Optimization Decision Method of Machine Tool  Resources Based on Bayesian Network under Cloud Manufacturing Environments

Abstract

Abstract: Combined with complex network theory，an optimal selection method for machine tool resources was proposed based on Bayesian network under cloud manufacturing environments.First，a mathematical description of optimal selection for machine tool resources under cloud manufacturing environments was presented.Then an uncertain multi?stage multi?objective decision model was built，which was composed of decision environmental variables，decision selection variables，decision transfer variables，decision target variables，decision value variables and causal dependency.The solution algorithm of the model was studied.Finally，an example was given to validate the applicability and effectiveness of the proposed method.

Key words: cloud manufacturing, machine tool, Bayesian network, optimization decision

摘要： 结合复杂网络理论，提出了一种云制造环境下基于贝叶斯网络的机床装备资源优化选择方法。对云制造环境下机床装备资源优化选择问题进行数学描述，构建了一种由决策环境变量、决策选择变量、决策传递变量、决策目标变量、决策价值变量以及因果依赖关系组成的不确定多阶段多目标（UMM）决策模型，并对该模型的求解算法进行研究；通过实例验证了所提方法的适用性和有效性。

关键词: 云制造, 机床, 贝叶斯网络, 优化决策

CLC Number:

TH166
TP391

GONG Xiaorong, LI Xiaobin, YIN Chao. Optimization Decision Method of Machine Tool Resources Based on Bayesian Network under Cloud Manufacturing Environments[J]. China Mechanical Engineering.

龚小容, 李孝斌, 尹超. [云制造]云制造环境下基于贝叶斯网络的机床装备资源优化决策方法[J]. 中国机械工程.

References

[1]李伯虎，张霖，王时龙，等.云制造：面向服务的网络化制造新模式[J］.计算机集成制造系统，2010，16（1）：1-7.
LI Bohu，ZHANG Lin，WANG Shilong，et al.Cloud Manufacturing：a New Service oriented Networked Manufacturing Model[J］.Computer Integrated Manufacturing Systems，2010，16
（1）：1-7.
[2]李伯虎，张霖，任磊，等.再论云制造[J］.计算机集成制造系统，2011，17（3）：449-457.
LI Bohu，ZHANG Lin，REN Lei，et al.Further Discussion on Cloud Manufacturing[J］.Computer Integrated Manufacturing Systems，2011，17（3）：449-457.
[3]李伯虎，张霖，任磊，等.云制造典型特征、关键技术与应用[J］.计算机集成制造系统，2012，18（7）：1345-1356.
Li Bohu，ZHANG Lin，REN Lei，et al.Typical Characteristics，Technologies and Applications of Cloud Manufacturing[J］.Computer Integrated Manufacturing Systems，2012，18（7）：1345-1356.
[4]张霖，罗永亮，陶飞，等.制造云构建关键技术研究[J］.计算机集成制造系统，2010，16（11）：2510-2520.
ZHANG Lin，LUO Yongliang，TAO Fei，et al.Key Technologies for the Construction of Manufacturing Cloud[J］.Computer Integrated Manufacturing Systems，2010，16（11）：2510-2520.
[5]VALILAI O F，HOUSHMAND M.A Collaborative and Integrated Platform to Support Distributed Manufacturing System Using a Service?oriented Approach Based on Cloud Computing Paredigm[J］.Robotics and Computer?Integrated Manufacturing，2013，29：110-127.
[6]LU Y，XU X，XU J.Development of a Hybrid Manufacturing Cloud[J］.Journal of Manufacturing Systems，2014，33（4）：551-566.
[7]宋庭新，张成雷，李成海，等.中小企业云制造服务平台的研究与开发[J］.计算机集成制造系统，2013，（5）：1147-1154.
SONG Tingxin，ZHANG Chenglei，LI Chenghai，et al.Cloud Manufacturing Service Platform for Small and Medium Enterprises[J］.Computer Integrated Manufacturing Systems，2013，19（5）：1147-1154.
[8]WANG X V，WANG L，GAO L.From Cloud Manufacturing to Cloud Remanufacturing：a Cloud based Approach for WEEE[C］// IEEE International Conference on E?Business Engineering.Coventry，2013：399-406.
[9]WANG L，WANG X V，GAO L，et al.A Cloud?based Approach for WEEE Remanufacturing[J］.CIRP Annals：Manufacturing Technology，2014，63（1）：409-412.
[10]ZHOU J，YAO X.Multi-objective Hybrid Artificial Bee Colony Algorithm Enhanced with Lévy Flight and Self-adaption for Cloud Manufacturing Service Composition[J］.Applied Intelligence，2017，47（3）：721-742.
[11]JIN H，YAO X，CHEN Y.Correlation-aware QoS Modeling and Manufacturing Cloud Service Composition[J］.Journal of Intelligent Manufacturing，2017，28（8）：1947-1960.
[12]LARTIGAU J，XU X，NIE L，et al.Cloud Manufacturing Service Composition Based on QoS with Geo-perspective Transportation Using an Improved Artificial Bee Colony Optimisation Algorithm[J］.International Journal of Production Research，2015，53（14）：4380-4404.
[13]马文龙，朱李楠，王万良.云制造环境下基于 QoS 感知的云服务选择模型[J］.计算机集成制造系统，2014，20（5）：1246-1254.
MA Wenlong，ZHU Linan，WANG Wanliang.Cloud Service Selection Model Based on QoS-aware in Cloud Manufacturing Environment[J］.Computer Integrated Manufacturing Systems，2014，20（5）：1246-1254.
[14]赵道致，李锐.考虑主体心理预期的云制造资源双边匹配机制[J］.控制与决策，2017，32（5）：871-878.
ZHAO Daozhi，LI Rui.Two?sided Resource Matching Mechanism and Stability of Cloud Manufacturing Platform[J］.Control and Decision，2017，32（5）：871-878.
[15]王时龙，宋文艳，康玲，等.云制造环境下的制造资源优化配置研究[J］.计算机集成制造系统，2012，18（7）：1396-1405.
WANG Shilong，SONG Wenyan，KANG Ling，et al.Manufacturing Resource Allocation Based on Cloud Manufacturing[J］.Computer Integrated Manufacturing Systems，2012，18（7）：1396-1405.
[16]高晓光，陈海洋.离散动态贝叶斯网络推理及其应用[M］.北京：国防工业出版社，2016：18-20.
GAO Xiaoguang，CHEN Haiyang.Discrete Dynamic Bayesian Networks Inferen and Its Application[M］.Beijing：Nation Defense Industry Press，2016：18-20.
[17]蔡志强，孙树栋，司书宾，等.不确定环境下多阶段多目标决策模型[J］.系统工程理论与实践，2010，30（9）：1622-1629.
CAI Zhiqiang，SUN Shudong，SI Shubin，et al.Multi-stage and Multi-object Decision Making Model under Uncertainty[J］.Systems Engineering：Theory & Practice，2010，30（9）：1622-1629.
[18]SAATY T L.What is the Analytic Hierarchy Process[M］.Berlin：Springer?Verlag，1988：109-121.

Optimization Decision Method of Machine Tool Resources Based on Bayesian Network under Cloud Manufacturing Environments

[云制造]云制造环境下基于贝叶斯网络的机床装备资源优化决策方法

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

[1]	LIANG Xiaobing, LU Yaoan, WANG Chengyong, . Identification of Position-independent Geometric Errors for Rotary Axes of Five-axis Table-tilting Machine Tools [J]. China Mechanical Engineering, 2023, 34(21): 2585-2591.
[2]	WANG Qianyue, CAO Huajun, LIN Jianghai, LAI Kexu, LI Benjie, GE Weiwei. Exergy Efficiency Analysis and Evaluation Model of Dry-cutting Machine Tools Considering Cooling Energy Consumption [J]. China Mechanical Engineering, 2023, 34(19): 2333-2342.
[3]	LI Jian, MU Zongyi, DU Yanbin, HUANG Guangquan, RAN Yan. Research on Availability Analysis Method of CNC Machine Tools Based on Meta-action [J]. China Mechanical Engineering, 2023, 34(15): 1848-1855.
[4]	LI Zhenjun, ZHAO Chunyu. Thermal Mechanics Coupling Analysis of Angular Contact Ball Bearings Installed in Pairs in Feed System [J]. China Mechanical Engineering, 2023, 34(07): 821-829.
[5]	LI Dongyang, YUAN Dongfeng, ZHANG Haixia, ZHENG Anzhu, DI Zijun, LIANG Daojun, . Research on Intelligent Tool Fault Diagnosis System of Machine Tools with Cloud-Edge-Device Collaboration [J]. China Mechanical Engineering, 2023, 34(05): 584-594.
[6]	JIANG Xuemei, YUAN Zihang, LOU Ping, ZHANG Xiaomei, YAN Junwei, HU Jiwei, . A Collision Detection Method of Heavy-duty CNC Machine Tools Based on Digital Twin [J]. China Mechanical Engineering, 2022, 33(22): 2647-2654，2663.
[7]	CHEN Dongning, HU Yanlong, YAO Chengyu, WANG Kuantong, MA Lei, . Multi-dimensional Dynamic Bayesian Network and Its Importance Measure Analysis Method [J]. China Mechanical Engineering, 2022, 33(19): 2340-2346.
[8]	LU Chengwei, QIAN Bozeng, WANG Huimin, XIANG Sitong. Key Geometric Error Analysis and Compensation Method of Five-axis CNC Machine Tools under Workpiece Feature Decomposition [J]. China Mechanical Engineering, 2022, 33(14): 1646-1653.
[9]	GUO Xipeng, XU Wen, WANG Dingwen, LI Rong, YIN Shaohui. Probe Error Correction Method for Nano-precision On-machine Measurement Systems [J]. China Mechanical Engineering, 2022, 33(09): 1084-1089.
[10]	NI Hengxin, YAN Chunping, SUN Han, XU Teng, HUANG Yigong, ZHOU Chao. Energy Consumption Distribution Characteristics and Prediction Model of High-speed Dry Gear Hobbing Machine [J]. China Mechanical Engineering, 2022, 33(07): 842-851.
[11]	LU Tuanliang, QIU Ming, DONG Yanfang, ZHANG Yatao, DU Hui. Research on Thermally Induced Preload of Machine Tool Spindle Bearings Based on FBG Sensor [J]. China Mechanical Engineering, 2021, 32(17): 2025-2031，2039.
[12]	HU Lai, ZHA Jun, ZHU Yongsheng, WEI Wenming, LI Dongya, LUO Ming, NIU Wentie, CHEN Yaolong. Research Progresses of Basic Equipment Manufacturing and High-grade Integrated CNC Machine Tools [J]. China Mechanical Engineering, 2021, 32(16): 1891-1903.
[13]	LIU Qiang, . Development History and Future Trends of Numerical Control Machine Tools [J]. China Mechanical Engineering, 2021, 32(07): 757-770.
[14]	LU Jianfeng, HAN Tiaojuan, YU Yaoping. Collaboration of Cloud Manufacturing Service Based on Service Choreography [J]. China Mechanical Engineering, 2021, 32(07): 849-859.
[15]	WANG Kang, QI Jinping, ZHOU Yahui, LI Shaoxiong, ZHAO Ruihu, GUO Hao. Reliability Analysis of Train Control Center Based on Discrete-time Bayesian Network [J]. China Mechanical Engineering, 2021, 32(04): 390-398.