Design of Multi-channel Data Acquisition Device for Sheet Metal Multiple Point Incremental Forming Force

China Mechanical Engineering ›› 2012, Vol. 23 ›› Issue (24): 2913-2917.

Previous Articles Next Articles

Design of Multi-channel Data Acquisition Device for Sheet Metal Multiple Point Incremental Forming Force

Cai Gaipin;Xing Congwen;Luo Xiaoyan;Jiang Zhihong

Jiangxi University of Science and Technology,Ganzhou,Jiangxi,341000

Online:2012-12-25 Published:2013-01-06
Supported by:
National Natural Science Foundation of China（No. 50975131）

板料多点渐进成形力多通道数据采集装置设计

蔡改贫;邢聪文;罗小燕;姜志宏

江西理工大学,赣州,341000

基金资助:
国家自然科学基金资助项目(50975131)
National Natural Science Foundation of China（No. 50975131）

Abstract

Abstract:

According to the characteristics of longer acquisition time and larger quantity of data of forming force in incremental forming process,a multi-channel and time sharing data acquisition device based on AT89S51 was designed.The paper introduced the work principles of detecting device for the forming force,
and gave parts of the hardware circuit and software programs.The force curve with deforming time was got by experiments,and shows the detection device fits the data
requirements for long periods of time,uninterrupted,and continuous acquisition in incremental forming process.

Key words: incremental forming, single chip microcomputer, forming force, data acquisition

摘要：

针对渐进成形过程中成形力采集时间长、数据量大的特点,设计了一种基于AT89S51单片机的多路分时数据采集装置,介绍了成形力检测的工作原理，开发了检测装置的硬件电路和软件程序;通过渐进成形实验,获得了成形力随时间变化的曲线,表明该检测装置符合渐进成形过程对数据长时间、不间断、连续采集的要求。

关键词: 渐进成形, 单片机, 成形力, 数据采集

CLC Number:

TG37

CA Gai-Pin, GENG Cong-Wen, LUO Xiao-Yan, JIANG Zhi-Hong. Design of Multi-channel Data Acquisition Device for Sheet Metal Multiple Point Incremental Forming Force[J]. China Mechanical Engineering, 2012, 23(24): 2913-2917.

蔡改贫, 邢聪文, 罗小燕, 姜志宏. 板料多点渐进成形力多通道数据采集装置设计[J]. 中国机械工程, 2012, 23(24): 2913-2917.

[1]	TUN Jian, Jocher Dietrich, LI Jiang. Research on Sheet Metal Digital Incremental Forming Technology without Support [J]. J4, 201016, 21(16): 2002-2005,2015.
[2]	YANG Fan, LI Jingwei, LI Yiguo, BI Tao. Design and Implementation of Maglev Trains Levitation Data Acquisition System [J]. China Mechanical Engineering, 2021, 32(04): 467-474.
[3]	QIN Qin1,2 ；HE Liu1；LI Cheng2；ZANG Yong1. Research on Springback Defects in Incremental Forming of Cu-Al Bimetal [J]. China Mechanical Engineering, 2021, 32(03): 348-356.
[4]	LI Ming, DAI Peipei, CHANG Zhidong, CHEN Jun, . Springback Control and Compensation of Incremental Forming for Sheet Metal Parts with Open Geometric Feature [J]. China Mechanical Engineering, 2020, 31(22): 2723-2727.
[5]	LI Yuxi1,2;LI Yan1;CUI Limu1;MIAO Zhihong1. Research on Influence Factors of Cold Roll-beating Forming Forces of Leadscrews [J]. China Mechanical Engineering, 2020, 31(09): 1065-1073.
[6]	HOU Xiaoli;LI Yan;YANG Mingshun;BAI Lang;SHI Xun;ZHANG Chengxing. Research on FLC in CNC Single Point Incremental Forming of Aluminum Sheets [J]. China Mechanical Engineering, 2020, 31(08): 960-967.
[7]	ZHU Hu1;XIAO Dongxuan1;KANG Jaeguan2. STL Model Based Interference Check and Correction in Double Sided CNC Incremental Forming [J]. China Mechanical Engineering, 2019, 30(23): 2890-2897.
[8]	BAI Lang;LI Yan;YANG Mingshun;LIN Yunbo;ZHAO Renfeng;YUAN Qilong. Research on Overall Accuracy of SPIF Parts [J]. China Mechanical Engineering, 2019, 30(22): 2748-2756.
[9]	SHI Xun;LI Yan;YANG Mingshun;YAO Zimeng;HOU Xiaoli. Study on Single Point Incremental Forming Processes of Corrugated Tubes [J]. China Mechanical Engineering, 2018, 29(20): 2507-2514.
[10]	WANG Hongbin1;WANG Hong1;HE Qun2;WANG Yueling1;ZHOU Zhen1. Condition Monitoring Method for Wind Turbine Main Bearings Based on DBN [J]. China Mechanical Engineering, 2018, 29(08): 948-953.
[11]	CHEN Jiping;QIAN Jianqing;WANG Huiting. Study on Wall Thickness Prediction Accuracy by Sine Law for Incrementally Formed Conical Parts [J]. China Mechanical Engineering, 2017, 28(22): 2760-2766.
[12]	ZHU Hu;WANG Hepo;XING Yufei. Generation of Contour Path with Unequal Layer Distances in CNC Incremental Forming [J]. China Mechanical Engineering, 2017, 28(17): 2135-2141.
[13]	LI Long;LI Yan;CUI Limu;HUANG Geng;YANG Mingshun. Finite Element Numerical Simulation of Forming Forces and Metal Deformations in Cold Roll-beating Forming Processes [J]. China Mechanical Engineering, 2017, 28(16): 1951-1959.
[14]	YAO Zimeng, LI Yan, YANG Mingshun, ZHANG Jingchong, ZHANG Chengxing. Optimization of Deformation Energy in Single Point Incremental Forming Processes Using Response Surface Methodology [J]. China Mechanical Engineering, 2017, 28(07): 862-866.
[15]	Xu Jiahui, Gao Lin, Shi Xiaofan, An Chuanhai. Research on Defects of Spherical Parts with Small Curvature by NC Incremental Forming [J]. China Mechanical Engineering, 2014, 25(23): 3164-3167.

Design of Multi-channel Data Acquisition Device for Sheet Metal Multiple Point Incremental Forming Force

板料多点渐进成形力多通道数据采集装置设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics