Research on Availability Analysis Method of CNC Machine Tools Based on Meta-action

doi:10.3969/j.issn.1004-132X.2023.15.009

Abstract

Abstract: In order to accurately analyze the availability of CNC machine tools， a analyzing method for the availability of CNC machine tools was proposed based on meta-action theory. Firstly， the “function-motion-action” structural decomposition tree was used to decompose the mechanical system， and the basic meta-action and meta-action chain were obtained. And a steady-state availability model was established based on the faults and maintenance data of the constituent components of the meta-action unit. Then， a steady-state availability analysis model for the meta-action chain was established based on Markov process. Finally， a steady-state availability model of the whole machine system was established based on the formation processes of the whole machine system function. Taking the availability analysis of CNC grinding machines as an example， and the proposed method was explained.

Key words: availability, meta-action, CNC machine tool, Markov process

摘要： 为了准确分析数控机床可用性，结合元动作理论，提出了基于元动作的数控机床可用性分析方法。首先通过“功能-运动-动作”结构化分解方法对数控机床进行分解，得到元动作链和元动作，以元动作为最小分析单元，以组成单元零件的故障和维修数据为基础，建立单元稳态可用度模型；然后，结合马尔可夫过程建立元动作链的稳态可用度分析模型；最后，根据整机功能形成过程，建立了整机系统稳态可用度模型。以数控磨床的可用度分析为例，对所提方法进行了说明。

关键词: 可用性, 元动作, 数控机床, 马尔可夫过程

CLC Number:

TG659

LI Jian, MU Zongyi, DU Yanbin, HUANG Guangquan, RAN Yan. Research on Availability Analysis Method of CNC Machine Tools Based on Meta-action[J]. China Mechanical Engineering, 2023, 34(15): 1848-1855.

李健, 慕宗燚, 杜彦斌, 黄广全, 冉琰. 基于元动作的数控机床可用性分析方法研究[J]. 中国机械工程, 2023, 34(15): 1848-1855.

References

［1］冉琰，张根保，庾辉，等. 数控机床可用性研究综述［J］. 河北科技大学学报， 2018， 39（5）：379-385.
RAN Yan， ZHANG Genbao， YU Hui， et al. Research Summary of the Usability of CNC Machine Tools［J］. Journal of Hebei University of Science and Technology， 2018， 39（5）：379-385.
［2］江磊，王小敏，蔺伟. 基于动态贝叶斯网络的列控中心可靠性及可用性评估［J］. 交通运输系统工程与信息， 2018， 18（3）：182-188.
JIANG Lei， WANG Xiaomin， LIN Wei， et al. Reliability and Availability Evaluation of Train Control Center Based on Dynamic Bayesian Network［J］. Journal of Transportation Systems Engineering and Information Technology， 2018， 18（3）：182-188.
［3］江磊，王小敏，刘一骝，等. 基于动态贝叶斯网络的CTCS3-300T列控车载系统运行可靠性及可用性评估［J］. 铁道学报， 2020， 42（3）：85-92.
JIANG Lei， WANG Xiaomin， LIU Yiliu， et al. DBN-based Operational Relaibility and Availability Evaluation of CTCS-300T Onboard System［J］. Journal of the China Railway Society， 2020， 42（3）：85-92.
［4］高剑刚，胡晋，龚道永，等. 神威太湖之光可靠性及可用性设计与分析［J］. 计算机研究与发展， 2021， 58（12）：2696-2707.
GAO Jiangang， HU Jin， GONG Daoyong， et al. Design and Analysis of Reliability and Availability on Sunway Taihu Light［J］. Journal of Computer Research and Development， 2021， 58（12）：2696-2707.
［5］LI R， LIU X， HUANG N. Availability Allocation of Networked Systems Using Markov Model and Heuristics Algorithm［J］. Mathematical Problems in Engineering， 2014， 2014：315385.
［6］MORADI E， ZANDIEH M. Minimizing the Makespan and the System Unavailability in Parallel Machine Scheduling Problem：a Similarity-based Genetic Algorithm［J］. The International Journal of Advanced Manufacturing Technology， 2010， 51（5/8）：829-840.
［7］NEIL M， MARQUEZ D. Availability Modelling of Repairable Systems Using Bayesian Networks［J］. Engineering Applications of Artificial Intelligence， 2012， 25（4）：698-704.
［8］CATELANI M， CIANI L， VENZI M. Sensitivity Analysis with MC Simulation for the Failure Rate Evaluation and Reliability Assessment［J］. Measurement， 2015， 74：150-158.
［9］魏领会，申桂香，张英芝，等. 数控机床可用度建模与仿真［J］. 吉林大学学报（工学版）， 2011， 41（4）：993-997.
WEI Linghui， SHEN Guixiang， ZHANG Yingzhi， et al. Modeling and Simulating Availability of CNC Machine Tools［J］. Journal of Jilin University（Engineering and Technology Edition）， 2011， 41（4）：993-997.
［10］SHEN Guixiang， SUN Shuguang， ZHANG Yingzhi， et al. A Synthetic Method for the Analysis of User Availability Requirements in CNC Machine Tools Availability House［J］. Hydromechatronics Engineering， 2016， 44（12）：31-38.
［11］张英芝，荣峰，申桂香，等. 基于市场竞争及自相关关系的数控机床可用性需求指标权重计算［J］. 计算机集成制造系统， 2016， 22（7）：1687-1694.
ZHANG Yingzhi， RONG Feng， SHEN Guixiang， et al. Weight Calculation for Avability Demand Index of CNC Machine Tools Based on Market Conpetition and Self-correlation［J］. Computer Integrated Manufacturing System， 2016， 22（7）：1687-1694.
［12］李冬英，李梦奇，张根保，等. 元动作装配单元误差源及误差传递模型研究［J］. 机械工程学报， 2015， 51（17）：146-155.
LI Dongying， LI Mengqi， ZHANG Genbao， et al. Mechanism Analysis of Deviation Sourcing and Propagation for Meta-action Assembly Unit［J］. Journal of Mechanical Engineering， 2015， 51（17）：146-155.
［13］LI Y， ZHANG G， WANG Y， et al. Research on Reliability Allocation Technology for NC Machine Tool Meta-action［J］. Quality and Reliability Engineering International， 2019， 35（6）：2016-2044.
［14］YU H， ZHANG G， RAN Y， et al. A Reliability Allocation Method for Mechanical Product Based on Meta-action［J］. IEEE Transactions on Reliability， 2020， 69（1）：373-381.
［15］张生永，冉琰，张根保，等. 精度保持性定量评价与精度退化机理分析［J］. 机械工程学报， 2022， 58（7）：193-213.
ZHANG Shengyong， RAN Yan， ZHANG Genbao， et al. Quantitative Evaluation of Accuracy Retentivity and Analysis of Accuracy Degradation Mechanism［J］. Journal of Mechanical Engineering， 2022， 58（7）：193-213.
［16］李健，冉琰，张根保，等. 机械传动系统运动精度优化分配新方法［J］. 中国机械工程， 2022， 33（9）：1034-1043.
LI Jian， RAN Yan， ZHANG Genbao， et al. Optimal Distribution of Motion Precision of Mechanical Transmission System Based on Meta Action［J］. China Mechanical Engineering， 2022， 33（9）：1034-1043.
［17］李健，张根保，冉琰，等. 基于自由度约束的元动作单元误差传递路径识别方法［J］. 中国机械工程， 2023， 34（2）：135-141.
LI Jian， ZHANG Genbao， RAN Yan， et al. Error Transfer Path Identification Method of Meta-action Unit Based on Degree of Freedom Constraint［J］. China Mechanical Engineering， 2023， 34（2）：135-141.
［18］JIN Chuanxi， RAN Yan， ZHANG Genbao. Reliability Coupling Mechanism Analyses of T-translation-type Contemporaneous Meta-action in CNC Machine Tools［J］. International Journal of Advanced Manufacturing Technology， 2023， 124，（11/12）：4523-4549.
［19］范晋伟，王鸿亮，张兰清，等. 数控磨床可靠性建模及评估研究［J］. 制造技术与机床， 2016（6）：94-97.
FAN Jinwei， WANG Hongliang， ZHANG Lanqing， et al. Research on Reliability Modeling and Evaluation of CNC Grinding Machine［J］. Manufacturing Technology & Machine Tool， 2016（6）：94-97.
［20］王烨，郑庆元. 基于威布尔模型的数控机床可靠性分析［J］. 机械工程师， 2014（4）：41-43.
WANG Ye， ZHENG Qingyuan. Reliability Evaluation of CNC Machine Tools Based on Weibull Model［J］. Mechanical Engineer， 2014（4）：41-43.

[1]	LI Zhenjun, ZHAO Chunyu. Thermal Mechanics Coupling Analysis of Angular Contact Ball Bearings Installed in Pairs in Feed System [J]. China Mechanical Engineering, 2023, 34(07): 821-829.
[2]	LI Dongyang, YUAN Dongfeng, ZHANG Haixia, ZHENG Anzhu, DI Zijun, LIANG Daojun, . Research on Intelligent Tool Fault Diagnosis System of Machine Tools with Cloud-Edge-Device Collaboration [J]. China Mechanical Engineering, 2023, 34(05): 584-594.
[3]	LI Jian, ZHANG Genbao, RAN Yan, WANG Yongqin. Error Transfer Path Identification Method of Meta-action Unit Based on DOF Constraints#br# [J]. China Mechanical Engineering, 2023, 34(02): 135-141.
[4]	JIANG Xuemei, YUAN Zihang, LOU Ping, ZHANG Xiaomei, YAN Junwei, HU Jiwei, . A Collision Detection Method of Heavy-duty CNC Machine Tools Based on Digital Twin [J]. China Mechanical Engineering, 2022, 33(22): 2647-2654，2663.
[5]	LU Chengwei, QIAN Bozeng, WANG Huimin, XIANG Sitong. Key Geometric Error Analysis and Compensation Method of Five-axis CNC Machine Tools under Workpiece Feature Decomposition [J]. China Mechanical Engineering, 2022, 33(14): 1646-1653.
[6]	LI Jian, RAN Yan, ZHANG Genbao, WANG Yongqin. A New Method for Optimal Distribution of Kinematic Accuracy of Mechanical Transmission Systems [J]. China Mechanical Engineering, 2022, 33(09): 1034-1043.
[7]	CHEN Yifan, ZHANG Genbao, RAN Yan, LI Yulong, YU Hui, . Meta-action-oriented Reliability Allocation Method of Mechanical Transmission Systems [J]. China Mechanical Engineering, 2021, 32(17): 2032-2039.
[8]	HU Lai, ZHA Jun, ZHU Yongsheng, WEI Wenming, LI Dongya, LUO Ming, NIU Wentie, CHEN Yaolong. Research Progresses of Basic Equipment Manufacturing and High-grade Integrated CNC Machine Tools [J]. China Mechanical Engineering, 2021, 32(16): 1891-1903.
[9]	GUI Lin;LI Sheng. Status and Development Trend of Domestic Heavy-duty CNC Machine Tools [J]. China Mechanical Engineering, 2020, 31(23): 2780-2787,2797.
[10]	LI Congbo;YIN Yuxian;XIAO Qinge;LONG Yun;ZHAO Xikun. Data-driven Energy Consumption Prediction Method of CNC Turning Based on Meta-action [J]. China Mechanical Engineering, 2020, 31(21): 2601-2611.
[11]	LIU Xuemei；LIU Tao；GUO Huan. Optimization of Buffer Allocations in Hybrid Production Lines Based on Availability Evaluation [J]. China Mechanical Engineering, 2020, 31(18): 2220-2230.
[12]	FU Guoqiang, RAO Yongjian, XIE Yunpeng, GAO Hongli, DENG Xiaolei. Error Sensitivity Analysis of Motion Axis for Five-axis CNC Machine Tools with Geometric Error Contribution [J]. China Mechanical Engineering, 2020, 31(13): 1518-1528.
[13]	HUANG Zhi, LIU Yongchao, DENG Tao, ZHOU Tao, ZHU Yun. A Method for Thermal Error Modeling of FAMT [J]. China Mechanical Engineering, 2020, 31(13): 1529-1538.
[14]	JU Pinghua, CHEN Zi, RAN Yan, XIAO Bing. Key Assembly Quality Control Point Judgment Method in Motion Mechanisms Based on PLSR [J]. China Mechanical Engineering, 2020, 31(13): 1562-1569.
[15]	LIU Hongyi, FAN Rui, GUO Jiangzhen, ZHANG Wei, ZHAO Qinzhi, CHEN Wuyi. Multi-axis Loading Device for Reliability Tests of CNC Machine Tools [J]. China Mechanical Engineering, 2020, 31(13): 1606-1612.