[1]ZHOU J M, NILSSON A, ANDERSSON M, et al. Machining Characteristics of Novel-abrasion Resistant Iron [J]. Journal of Materials Processing Technology, 2004, 153/154: 751-757.
[2]HECK M, ORTNER H M, FLEGE S, et al. Analytical Investigations Concerning the Wear Behavior of Cutting Tools Used for the Machining of Compacted Graphite Iron and Grey Cast Iron [J]. International Journal of Refractory Metals & Hard Materials, 2008, 26:197-206.
[3]GUO Y, MANN J B, YEUNG H, et al. Enhancing Tool Life in High-speed Machining of Compacted Graphite Iron (CGI) Using Controlled Modulation[J]. Tribology Letter, 2012,47:103-111.
[4]KATUKU K, KOURSARIS A, SIGALAS I. Wear Mechanisms of PCBN Cutting Tools When Dry Turning ASTM Grade 2 Austempered Ductile Iron under Finishing Conditions [J]. Wear, 2010, 268:294-301.
[5]MASOOD S H, ARMITAGE K, BRANDT M. An Experimental Study of Laser-assisted Machining of Hard-to-wear White Cast Iron [J]. International Journal of Machine Tools & Manufacture, 2011, 51:450-456.
[6]RAVI A M, MURIGENDRAPPA S M, MUKUNDA P G. Experimental Investigation on Thermally Enhanced Machining of High-chrome White Cast Iron and to Study Its Machinability Characteristics Using Taguchi Method and Artificial Neural Network [J]. International Journal of Advance Manufacturing Technology, 2014, 72: 1439-1454.
[7]CHEN L, ZHOU J M, BUSHLYA V, et al. Performance Assessment of PCBN and BCBN Tools in Machining of High-chromium White Cast Iron [J]. International Journal of Advance Manufacturing Technology, 2015,79:635-644.
[8]潘永智, 艾兴, 唐志涛,等. 基于切削力预测模型的刀具几何参数和切削参数优化 [J]. 中国机械工程,2018,19(4):428-431.
PAN Yongzhi, AI Xing, TANG Zhitao et al. Optimization of Tool Geometry and Cutting Parameters Based on a Predictive Model of Cutting Force[J]. China Mechanical Engineering, 2018,19(4):428-431.
[9]YANG Y, LI J F. Study on Mechanism of Chip Formation during High-speed Milling of Alloy Cast Iron [J]. International Journal of Advance Manufacturing Technology, 2010, 46:43-50.
[10]SCHULZ H, ABELE E, SAHM A. Material Aspects of Chip Formation in HSC Machining [J]. CIRP Annals: Manufacturing Technology, 2001, 50: 45-48. |