[1]陈雷, 邓明然, 江征风, 等. 基于坐标投影的钢桥螺栓与零件BOM自动生成方法研究[J]. 中国机械工程, 2012, 23(20):2469-2476.
CHEN Lei, DENG Mingran, JIANG Zhengfeng, et al. Study on Automatic Generation Method of BOM of Bolts and Parts of Steel Bridge Based on Coordinates Projection[J]. China Mechanical Engineering, 2012, 23(20):2469-2476.
[2]李操, 商显扬, 周鑫, 等. 箭体结构连接刚度影响因素研究[J]. 中国机械工程, 2018, 29(16):1947-1951.
LI Cao, SHANG Xianyang, ZHOU Xin, et al. Study on Influence Factors of Connection Stiffness of Rocket Structure[J]. China Mechanical Engineering, 2018, 29(16):1947-1951.
[3]李斌斌, 徐宗真, 李鹏, 等. 考虑钉头传载的阶梯搭接钉载分配特性[J]. 航空学报, 2018, 39(7): 221816.
LI Binbin, XU Zongzhen, LI Peng, et al. Characteristics of Bolt Load Distribution of Stepped Lap Joints Considering Load Transferred by Bolt-head[J]. Acta Aeronautica et Astronautica Sinica, 2018, 39(7): 221816.
[4]郁大照, 陈跃良, 高永. 螺栓连接单搭接件疲劳特性试验与全寿命估算方法研究[J]. 中国机械工程, 2013, 24(20):2747-2752.
YU Dazhao, CHEN Yueliang, GAO Yong. Study on Property Tests and Holistic Life Assessment Method for Single Bolted Joints[J]. China Mechanical Engineering, 2013, 24(20):2747-2752.
[5]ERIKSSON I, BCKLUND J, MLLER P. Design of Multiple-row Bolted Composite Joints under General In-plane Loading[J]. Composites Engineering, 1995, 5(8): 1051-1068.
[6]TANG G, YIN L F, GUO X M, et al. Finite Element Analysis and Experimental Research on Mechanical Performance of Bolt Connections of Corrugated Steel Plates[J]. International Journal of Steel Structures, 2015, 15(1): 193-204.
[7]陈齐. 主承力复合材料结构连接方案和失效模式研究[D]. 哈尔滨: 哈尔滨工程大学, 2015.
CHEN Qi. The Main Bearing Composite Joint Scheme and Study of the Failure Mode[D]. Harbin: Harbin Engineering University, 2015.
[8]XIONG Z, GUO X N, LUO Y F, et al. Numerical Analysis of Aluminum Alloy Gusset Joints Subjected to Bending Moment and Axial Force[J]. Engineering Structures, 2017, 152: 1-13.
[9]ZHANG A L, LI S H, JIANG Z Q, et al. Design Theory of Earthquake-resilient Prefabricated Sinusoidal Corrugated Web Beam-column Joint[J]. Engineering Structures, 2017, 150: 665-673.
[10]郁大照, 陈跃良, 张勇, 等. 螺接搭接件的载荷传递特性试验及三维有限元分析[J]. 中国机械工程, 2010, 21(19):2273-2278.
YU Dazhao, CHEN Yueliang, ZHANG Yong. Study on Load Transfer Properties of Bolted Joints Based on Experiments and Three-dimensional Finite Element[J]. China Mechanical Engineering, 2010, 21(19):2273-2278.
[11]KUMAR D V T G P, NAARAYAN S S, SUNDARAM S K, et al. Further Numerical and Experimental Failure Studies on Single and Multi-row Riveted Lap Joints[J]. Engineering Failure Analysis, 2012, 20(3): 9-24.
[12]JOSANDRIAMAMPIANINA, ALKATAN F, STPHAN P, et al. Determining Load Distribution between the Different Rows of Fasteners of a Hybrid Load Transfer Bolted Joint Assembly[J]. Aerospace Science & Technology, 2012, 23(1): 312-320.
[13]中国航空综合技术研究所. HB 1-103-2002 光杆公差带f9六角头螺栓[S]. 北京: 中国航空综合技术研究所, 2003.
AVIC China Aero-polytechnology Establishment. HB 1-103-2002 Hexagon-head Bolts, Shank Tolerance f9[S]. Beijing: AVIC China Aero-polytechnology Establishment, 2003.
[14]马占永. 飞机设计手册 第2册: 标准和标准件[M]. 北京: 航空工业出版社, 2000: 270-272.
MA Zhanyong. Aircraft Design Manual Book 2: Standards and Standard Parts[M]. Beijing: Aviation Industry Press, 2000: 270-272.
[15]邱宣怀. 机械设计[M]. 北京: 高等教育出版社, 1997: 102-103.
QIU Xuanhuai. Machine Design[M]. Beijing: Higher Education Press, 1997: 102-103.
[16]刘向东, 李亚智, 舒怀, 等. 多钉连接钉载分配特性研究方法[J]. 复合材料学报, 2013, 30(1): 210-217.
LIU Xiangdong, LI Yazhi, SHU Huai, et al. Experimental and Numerical Study on the Pin-load Distribution of Multiple-bolted Joints[J]. Acta Materiae Compositae Sinica, 2013, 30(1): 210-217.
[17]石亦平, 周玉蓉. ABAQUS有限元分析实例详解[M]. 北京: 机械工业出版社, 2006: 304-316.
SHI Yiping, ZHOU Yurong. ABAQUSAnalysis and Examples[M]. Beijing: China Machine Press, 2006: 304-316. |