Solar Focussing and Tracking Interlocks for Photovoltaic and Thermal Integration Device

China Mechanical Engineering ›› 2011, Vol. 22 ›› Issue (21): 2536-2540.

Previous Articles Next Articles

Solar Focussing and Tracking Interlocks for Photovoltaic and Thermal Integration Device

Xu Zhilong;Liu Judong;Wang Chengzhi;Huang Zhongming;Hou Dapan;Zhang Yaoming

Jimei University,Xiamen,Fujian, 361021

Online:2011-11-10 Published:2011-11-16
Supported by:

National High-tech R&D Program of China (863 Program) （No. 2006AA050203）;

Fujian Provincial Science and Technology Key Program ( No. 2008H0031)

聚光跟踪光伏光热一体机联动装置的研制

许志龙;刘菊东;王成志;黄种明;侯达盘;张耀明

集美大学,厦门,361021

基金资助:
国家高技术研究发展计划(863计划)资助项目(2006AA050203)；福建省科技计划重点项目(2008H0031)；张耀明院士太阳能项目科研启动基金资助项目(C60521)；集美大学创新团队基金资助项目(2009A001)
National High-tech R&D Program of China (863 Program) （No. 2006AA050203）;

Fujian Provincial Science and Technology Key Program ( No. 2008H0031)

Abstract

Abstract:

The light focusing efficiency is largely influenced by the solar tracking accuracy of light focusing devices. A new interlock for solar tracking was discussed. The interlock device driven by two electric screws had the azimuth shaft and the elevation linkage frame, hence many condensing units were driven simultaneously and it can track the changes of solar elevation and azimuth synchronously. The tracking error analyses by analytical method and experiments show that the interlock device moves stably with high tracking accuracy and the light focusing efficiency has increased by 5%, and hence the photovoltaic generation cost is decreased.

Key words:

tracking mechanism, condensing unit structure, interlock, photovoltaic thermal

摘要：

针对聚光器跟踪太阳的准确度对聚光效率影响很大,提出了一种太阳跟踪联动装置。采用两根电动推杆驱动聚光器的方位角传动轴和高度角联动架,实现了多个聚光单元同步跟踪太阳高度角和方位角的变化。经分析跟踪误差并经实验验证,该聚光器跟踪装置运行稳定、传动精度高,聚光效率提高了5%,降低了光伏发电的成本。

关键词:

跟踪装置, 聚光单元, 联动装置, 光伏光热

CLC Number:

TH12

HU Zhi-Long, LIU Ju-Dong, WANG Cheng-Zhi, HUANG Chong-Meng, HOU Da-Pan, ZHANG Yao-Meng.

Solar Focussing and Tracking Interlocks for Photovoltaic and Thermal Integration Device

[J]. China Mechanical Engineering, 2011, 22(21): 2536-2540.

许志龙, 刘菊东, 王成志, 黄种明, 侯达盘, 张耀明.

聚光跟踪光伏光热一体机联动装置的研制

[J]. 中国机械工程, 2011, 22(21): 2536-2540.

[1]	YANG Feng, LUO Shijie, YANG Jianghong, WANG Yingjun, . A GPU-accelerated High-efficient Multi-grid Algorithm for ITO [J]. China Mechanical Engineering, 2024, 35(04): 602-613.
[2]	ZHANG Meng, ZHANG Songlin, LIU Yuwei, LIU Shicheng, FAN Pengju. Optimal Design of Piezo-based Actuated Systems in Tunable Diode Lasers [J]. China Mechanical Engineering, 2024, 35(04): 656-665.
[3]	LI Rongqi, YAN Tao, HE Zhicheng, MI Dong, JIANG Chao, ZHENG Jing. A Topology Optimized Design Method for High-performance Structures with Fluid-thermal-mechanics Coupling [J]. China Mechanical Engineering, 2024, 35(03): 487-497.
[4]	GAO Jin, CUI Haibing, FAN Tao, LI Ang, DU Zunfeng. A Structural Reliability Calculation Method Based on Adaptive Kriging Ensemble Model [J]. China Mechanical Engineering, 2024, 35(01): 83-92.
[5]	CHENG Xianfu, ZHANG Zhihong, WANG Chenghui, PAN Yifei. Product Architectures Evolution and Their Open Design Strategies [J]. China Mechanical Engineering, 2024, 35(01): 109-124.
[6]	ZHU Zongming, JI Suqiang, WANG Hao, TANG Puhua, LIANG Liang. Hemodynamics Analysis of Interventional Robots in Diagnosis and Treatment Based on Fluid-structure Interaction [J]. China Mechanical Engineering, 2023, 34(21): 2592-2599.
[7]	QU Xiaozhang, ZHANG Jiabei, ZHAI Fangzhi. Sensitivity Analysis and Optimization of High Speed Train Cooling Centrifugal Fan Performance [J]. China Mechanical Engineering, 2023, 34(20): 2504-2512.
[8]	XIAO Gang, ZHANG Bin, LI Shichun, YAN Huijun, YANG Qinwen. Design and Service Performance Optimization of Induction Heating Methanol Reforming Devices Based on Fluid Pressure Drop Control [J]. China Mechanical Engineering, 2023, 34(17): 2048-2057,2076.
[9]	QU Xiaozhang, ZHANG Jiabei, ZHAI Fangzhi. Reliability-based Analysis for Two-phase Flow of Locomotive Side Wall Filtration Systems with Non-random Load Uncertainty [J]. China Mechanical Engineering, 2023, 34(15): 1881-1889.
[10]	GENG Xueqing, WU Mengwu, HUA Lin, . Study on Design of Wheel-leg Deformable Wheel and Vehicle Control [J]. China Mechanical Engineering, 2023, 34(12): 1446-1452.
[11]	YAN Meng, LI Tao, YANG Chen, WANG Mingyu, YANG Dongdong. Calculation Method of LCA Parameters for Green Design and Assessment Collaboration of Electromechanical Products [J]. China Mechanical Engineering, 2023, 34(12): 1453-1464.
[12]	TAO Liang, ZHANG Dashan, ZHANG Xiaolong, PAN Deng, ZHAN Qingliang. Design and Experiments of Special Rim Assembly for Intelligent Tire Development Platform [J]. China Mechanical Engineering, 2023, 34(09): 1111-1119.
[13]	LIU Jisheng, JI Liang, LI Wei, JIA Zhixin, CHENG Jinxin, FANG Pengcheng. Efficient Optimization Design Method of Centrifugal Impellers Based on Multi-surrogate Model [J]. China Mechanical Engineering, 2023, 34(08): 899-907.
[14]	WANG Xinyuan, ZHOU Jinyu, XIE Liyang, CHENG Jinxiang. Adaptive Subdivision-Importance Sampling Method for Solving Structural Reliability [J]. China Mechanical Engineering, 2023, 34(03): 300-306，313.
[15]	YANG Shixiang, LI Wenqiang, SHAO Zhehui, . Investigation and Application on Overall Design Method of Complex Electromechanical Systems [J]. China Mechanical Engineering, 2023, 34(01): 47-54.

Solar Focussing and Tracking Interlocks for Photovoltaic and Thermal Integration Device

聚光跟踪光伏光热一体机联动装置的研制

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics