[1]厉虹, 白少先. 低压螺旋槽上游泵送气体端面密封零泄漏特性[J]. 润滑与密封, 2017, 42(3):59-64.
LI Hong, BAI Shaoxian. Performance of Zero-leakage Upstream Pumping Gas Spiral Groove Face Seals Operating at Low Pressure[J]. Lubrication Engineering, 2017, 42(3):59-64.
[2]王涛,黄伟峰,王玉明. 机械密封液膜汽化问题研究 现状与进展[J]. 化工学报,2012,63(11):3376-3382.
WANG Tao, HUANG Weifeng, WANG Yuming. Research and Progress of Mechanical Seals Operating with Vaporization Transition[J]. CIESC Journal, 2012, 63(11):3376-3382.
[3]LEBECK A O. A Mixed Friction Hydrostatic Face Seal Model with Phase Change[J]. Journal of Tribology, 1980, 102(2):133-138.
[4]HUGHES W F, WINOWICH N S, BIRCHAK M J, et al. Phase Change in Liquid Face Seals[J]. Journal of Tribology, 1978, 100(1):74-80.
[5]BASU P, HUGHES W F, BEELER R M. Centrifugal Inertia Effects in Two Phase Face Seal Films[J]. Tribology Transactions, 1987, 30(2):177-186.
[6]BEATTY P A, HUGHES W F. Turbulent Two-phase Flow in Face Shaft Seals[J]. Journal of Tribology, 1987, 109(1):91-99.
[7]LAU S Y,HUGHES W F,BASU P,et al. A Simplified Model for Two Phase Face Seal Design[J]. Tribology Transactions, 1990, 33(3):315-324.
[8]YASUNA J A, HUGHES W F. A Continuous Boiling Model for Face Seals[J]. Journal of Tribology, 1990, 112(2):266-274.
[9]ETSION I, PASCOVICI M D. Hydrodynamic Effects on the Boiling Interface in a Misaligned Two-phase Mechanical Seal:a Qualitative Study[J].Tribology Transactions, 1996, 39(4):922-928.
[10]ETSION I, PASCOVICI M D. Phase Change in a Misaligned Mechanical Face Seal[J]. Journal of Tribology, 1996, 118(1):109-115.
[11]ETSION I, PASCOVICI M D, BURSTEIN L. The Boiling Interface in a Misaligned Two-phase Mechanical Seal[J]. Journal of Tribology, 1997, 119(2):265-272.
[12]ROUILLON M,BRUNETIERE N. Spiral Groove Face Seal Behavior and Performance in Liquid Lubricated Applications[J]. Tribology Transactions, 2018, 61(6):1048-1056.
[13]陈汇龙,王彬,任坤腾,等. 空化热效应对上游泵送机械密封润滑性能的影响[J]. 化工学报,2016,67(10):4334-4343.
CHEN Huilong, WANG Bin, REN Kunteng, et al. Influence of Cavitation Thermal Effect on Lubrication Properties of Upstream Pumping Mechanical Seal[J]. CIESC Journal, 2016, 67(10):4334-4343.
[14]CHEN Huilong, WU Qiangbo, XU Cheng, et al. Research on Cavitation Regions of Upstream Pumping Mechanical Seal Based on Dynamic Mesh Technique[J]. Advances in Mechanical Engineering, 2014,2014:821058.
[15]CHEN Huilong, LI Xinwen, WANG Bin, et al.Influencing Factors on Hydrodynamic Lubrication Failure of Upstream Pumping Mechanical Seal[J]. Journal of Drainage and Irrigation Machinery Engineering, 2018, 36(6):509-516.
[16]刘欢欢. 低温及液态易汽化介质端面密封性能研究[D]. 北京:北京化工大学,2014.
LIU Huanhuan. Study on Performance of End Face Seals Using the Condition of Low Temperature and Easily Vaporized Liquid Medium[D]. Beijing:Beijing University of Chemical Technology, 2014.
[17]蔡纪宁, 史金鑫, 李双喜, 等. 汽液混相机械密封相变半径及影响因素研究[J]. 润滑与密封,2013,38(6):12-16.
CAI Jining, SHI Jinxin, LI Shuangxi, et al. Study on Air-Liquid Mixture Mechanical Seal Phase Transition Adius and Its Influencing Factors[J]. Lubrication Engineering, 2013, 38(6):12-16.
[18]曹恒超, 郝木明, 李振涛, 等. 相变对螺旋槽液膜密封性能的影响[J]. 化工学报,2017,68(8):3190-3201.
CAO Hengchao, HAO Muming, LI Zhentao, et al. Effect of Phase Change on Performance of Spiral Groove Liquid Film Seals[J]. CIESC Journal, 2017, 68(8):3190-3201.
[19]曹恒超, 郝木明, 李振涛, 等. 基于相变效应的内压型螺旋槽液膜密封性能分析[J]. 化工学报,2017,68(9):3532-3540.
CAO Hengchao, HAO Muming, LI Zhentao, et al. Performance Analysis of Internal Pressure Type Spiral Groove Liquid Film Seals Based on Phase Changes[J]. CIESC Journal, 2017, 68(9):3532-3540.
[20]曹恒超, 郝木明, 李振涛, 等. 双列螺旋槽液膜密封相变特性分析[J]. 润滑与密封, 2018, 43(1):15-19.
CAO Hengchao, HAO Muming, LI Zhentao, et al. Analysis of Phase Change Characteristics of Double Spiral Groove Liquid Film Seals[J]. Lubrication Engineering, 2018, 43(1):15-19.
[21]夏冬生, 孙昌国, 于彦, 等.磁致伸缩仪超声空化流的三维非定常数值模拟[J].中国机械工程,2016,27 (22):3061-3067.
XIA Dongsheng, SUN Changguo, YU Yan, et al. 3D Unsteady Numerical Smulation of Magnetostriction-induced Ultrasonic Cavitation Flow[J]. China Mechanical Engineering, 2016,27(22):3061-3067.
[22]于定鹏, 王彬, 邓卫华,等.燃油汽心泵的数值模拟与试验[J]. 中国机械工程,2015,26(17):2389-2393.
YU Dingpeng, WANG Bin, DENG Weihua, et al. Numerical Simulation and Experiments of Vapor Core Pump[J].China Mechanical Engineering, 2015, 26(17):2389-2393.
[23]WALLIS G B. One-dimensional Two-phase Flow[M]. New York:McGraw-Hill Companies, 1969.
[24]姜继海, 季天晶, 李运, 等. 液压流体粘温关系研究[J]. 润滑与密封, 1998, 23(5):35-37.
JIANG Jihai, JI Tianjing, LI Yun, et al. Research on Viscosity-Tempeture Relationship of Hydraulic Oils[J]. Lubrication Engineering, 1998, 23(5):35-37.
[25]杨丽红, 沈航明, 宋元明. 温容器放气过程中对流换热模型的研究[J].中国机械工程,2014, 25(18):2489-2495.
YANG Lihong, SHEN Hangming, SONG Yuanming. Study on Convection Heat Transfer Model of Isothermal Chamber during Discharge[J].China Mechanical Engineering, 2014, 25(18):2489-2495. |