,2;PENG Xudong1,2
1.College of Mechanical Engineering,Zhejiang University of Technology,Hangzhou,310023
2.Engineering Research Center of Process Equipment and Remanufacturing,Ministry of Education,Hangzhou,310023
MA Yi, CHEN Yutao, MENG Xiangkai, ZHAO Wenjing, PENG Xudong, . Transient Start-up Dynamics Model and Sealing Performance of Single Metal Seals in Cone Bits[J]. China Mechanical Engineering, 2022, 33(07): 777-785.
[1]朱才朝, 谢永春, 秦大同, 等. 牙轮钻头纵向横向扭转振动动力学仿真研究[J]. 机械工程学报, 2002, 38(2):69-74.
ZHU Caichao, XIE Yongchun, QIN Datong, et al. Study on Dynamic Action of Integrated Drill String-bit System[J]. Journal of Mechanical Engineering, 2002, 38(2):69-74.
[2]KESSAI I, BENAMMAR S, DOGHMANE M Z, et al. Drill Bit Deformations in Rotary Drilling Systems under Large-amplitude Stick-slip Vibrations[J]. Applied Science-Basel, 2020, 10(18):6523.
[3]高岩. 三牙轮钻头钻进时钻柱轴向振动的特征[J]. 石油学报, 2000, 21(6):93-96.
GAO Yan. Characteristics of Axial Vibration of Drill String during Drilling with Three-cone Bit[J]. Acta Petrolei Sinica, 2000, 21(6):93-96.
[4]LIN C. Oil and Gas Drilling Bit Tribology, Encyclopedia of Tribology[M]. New York:Springer, 2013.
[5]张毅, 常学平, 付玉坤, 等. 钻井工况下单金属密封接触分析及实验研究[J]. 中国机械工程, 2018, 29(3):262-266.
ZHANG Yi, CHANG Xueping, FU Yukun, et al. Analysis and Experimental Research of Contact States of Single Metal Seal under Drilling Conditions[J]. China Mechanical Engineering, 2018, 29(3):262-266.
[6]ZHANG Yi, ZHANG Xiaodong, YANG Lin, et al. Optimization Design for Downhole Dynamic Seal Based on Response Surface Method[J]. Advances in Mechanical Engineering, 2019, 11(2):1-10.
[7]ZHOU Yi, HUANG Zhiqiang, TAN Li, et al. Cone Bit Bearing Seal Failure Analysis Based on the Finite Element Analysis[J]. Engineering Failure Analysis, 2014, 45(10):292-299.
[8]ZHANG Jie, HU Yang. Mechanical Behavior and Sealing Performance of Metal Sealing System in Roller Cone Bits[J]. Journal of Mechanical Science and Technology, 2019, 33(10):2855-2862.
[9]马艺, 倪洋, 孟祥铠, 等. 牙轮钻头用单金属密封热-流-固耦合模型与性能分析[J]. 中国机械工程, 2020, 31(19):2295-2303.
MA Yi, NI Yang, MENG Xiangkai, et al. Thermal-fluid-solid Coupling Model and Performance Analysis of Single Metal Seals in Cone Bits[J]. China Mechanical Engineering, 2020, 31(19):2295-2303.
[10]XIONG S, SALANT R F. A Non-axisymmetric Steady State Model of a Mechanical Seal for Down-hole Tools[J]. Journal of Tribology, 2002, 124(1):144-150.
[11]XIONG S, SALANT R F. A Dynamic Model of a Contacting Mechanical Seal for Down-hole Tools[J]. Journal of Tribology, 2003, 125(3):391-402.
[12]GREEN I, BAIR S. Dynamic Response to Axial Oscillation and Rotating Seat Runout in Contacting Mechanical Face Seals[J]. Tribology Transactions, 1991, 34(2):169-176.
[13]孟祥铠, 彭旭东, 王乐勤. 瞬态启停机械密封轴对称动力学模型与密封行为分析[J]. 化工学报, 2011, 62(6):1620-1625.
MENG Xiangkai, PENG Xudong, WANG Leqin. Axisymmetric Dynamic Model and Seal Behavior Analysis of Mechanical Seals during Startup and Shutdown Operation[J]. Journal of Chemical Engineering, 2011, 62(6):1620-1625.
[14]徐鲁帅, 王赟磊, 张帆, 等. 扰变工况下不同表面结构机械密封瞬态特性分析[J]. 西安交通大学学报, 2020, 54(1):56-63.
XU Lushuai, WANG Yunlei, ZHANG Fan, et al. Transient Characteristics of Mechanical Seals with Different Surface Structures under Disturbance Conditions[J]. Journal of Xian Jiaotong University, 2020, 54(1):56-63.
[15]罗纬, 何其翔, 刘剑. 牙轮钻头金属浮动密封研究及设计[J]. 石油机械, 1994, 12(22):16-19.
LUO Wei, HE Qixiang, LIU Jian. Research and Design of Metal Floating Seal for Roller Bit[J]. Petroleum Machinery, 1994, 12(22):16-19.
[16]CUI Shuhui, GU Le, FILLON M, et al. The Effects of Surface Roughness on the Transient Characteristics of Hydrodynamic Cylindrical Bearings during Startup[J]. Tribology International, 2018, 128(12):421-428.
[17]XIONG S. Numerical Model of a Rock Bit Bearing Seal[D]. Atlanta:Georgia Institute of Technology, 2001.
[18]RUAN B, SALANT R F, GREEN I. A Mixed Lubrication Model of Liquid/Gas Mechanical Face Seals[J]. Tribology Transactions, 1997, 40(4):647-657.
[19]陈源, 江锦波, 彭旭东, 等. 干气密封力学系统动态性能及其影响因素间的交互作用分析[J]. 摩擦学学报, 2019, 39(3):269-278.
CHEN Yuan, JIANG Jinbo, PENG Xudong, et al. Dynamic Performance of Dry Gas Seals and Analysis of Interactions among Its Influencing Factors[J]. Tribology, 2019, 39(3):269-278.
[20]张雄, 王天舒, 刘岩. 计算动力学[M].2版. 北京:清华大学出版社, 2015.
ZHANG Xiong, WANG Tianshu, LIU Yan. Computational Dynamics[M].2nd ed. Beijiang:Tsinghua University Press, 2015.
[21]GREEN I, ETSION I. Pressure and Squeeze Effects on the Dynamic Characteristics of Elastomer O-rings under Small Reciprocating Motion[J]. Journal of Tribology, 1986, 108(3):439-445.
[22]XUE Bing, WEI Chao, HU Jinbin. Study of Separation Characteristics of Micro-groove Rotary Seal Considering Different Cavitation Boundary Conditions[J]. Tribology Letters, 2017, 65(4):119.
[23]张绪猛. 船用机械密封的动态特性研究[D]. 武汉:武汉理工大学, 2008.
ZHANG Xumeng. Study on Dynamic Characteristics of Marine Mechanical Seal [D]. Wuhan:Wuhan University of Technology, 2008.